- Joined
- Feb 21, 2017
- Messages
- 797
Hello forum , I would like to offer you those two knives .
It's the first dagger with bark handle that I make. I though that it will be a fitting matterial with it's good traction. As you can see the shape is loosely based on the FS design.
Steel - N690Co 58-59 HRC.
OAL - 273mm (~10.7")
Blade - 148Х28Х5.3mm (~5.8x1.1x0.2") flat grind with secondary bevels
Blade finish - p 800
Handle - birch bark and bronze
Leather sheath with wooden inlay
More pics
Price 265 USD Including PP fees and priority shipping with tracking
Paypal only please.
tosheto8205@gmail.com ( this e-mail can also be used to contact me )
The knife goes to the first "I'll take it."
===================================================
And the well known design of the puukko. I alternated 2 types of bark for the "zebra" pattern. Also I left the mill finish on the non beveled parts of the blade.
Steel - Elmax 60-61 HRC.
OAL - 245mm (~9.6")
Blade - 122Х25Х3.8mm (~4.8x1x0.15") flat grind with micro secondary bevel
blade finish - p 800 and mill finish
Handle - birch bark and bronze
Leather sheath with wooden inlay
More pics
Price SOLD Including PP fees and priority shipping with tracking
Paypal only please.
tosheto8205@gmail.com ( this e-mail can also be used to contact me )
The knife goes to the first "I'll take it."
It's the first dagger with bark handle that I make. I though that it will be a fitting matterial with it's good traction. As you can see the shape is loosely based on the FS design.
Steel - N690Co 58-59 HRC.
OAL - 273mm (~10.7")
Blade - 148Х28Х5.3mm (~5.8x1.1x0.2") flat grind with secondary bevels
Blade finish - p 800
Handle - birch bark and bronze
Leather sheath with wooden inlay
More pics
Price 265 USD Including PP fees and priority shipping with tracking
Paypal only please.
tosheto8205@gmail.com ( this e-mail can also be used to contact me )
The knife goes to the first "I'll take it."
===================================================
And the well known design of the puukko. I alternated 2 types of bark for the "zebra" pattern. Also I left the mill finish on the non beveled parts of the blade.
Steel - Elmax 60-61 HRC.
OAL - 245mm (~9.6")
Blade - 122Х25Х3.8mm (~4.8x1x0.15") flat grind with micro secondary bevel
blade finish - p 800 and mill finish
Handle - birch bark and bronze
Leather sheath with wooden inlay
More pics
Price SOLD Including PP fees and priority shipping with tracking
Paypal only please.
tosheto8205@gmail.com ( this e-mail can also be used to contact me )
The knife goes to the first "I'll take it."
Last edited:
