Hello Blade Forum! I’ve got some great stuff from common to very rare. I WILL NOT EMAIL YOU REQUESTING PAYMENT. All prices are shipped CONUS. Please watch videos for detailed condition of each item and feel free to ask any questions. FIRST TO CLAIM IN THE POST HERE AND FOLLOW WITH A PM FOR PAYMENT TAKES IT. I also reserve the right to choose my buyer, though 99.99% of the time this is the first user to claim as described above. Thanks for looking!
CHECK BACK OFTEN FOR PRICE DROPS
SHAMANS:
1. “Tree Rex” Rex45 sprint run with original wood scales. This knife is incredible and the blade is in the top 5% sharpest factory edges I’ve ever seen. Only cut a couple of pieces of paper. Factory fresh except a small scratch or superficial crack shown in the video. Doesn’t weaken the scale from my careful examination and I don’t think you’d see it unless it was pointed out or the light hit it just right. Comes with box and paperwork though the box is a little worn. Video $305
2. 15v sprint run. I’ve owned a few of these and this was going to be my personal safe queen. It had the best action of any of the ones I owned and the stonewash has a unique sparkly quality that I didn’t experience on any other 15v knife. It doesn’t capture properly in the video so you’ll be in for a nice surprise. However, I keep buying too many other knives so I have to sell. Factory fresh except a missing clip screw and a few very faint marks on the G10. Comes with box and paperwork. Video$270 SOLD
CUSTOM KWAIKEN FIXED BLADE:
www.bladeforums.com
PARA 3’S:
1. REC exclusive Para 3 in 10v DLC. Comes with all the REC swag, box, and paperwork. Second owner. Factory edge that has seen some very light carry and cutting. A few faint marks on the DLC that I did my best to show in the video below and a few subtle marks on the G10. They’d probably come right off with a magic eraser. A mark on the side of clip as well. Video $170
2. Para 3 Cruwear DLT exclusive. Second owner, very light use and carry around the house a few times. Factory edge. Has some smudges on DLC that’ll come off with alcohol or soap and water. Comes with box and paperwork. Video $170
3. S45vn/black G10. I was saving this to swap another blade into but I’m going in a different direction. I kept this specific knife for a swap because it’s fantastic and not all para 3’s are created equal! Snappy detent, good centering, and drops shut with truly no blade play. S45vn blade has a tiny chip in the tip but I’m pretty sure Spyderco will fix it for free. Otherwise it’ll sort itself out in subsequent sharpenings. Tip is still sharp. Factory edge, second owner, no carry, and only some light cutting. No box. Video$120 SOLD
MANIX 2’S:
1. Cruwear smooth G10 exclusive (factory second). This was my main keeper manix and it’s incredible. I have too many knives now though so it’s on the chopping block. I swapped textured G10 on and I’ll include the smooth G10. Super sharp factory edge. A couple tiny tiny dings towards the tip which is probably why it’s a second. They can be easily sharpened out. Video$135 SOLD
2. S30v (April 2023). Second owner and it shows some light signs of use. Factory edge and still super sharp. Comes with box and paperwork. Video$120 SOLD
NATIVE 5:
1. S90v and fluted carbon fiber. The best variant of this knife. This thing is an amazing cutter with a super sharp factory edge. There’s a small nick in the blade you can see in the video but it’s subtle and will come out on your first sharpening. Video $230
PARTS AND SCALES:
1. Manix 2 backspacers for swapping the blade from a lightweight (LW) into aftermarket scales. These are precision CNC milled.$18 each or $30 for 2 SOLD
2. Spyderco factory G10 for para 3. I have 4 sets available. 2 forest green, 1 grey, and 1 black. All show signs of light use but have only been carried a couple of times each. $25 each, $43 for 2, $62 for 3, or all 4 for $80
3. Lynch NW deep carry clip for para 3. This is a lefty version in a black finish. Only carried once or twice around the house. Comes with screws. $20
4. Spyderco spoon clip. Standard issue clip$10 SOLD
5. OD green manix 2 micarta scales. These are brand new and never mounted. They are more tan than green but they look and feel great. $50
6. Para 3 OEM factory hardware kit. Complete set of silver Spyderco factory hardware plus some extra pieces for spares.$35 SOLD
TSPROF DIAMOND STONES:
www.bladeforums.com
CHECK BACK OFTEN FOR PRICE DROPS
SHAMANS:
1. “Tree Rex” Rex45 sprint run with original wood scales. This knife is incredible and the blade is in the top 5% sharpest factory edges I’ve ever seen. Only cut a couple of pieces of paper. Factory fresh except a small scratch or superficial crack shown in the video. Doesn’t weaken the scale from my careful examination and I don’t think you’d see it unless it was pointed out or the light hit it just right. Comes with box and paperwork though the box is a little worn. Video $305
2. 15v sprint run. I’ve owned a few of these and this was going to be my personal safe queen. It had the best action of any of the ones I owned and the stonewash has a unique sparkly quality that I didn’t experience on any other 15v knife. It doesn’t capture properly in the video so you’ll be in for a nice surprise. However, I keep buying too many other knives so I have to sell. Factory fresh except a missing clip screw and a few very faint marks on the G10. Comes with box and paperwork. Video
CUSTOM KWAIKEN FIXED BLADE:
Stuart Branson custom Kwaiken (with gorgeous hamon line and leather sheath) *PRICE DROP*
This was the first serious knife in my collection but I’ve moved on to preferring folders in almost every case. Absolutely stunning knife that I waited nearly a year for and I’d love for it to go to a good home now. First to claim in the post and follow with payment PM takes it. Timestamp...
www.bladeforums.com
PARA 3’S:
1. REC exclusive Para 3 in 10v DLC. Comes with all the REC swag, box, and paperwork. Second owner. Factory edge that has seen some very light carry and cutting. A few faint marks on the DLC that I did my best to show in the video below and a few subtle marks on the G10. They’d probably come right off with a magic eraser. A mark on the side of clip as well. Video $170
2. Para 3 Cruwear DLT exclusive. Second owner, very light use and carry around the house a few times. Factory edge. Has some smudges on DLC that’ll come off with alcohol or soap and water. Comes with box and paperwork. Video $170
3. S45vn/black G10. I was saving this to swap another blade into but I’m going in a different direction. I kept this specific knife for a swap because it’s fantastic and not all para 3’s are created equal! Snappy detent, good centering, and drops shut with truly no blade play. S45vn blade has a tiny chip in the tip but I’m pretty sure Spyderco will fix it for free. Otherwise it’ll sort itself out in subsequent sharpenings. Tip is still sharp. Factory edge, second owner, no carry, and only some light cutting. No box. Video
MANIX 2’S:
1. Cruwear smooth G10 exclusive (factory second). This was my main keeper manix and it’s incredible. I have too many knives now though so it’s on the chopping block. I swapped textured G10 on and I’ll include the smooth G10. Super sharp factory edge. A couple tiny tiny dings towards the tip which is probably why it’s a second. They can be easily sharpened out. Video
2. S30v (April 2023). Second owner and it shows some light signs of use. Factory edge and still super sharp. Comes with box and paperwork. Video
NATIVE 5:
1. S90v and fluted carbon fiber. The best variant of this knife. This thing is an amazing cutter with a super sharp factory edge. There’s a small nick in the blade you can see in the video but it’s subtle and will come out on your first sharpening. Video $230
PARTS AND SCALES:
1. Manix 2 backspacers for swapping the blade from a lightweight (LW) into aftermarket scales. These are precision CNC milled.
2. Spyderco factory G10 for para 3. I have 4 sets available. 2 forest green, 1 grey, and 1 black. All show signs of light use but have only been carried a couple of times each. $25 each, $43 for 2, $62 for 3, or all 4 for $80
3. Lynch NW deep carry clip for para 3. This is a lefty version in a black finish. Only carried once or twice around the house. Comes with screws. $20
4. Spyderco spoon clip. Standard issue clip
5. OD green manix 2 micarta scales. These are brand new and never mounted. They are more tan than green but they look and feel great. $50
6. Para 3 OEM factory hardware kit. Complete set of silver Spyderco factory hardware plus some extra pieces for spares.
TSProf Diamond stone set
First to claim in this post with a payment PM to follow takes them! I’m the original owner and I’ve sharpened two knives on them so they have tons of life left. I will include an extra 220 grit stone making this more than a complete set. Purchased brand new from Gritomatic. $75 shipped CONUS...
www.bladeforums.com
Attachments
Last edited:
