Black G10 Linerless Warncliff

Patrickknives

Patrickknives

Feedback: +14 / =0 / -0
Joined
Dec 13, 2006
Messages
2,415
I dont need to add this to my knife collection so I dropped the price, this is the very tight knife and works well. I need the cash more than the knife so here is a better price. thanks for all the great comments.

I wanted to make a lightweight working knife. This really lightweight to carry in your pocket all day and really tough. A2 is a tool steel and this will cut.

Has great snap to the open, half stop and closed position, This has good stiff spring tension, strong lock in open position but smooth. Spring is flush in all three positions. Full flat grind to 400 hand finish

Black G10 Handles
Steel is A2,
Blade is 1/8 by 2 7/8" (2 3/8 Sharp part), 5/8 width
Overall length is 7
Pins are 416 Stainless Steel

Sold

Price includes shipping , Paypal prefered but I have always worked with customers to meet their payment needs.

Thanks for looking.


G10Folder028.jpg


G10Folder026.jpg


G10Folder025.jpg



G10Folder030.jpg
 
Last edited:
Patrick, very nice. Is the blade ground really thin towards the edge to make it a slicer, or a little beefier as an 'all round' cutter ?
roland
 
The blade is about 0.02 which will be a good working thinkness, A2 is pretty tough so you can go thin, flat grind also helps the edge hold up.

Thanks
 
I have one of Patrick"s flat grinds in A2, and have to say the edge really holds up and is tough. Great working knife that you can use rather then admire.
 
Does this knife have a complete steel spacer. I see it on the bottom of one of the photos but cannot see it all. One photo that is missed here. The back spine of the kife.

cajun
 
nativecajun57 said:
Does this knife have a complete steel spacer. I see it on the bottom of one of the photos but cannot see it all. One photo that is missed here. The back spine of the kife.

cajun
Click to expand...

There's no spacer. It's a linerless Shadow. I also have one of these, though mine's a little bigger (4 1/8" with slightly over 3" blade) & in tan micarta. Excellent working knife, BTW.
 
You must log in or register to reply here.
Back
Top