- Joined
- Aug 17, 2014
- Messages
- 4,914
Alright, I've been putting off all the stuff I need to sell for too long, so here we go. Got to move a bunch of stuff along that has been sitting on my desk way too long. These are for sale only, no trades, and all transactions will be by PayPal Goods and Services. The prices include shipping in the United States only and all paypal fees. PM or email me for paypal info or with any questions (email address below).
Up for sale I have the following:
Hinderer XM18 3.5" Skinny Slicer No Choil: This example has been lightly carried and used on paper and a couple packages. This is the DLT exclusive skinny model with the working finish/satin flats and M390 Steel. Scale on this one is Grey G10. Box and all original documents are included. Knife is running on bears as it came from the ranch and the action, lockup, and centering are all fantastic. I did sharpen this one at 20 degrees per side on my Wicked Edge, and it is hair shaving sharp. Price is $OLD
Hinderer XM18 3" Non-Flipper Spearpoint: This is probably the most perfect 3” XM18 I’ve had, but it just doesn’t get carried, so it needs a new home. It has also been lightly carried and used on paper and a couple packages. The steel on this one is 20CV and the finish is full stonewash, and I have added a Hinderer factor TI scale (the most recent version with the internal milling). Also comes with the original black G10 scale and liner AND an additional purple G10 scale. I’m not open to splitting them up, it all needs to go together. Box and all original documents are included. Knife is running on bears as it came from the ranch and the action, lockup, and centering are all fantastic. I did sharpen this one at 17 degrees per side on my Wicked Edge, and it is hair shaving sharp. Price is $OLD
TRM Atom: This one has been carried and used some. Possibly some minor snail trails on the pocket clip, but no other scratches or flaws that I can find. Steel is 20CV, action, centering, and lockup are all on point on this one, very smooth action on washers. Comes with 2 sets of micarta scales, the original flat OD green micarta scales, and the 3D Wing patterned natural micarta scales that are pictured. Both are factory from TRM. Box and all original papers are included. I sharpened this one on my Wicked Edge at 16 degrees per side and the edge on this one is fresh and hair popping sharp. Price for this one is $OLD
Cheburkov Small Strizh: This is the full TI linerlock version with M390 steel. Another light user with some snail trails on the pocket clip. No other wear that I can detect. Perfect detent, lockup, action, and centering on this one. Has not been disassembled and is still wearing the razor sharp factory edge. Comes with box and all original paperwork. Price on this one is $OLD
Alliance Designs Mini Slim Pickens: Yet another user in very good condition. Has some snail trails on the pocket clip and scales from carry. Perfect detent, lockup, action, and centering on this one. Action is nice and snappy on the open and smooth on the close. I have sharpened this one on my Wicked Edge at 16 degrees per side, and the edge is still hair popping sharp. Comes with box and all original paperwork. Price on this one is $OLD
Benchmade 535-3 Bugout: This is the carbon fiber/S90V version. Carried a few times but has seen little cutting beyond the paper cut test. Solid lockup, smooth action, and on point centering on this one. I have sharpened this one on my Wicked Edge at 16 degrees per side, and the edge is still hair popping sharp. Comes with box and all original paperwork. Price on this one is $OLD
Benchmade 535BK-2101: This is the M4/OD green G10 version from Smoky Mountain Knifeworks. I have removed the original scales and installed stonewashed TI scales from Flytanium, the Crossfade model, which fit them fantastically. The original G10 scales have never been carried on the knife, and they are included. The knife has been carried a few times and has broken down several cardboard boxes. Solid lockup, extremely smooth drop shut action on this one, and on point centering. I have sharpened this one on my Wicked Edge at 16 degrees per side, and the edge is still hair popping sharp, I have stropped it on 1 micron diamond strop to maintain the edge. Comes with box and all original paperwork. Price on this one is $225
Giant Mouse ACE Sonoma V2: Carried a couple of times and flipped a bit, but no real use on this one. I did sharpen it on the Wicked Edge as I did not like the factory edge on this one. It is a hair popping 17 degree per side edge now. Centering, lockup, flipping action are all perfect, as one would expect from a Reate made knife. Original box and paperwork are included. Price on this one is $140
Spyderco Advocate: Carried a couple of times and flipped a bit, but no real use on this one. I sharpened this one on the Wicked Edge as well, since I did not like the factory edge on this one either. It is a hair popping 19 degree per side edge now. Centering, lockup, flipping action are all dialed in perfectly on this one. This is one of the CQI’d versions with the updated bearings and washers from Spyderco. Original box and paperwork are included. Price on this one is $185
Spyderco Sage 1 Maxamet: This one is a user and has been carried and broken down a good bit of cardboard in its time. Still wearing the factory edge, which I have stropped with a 1 Micron diamond strop to maintain a shaving sharp edge. No scratches or significant signs of wear on the blade that I can find, no patina, etc. Blade is perfectly centered, action is smooth, and lockup is sold. Comes with box and original paperwork. Cost on this one is $175
Some pics for your consideration are below. Due to the size of this sale, I don’t have detail pics loaded in this thread. However, if you would like some for any individual knife, just let me know and I’ll provide them as quickly as possible for you.
Prices are all in via paypal only, and include all shipping and paypal fees. Shipping in the United States only. NO TRADES, funds need to be recouped, you know how it is.
First "I'll take it" followed by an email or PM gets it. You can email me at halden.doerge at gmail. Check my feedback and buy with confidence. I stand behind all my knives and, where applicable, sharpening work. If you want additional pics, I am happy to provide them, just email or PM me, but an "I'll take it" always takes priority over a pic request.
Please only post “I’ll take it” comments in the thread itself. DM me with any questions or offers and I’ll get back to you ASAP.
NOTE ON SHIPPING: I will be traveling some in the next week due to the Holidays but I will be actively monitoring this thread and respond quickly to anyone looking to purchase any of the above knives. I will make absolutely sure to give everyone accurate timeframes for shipping etc. Usually I get stuff out within a day of the sale, but I might not be able to do that at all points over the upcoming Holiday times.
Thanks in advance, BF!
Up for sale I have the following:
Hinderer XM18 3.5" Skinny Slicer No Choil: This example has been lightly carried and used on paper and a couple packages. This is the DLT exclusive skinny model with the working finish/satin flats and M390 Steel. Scale on this one is Grey G10. Box and all original documents are included. Knife is running on bears as it came from the ranch and the action, lockup, and centering are all fantastic. I did sharpen this one at 20 degrees per side on my Wicked Edge, and it is hair shaving sharp. Price is $OLD
Hinderer XM18 3" Non-Flipper Spearpoint: This is probably the most perfect 3” XM18 I’ve had, but it just doesn’t get carried, so it needs a new home. It has also been lightly carried and used on paper and a couple packages. The steel on this one is 20CV and the finish is full stonewash, and I have added a Hinderer factor TI scale (the most recent version with the internal milling). Also comes with the original black G10 scale and liner AND an additional purple G10 scale. I’m not open to splitting them up, it all needs to go together. Box and all original documents are included. Knife is running on bears as it came from the ranch and the action, lockup, and centering are all fantastic. I did sharpen this one at 17 degrees per side on my Wicked Edge, and it is hair shaving sharp. Price is $OLD
TRM Atom: This one has been carried and used some. Possibly some minor snail trails on the pocket clip, but no other scratches or flaws that I can find. Steel is 20CV, action, centering, and lockup are all on point on this one, very smooth action on washers. Comes with 2 sets of micarta scales, the original flat OD green micarta scales, and the 3D Wing patterned natural micarta scales that are pictured. Both are factory from TRM. Box and all original papers are included. I sharpened this one on my Wicked Edge at 16 degrees per side and the edge on this one is fresh and hair popping sharp. Price for this one is $OLD
Cheburkov Small Strizh: This is the full TI linerlock version with M390 steel. Another light user with some snail trails on the pocket clip. No other wear that I can detect. Perfect detent, lockup, action, and centering on this one. Has not been disassembled and is still wearing the razor sharp factory edge. Comes with box and all original paperwork. Price on this one is $OLD
Alliance Designs Mini Slim Pickens: Yet another user in very good condition. Has some snail trails on the pocket clip and scales from carry. Perfect detent, lockup, action, and centering on this one. Action is nice and snappy on the open and smooth on the close. I have sharpened this one on my Wicked Edge at 16 degrees per side, and the edge is still hair popping sharp. Comes with box and all original paperwork. Price on this one is $OLD
Benchmade 535-3 Bugout: This is the carbon fiber/S90V version. Carried a few times but has seen little cutting beyond the paper cut test. Solid lockup, smooth action, and on point centering on this one. I have sharpened this one on my Wicked Edge at 16 degrees per side, and the edge is still hair popping sharp. Comes with box and all original paperwork. Price on this one is $OLD
Benchmade 535BK-2101: This is the M4/OD green G10 version from Smoky Mountain Knifeworks. I have removed the original scales and installed stonewashed TI scales from Flytanium, the Crossfade model, which fit them fantastically. The original G10 scales have never been carried on the knife, and they are included. The knife has been carried a few times and has broken down several cardboard boxes. Solid lockup, extremely smooth drop shut action on this one, and on point centering. I have sharpened this one on my Wicked Edge at 16 degrees per side, and the edge is still hair popping sharp, I have stropped it on 1 micron diamond strop to maintain the edge. Comes with box and all original paperwork. Price on this one is $225
Giant Mouse ACE Sonoma V2: Carried a couple of times and flipped a bit, but no real use on this one. I did sharpen it on the Wicked Edge as I did not like the factory edge on this one. It is a hair popping 17 degree per side edge now. Centering, lockup, flipping action are all perfect, as one would expect from a Reate made knife. Original box and paperwork are included. Price on this one is $140
Spyderco Advocate: Carried a couple of times and flipped a bit, but no real use on this one. I sharpened this one on the Wicked Edge as well, since I did not like the factory edge on this one either. It is a hair popping 19 degree per side edge now. Centering, lockup, flipping action are all dialed in perfectly on this one. This is one of the CQI’d versions with the updated bearings and washers from Spyderco. Original box and paperwork are included. Price on this one is $185
Spyderco Sage 1 Maxamet: This one is a user and has been carried and broken down a good bit of cardboard in its time. Still wearing the factory edge, which I have stropped with a 1 Micron diamond strop to maintain a shaving sharp edge. No scratches or significant signs of wear on the blade that I can find, no patina, etc. Blade is perfectly centered, action is smooth, and lockup is sold. Comes with box and original paperwork. Cost on this one is $175
Some pics for your consideration are below. Due to the size of this sale, I don’t have detail pics loaded in this thread. However, if you would like some for any individual knife, just let me know and I’ll provide them as quickly as possible for you.
Prices are all in via paypal only, and include all shipping and paypal fees. Shipping in the United States only. NO TRADES, funds need to be recouped, you know how it is.
First "I'll take it" followed by an email or PM gets it. You can email me at halden.doerge at gmail. Check my feedback and buy with confidence. I stand behind all my knives and, where applicable, sharpening work. If you want additional pics, I am happy to provide them, just email or PM me, but an "I'll take it" always takes priority over a pic request.
Please only post “I’ll take it” comments in the thread itself. DM me with any questions or offers and I’ll get back to you ASAP.
NOTE ON SHIPPING: I will be traveling some in the next week due to the Holidays but I will be actively monitoring this thread and respond quickly to anyone looking to purchase any of the above knives. I will make absolutely sure to give everyone accurate timeframes for shipping etc. Usually I get stuff out within a day of the sale, but I might not be able to do that at all points over the upcoming Holiday times.
Thanks in advance, BF!
Last edited:
