Wissahickon Knives
@wissahickon_knives
- Joined
- Jul 19, 2017
- Messages
- 41
Hey everybody, I've got four bushcraft/camp knives up for grabs this week. They're also all about thirty-forty bucks cheaper than what they're listed for on my website (consider it a BladeForums special). Without further gibberish from me...
Just kidding, one more bit of gibberish... all photos were from before edges were applied. Only the scandi is zero ground.
Kelpius:
9 inches overall, 4.5 inch blade length. 1/8" O1 tool steel (59 RHC). Forced patina, jimping, belt finish, full flat grind.
Handle is stabilized and dyed black ash burl with red G10 liners, brass corby bolts and a 5/16" lanyard tube.
Asking: $225 which includes US shipping (Forty bucks off of website price).
-------------------------------------------------------------------------------------------------
Mapmaker:
8.5 inches overall, 4 inch blade. 1/8" A2 tool steel (60 RHC) hand rubbed finish, sharp 90° spine. Full flat grind.
Handle is stabilized and dyed redwood with 1/8" OD green G10 liners, brass corby bolts and a 5/16" lanyard tube.
Asking:SOLD
---------------------------------------------------------------------------------------------------
Critter (Scandi):
7 inches overall. 2 7/8 inch blade length. 3/32" 1095 (58 RHC). Scandi ground with hand rubbed flats, forced patina, and jimping.
Handle is blaze orange G10 and ivory paper micarta with black G10 liners and brass corby bolts.
Asking: SOLD
---------------------------------------------------------------------------------------------------
Critter (Saber):
7 inches overall, 2 7/8 inch blade length. 3/32" 1095 (58 RHC). Saber ground with machine finish on bevels/hand rubbed finish on flats. Jimping and forced patina.
Handle is green canvas micarta with orange G10 liners and brass corby bolts.
Asking: SOLD
If you want to see additional photos let me know and I'll send what I have. Paypal is preferred but I can also take Venmo if you'd rather. Thanks for having a look!
-Matt
Just kidding, one more bit of gibberish... all photos were from before edges were applied. Only the scandi is zero ground.
Kelpius:
9 inches overall, 4.5 inch blade length. 1/8" O1 tool steel (59 RHC). Forced patina, jimping, belt finish, full flat grind.
Handle is stabilized and dyed black ash burl with red G10 liners, brass corby bolts and a 5/16" lanyard tube.
Asking: $225 which includes US shipping (Forty bucks off of website price).
-------------------------------------------------------------------------------------------------
Mapmaker:
8.5 inches overall, 4 inch blade. 1/8" A2 tool steel (60 RHC) hand rubbed finish, sharp 90° spine. Full flat grind.
Handle is stabilized and dyed redwood with 1/8" OD green G10 liners, brass corby bolts and a 5/16" lanyard tube.
Asking:SOLD
---------------------------------------------------------------------------------------------------
Critter (Scandi):
7 inches overall. 2 7/8 inch blade length. 3/32" 1095 (58 RHC). Scandi ground with hand rubbed flats, forced patina, and jimping.
Handle is blaze orange G10 and ivory paper micarta with black G10 liners and brass corby bolts.
Asking: SOLD
---------------------------------------------------------------------------------------------------
Critter (Saber):
7 inches overall, 2 7/8 inch blade length. 3/32" 1095 (58 RHC). Saber ground with machine finish on bevels/hand rubbed finish on flats. Jimping and forced patina.
Handle is green canvas micarta with orange G10 liners and brass corby bolts.
Asking: SOLD
If you want to see additional photos let me know and I'll send what I have. Paypal is preferred but I can also take Venmo if you'd rather. Thanks for having a look!
-Matt
Last edited: