Production Fixed
Hello All, I'm mixing things up a bit here, so.... here we go... (again X 3)
5. Blackjack Knives / Edge Design Inc. Shining Mountains Bowie
Specifications
Blade Steel : 52-100 High Carbon Steel
Blade Length : 10 1/2 in.
OAL Length : 16 in.
American Walnut Handle
Leather Sheath
1/4 in. thick spine
These are excellent choppers, I had two prior to getting this one recently on a trade deal. This knife was designed by Mike Stewart, named by Ken Warner and produced by Blackjack Knives when they were in their Effingham IL facility for a St. Louis based knife company called Edge Design Inc. They were made circa 1996 / 1997, right before Blackjack closed their doors in Effingham. They are of exceptional quality and are quite rare.
Condition Note: Approximately 98%. There are two marks on the blade on the presentation side and two on the backside all four of which are by the logos on both sides. The pics show these marks. Original edge, never sharpened and never appears to have cut anything. On another note though, it appears that when they put this one together they forgot to match up the scales of American Walnut in terms of the coloration as the pics show
Price: $300.00 (SPF)
8. Shadow Tech Knives
Specifications
Blade Steel : 1095 Powder Coated (RC: 57-58)
Blade Length : 3 1/4 in.
OAL Length : 7 in.
Cord Wrapped Handle
Green DigiCamo Horizontal Carry Kydex Sheath
Condition Note : ~ 98% ; a few small rub marks on the blade, presumably from the sheath.
Price : $50.00
30. Cold Steel 'Kwaiken'
Specifications
Blade Steel : Damascus
Blade Length : 6 5/8 in.
OAL Length : 10 in.
Hardwood Sheath and handle w/ cloth carrying case.
There's not a makers mark on this knife to be found. I also DO NOT have the box or papers but the cutlery is indeed a long since discontinued Cold Steel 'Kwaiken' model.
Condition Note : 98%, everything is virtually NIB but there are some VERY minute scratches on the tip of the blade presumably from inserting the knife into the sheath. Worth noting is that the Damascus steel has a VERY light etch. It's not nearly as pronounced as most of the other Damascus that I have experience with. That said, it was somewhat hard to photograph the 'grain' of the Damascus but under the right lighting it is very attractive and appears to be very well made.
Price: $210.00
33. Cold Steel Terminator Push Dagger
Specifications
Blade Steel : 440C Stainless Steel
Blade Length : 3 3/4 in.
OAL Length : 6 in.
Knife comes with original box and leather sheath.
This is Cold Steels first double edged push dagger brought out circa 1990.
Condition Note : This knife is approximately 98% as received from the factory. It has the original edge and has a few very faint scuff marks on the blade, presumably from taking the knife in and out of the leather sheath.
Price: $200.00
38. Cold Steel 'Master Hunter Plus'
Specifications
Blade Steel : Carbon V
Blade Length : 4 1/2 in.
OAL Length : 9 1/4 in.
This USA Made Cold Steel have long been discontinued. Well, at least the variant with Carbon V blade steel and being American Made. It also has a Kraton Handle as well as a Kydex Sheath. This knife comes with the original box, paperwork, sheath and original cardboard sleeve that the blade sets in.
Condition Note : The knife is in approximately 98 % condition. It has the original factory edge and has no signs of any use or carry what-so-ever. There are, however, a couple small spots of discoloration on both sides of the blade.
Price: $115.00
As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.
All prices are inclusive of S&H in the U.S., there will be a 4% charge on PP, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.
It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.
I reserve the right to refuse sales to anyone for any reason. If you have red rep, I won't sell to you, don't ask! You'd only be wasting your time and energy.
First Ill take it gets the cutlery.
My paypal address is : jj-guns (at) hot mail (dot) com
All trades will be considered at this time. Low ball offers will be ignored.
Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
Hello All, I'm mixing things up a bit here, so.... here we go... (again X 3)
5. Blackjack Knives / Edge Design Inc. Shining Mountains Bowie
Specifications
Blade Steel : 52-100 High Carbon Steel
Blade Length : 10 1/2 in.
OAL Length : 16 in.
American Walnut Handle
Leather Sheath
1/4 in. thick spine
These are excellent choppers, I had two prior to getting this one recently on a trade deal. This knife was designed by Mike Stewart, named by Ken Warner and produced by Blackjack Knives when they were in their Effingham IL facility for a St. Louis based knife company called Edge Design Inc. They were made circa 1996 / 1997, right before Blackjack closed their doors in Effingham. They are of exceptional quality and are quite rare.
Condition Note: Approximately 98%. There are two marks on the blade on the presentation side and two on the backside all four of which are by the logos on both sides. The pics show these marks. Original edge, never sharpened and never appears to have cut anything. On another note though, it appears that when they put this one together they forgot to match up the scales of American Walnut in terms of the coloration as the pics show
Price: $300.00 (SPF)
8. Shadow Tech Knives
Specifications
Blade Steel : 1095 Powder Coated (RC: 57-58)
Blade Length : 3 1/4 in.
OAL Length : 7 in.
Cord Wrapped Handle
Green DigiCamo Horizontal Carry Kydex Sheath
Condition Note : ~ 98% ; a few small rub marks on the blade, presumably from the sheath.
Price : $50.00
30. Cold Steel 'Kwaiken'
Specifications
Blade Steel : Damascus
Blade Length : 6 5/8 in.
OAL Length : 10 in.
Hardwood Sheath and handle w/ cloth carrying case.
There's not a makers mark on this knife to be found. I also DO NOT have the box or papers but the cutlery is indeed a long since discontinued Cold Steel 'Kwaiken' model.
Condition Note : 98%, everything is virtually NIB but there are some VERY minute scratches on the tip of the blade presumably from inserting the knife into the sheath. Worth noting is that the Damascus steel has a VERY light etch. It's not nearly as pronounced as most of the other Damascus that I have experience with. That said, it was somewhat hard to photograph the 'grain' of the Damascus but under the right lighting it is very attractive and appears to be very well made.
Price: $210.00
33. Cold Steel Terminator Push Dagger
Specifications
Blade Steel : 440C Stainless Steel
Blade Length : 3 3/4 in.
OAL Length : 6 in.
Knife comes with original box and leather sheath.
This is Cold Steels first double edged push dagger brought out circa 1990.
Condition Note : This knife is approximately 98% as received from the factory. It has the original edge and has a few very faint scuff marks on the blade, presumably from taking the knife in and out of the leather sheath.
Price: $200.00
38. Cold Steel 'Master Hunter Plus'
Specifications
Blade Steel : Carbon V
Blade Length : 4 1/2 in.
OAL Length : 9 1/4 in.
This USA Made Cold Steel have long been discontinued. Well, at least the variant with Carbon V blade steel and being American Made. It also has a Kraton Handle as well as a Kydex Sheath. This knife comes with the original box, paperwork, sheath and original cardboard sleeve that the blade sets in.
Condition Note : The knife is in approximately 98 % condition. It has the original factory edge and has no signs of any use or carry what-so-ever. There are, however, a couple small spots of discoloration on both sides of the blade.
Price: $115.00
As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.
All prices are inclusive of S&H in the U.S., there will be a 4% charge on PP, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.
It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.
I reserve the right to refuse sales to anyone for any reason. If you have red rep, I won't sell to you, don't ask! You'd only be wasting your time and energy.
First Ill take it gets the cutlery.
My paypal address is : jj-guns (at) hot mail (dot) com
All trades will be considered at this time. Low ball offers will be ignored.
Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
Last edited: