- Joined
- Aug 31, 2011
- Messages
- 3,078
Steel: A2
Heat Treat: Paul Bos, for 60 R.C.
Handle: Natural Ebony, Stainless Steel Pins, G-Flex Epoxy
Finish: Mixture of five parts beeswax, one part paraffin wax, and one part 3-in-1 Oil, which I melt into the wood, and hand burnish.
Sheath: 8-9 oz Hermann Oak cow hide, generously protected with Sno-seal.
Tip to Handle: 3 1/2"
Cutting Edge: 3 1/8"
OAL: approx. 7 7/16".
This one has a few imperfections, so don't expect it to be spectacularly perfect. I have done my best to capture everything in the pictures: Small scratches here and there, and some of the dark left from heat treat, at the plunge lines.
[Was $90] NOW $75 with sheath, $60 without sheath. includes Priority shipping in USA. Canada add $2. No other destinations, please.
I prefer paypal, and my address is seniorof81@yahoo.com
First unconditional "I'll take it" gets it.
In this next picture, it may look like scuffs right near the spine. That is just Sno-seal smudged on there. I wiped it off. Those other areas are sanding mistakes.
Heat Treat: Paul Bos, for 60 R.C.
Handle: Natural Ebony, Stainless Steel Pins, G-Flex Epoxy
Finish: Mixture of five parts beeswax, one part paraffin wax, and one part 3-in-1 Oil, which I melt into the wood, and hand burnish.
Sheath: 8-9 oz Hermann Oak cow hide, generously protected with Sno-seal.
Tip to Handle: 3 1/2"
Cutting Edge: 3 1/8"
OAL: approx. 7 7/16".
This one has a few imperfections, so don't expect it to be spectacularly perfect. I have done my best to capture everything in the pictures: Small scratches here and there, and some of the dark left from heat treat, at the plunge lines.
[Was $90] NOW $75 with sheath, $60 without sheath. includes Priority shipping in USA. Canada add $2. No other destinations, please.
I prefer paypal, and my address is seniorof81@yahoo.com
First unconditional "I'll take it" gets it.






In this next picture, it may look like scuffs right near the spine. That is just Sno-seal smudged on there. I wiped it off. Those other areas are sanding mistakes.


Last edited: