Jokkamofeenanay
Gold Member
- Joined
- Sep 21, 2018
- Messages
- 474
After recently landing a Les George VECP, as well as a titanium 3V Demko 20.5, I need to make some cuts elsewhere in my small collection to stay within self-imposed limits. So, I’m going to have to part with these two very cool knives, both of which are close to LNIB, only being carried just a few times each and not used to cut anything.
Prometheus Design Werx SPD STS-B
This a design-forward kind of knife, with first-rate fit and finish and nice action to boot (drop shut on close); however, it also stands on its own as a very good tool. It features a clip-point M390 blade and Ti bolster lock with OD green linen micarta inlays. Prometheus Design Werx makes some really nice stuff, albeit overpriced, so I’m going to take a pretty big chunk off the retail price ($370….ouch) for this almost like new and very cool knife.
I'm asking $295 by PayPal G&S ($285 by PayPal F&F) for the Prometheus Design Werx SPD STS-B.
SOLDPM2 black DLC S45VN
First up is a PM2 with S45VN black DLC blade. I added some Flytanium shred carbon fiber Lotus scales and bronze anodized titanium hardware, including a Lynch deep carry "fauxmascus" clip. This one has only been carried twice, and I haven’t cut anything with the sharp factory edge. Centering is right down the middle and action is good, albeit with a tiny bit of lock stick. Includes original black G-10 scales, Not sure what I did with the original clip and hardware, but if I find ‘em (not a sure thing), I’ll include ‘em.
I'm asking $275 by PayPal G&S ($265 by PayPal F&F) for this very special PM2. All in all, I've invested a little over $315 in this ($185 for stock PM2, $85 for Flytanium scales, $28 for Lynch clip, and $20 for the screws/hardware).
Not interested in trades at this time. Thanks for checking this out.
Prometheus Design Werx SPD STS-B
This a design-forward kind of knife, with first-rate fit and finish and nice action to boot (drop shut on close); however, it also stands on its own as a very good tool. It features a clip-point M390 blade and Ti bolster lock with OD green linen micarta inlays. Prometheus Design Werx makes some really nice stuff, albeit overpriced, so I’m going to take a pretty big chunk off the retail price ($370….ouch) for this almost like new and very cool knife.
I'm asking $295 by PayPal G&S ($285 by PayPal F&F) for the Prometheus Design Werx SPD STS-B.
SOLD
First up is a PM2 with S45VN black DLC blade. I added some Flytanium shred carbon fiber Lotus scales and bronze anodized titanium hardware, including a Lynch deep carry "fauxmascus" clip. This one has only been carried twice, and I haven’t cut anything with the sharp factory edge. Centering is right down the middle and action is good, albeit with a tiny bit of lock stick. Includes original black G-10 scales, Not sure what I did with the original clip and hardware, but if I find ‘em (not a sure thing), I’ll include ‘em.
I'm asking $275 by PayPal G&S ($265 by PayPal F&F) for this very special PM2. All in all, I've invested a little over $315 in this ($185 for stock PM2, $85 for Flytanium scales, $28 for Lynch clip, and $20 for the screws/hardware).
Not interested in trades at this time. Thanks for checking this out.
Last edited:
.