BladeTech tek-lock Jr. buckle...

N

Nakano 2

Joined
Jan 1, 1999
Messages
4,025
Can anyone provide the hole to hole measurement for this particular buckle piece? Additionally, what is the MAX belt width it will accomodate? Jr. model that is. Thanks.

Oh yes, anyone have an extra one they' re willing to part with? E mail me if you like.

L8r,
Nakano

------------------
"To earn a million is easy, a real friend is not."
 


Hello!

I hope tis is clear enough...

The outside holes are one inch on center.

The center hole on each side is at ½ inch from the outside ...

Across the face you have an 11/16 and a 1-3/8 spread...At least to my eyes
smile.gif


The clip is 1-1/2 inches wide exactly...

Running Dog


------------------
Running Dog Knife Company
<A HREF="mailto:
runningdog@dog.com[/EMAIL]
mmurphy@premier1.net">
runningdog@dog.com
mmurphy@premier1.net</A> [url="http://www.runningdogknife.bigstep.com"]www.runningdogknife.bigstep.com[/url]
 
I giveup. You got me.
smile.gif



I have the standard buckle hinge topside in front of me, NOT the smaller model which I need the specs for. I see 7 holes, 3 at the top horizontally, 1 just below those in the middle, and 3 more below that in a horizontal line. What is the measurement in mm or inches of the distance between the top left to the top middle CENTER to CENTER? Top left to bottom middle center? Bottom middle to top right? The rest should fall into place. Keep in mind that I need the measurements for the SMALLER unit. Thanks.

L8r,
Nakano

PS- who has an extra small buckle to give up? sell? trade?
 
Ok, I'll try again...

Small Tec-Loc, hinge up, I see 9 holes in three rows of three...

000
000
000

Top left hole to top middle hole, 1/2 inch on center...

Top left to bottom middle is 1-1/8 inch on center...

Bottom middle to top right is also 1-1/8 inch on center...

I hope this helps...

Running Dog

------------------
Running Dog Knife Company
<A HREF="mailto:runningdog@dog.com[/EMAIL]
mmurphy@premier1.net">runningdog@dog.com
mmurphy@premier1.net</A> [url="http://www.runningdogknife.bigstep.com"]www.runningdogknife.bigstep.com[/url]
 
Thank you RD! Much clearer. I did not know that the smaller buckle had 9 holes. One more measurement please (since my edit attempt in my last reply didn' t work): the top left to the middle hole in center row?

L8r,
Nakano
 
Just checking to see if my sig cleared up...

BTW, I really like the tec-loc but I hope if it gets redesigned they round off the edges...It's a bit square...pokes me in the side sometimes...Maybe that's because I'm a bit round...
smile.gif


Running Dog

------------------
Running Dog Knife Company
<A HREF="mailto:runningdog@dog.com[/EMAIL]

http://www.runningdogknife.bigstep.com

mmurphy@premier1.net">runningdog@dog.com

http://www.runningdogknife.bigstep.com

mmurphy@premier1.net</A>
 
Clear your SIG?!?! As in P226?
smile.gif


Thanks RD. But the max belt width man! You forgot to include that. Can it fit a 1.5 belt? If not, can that slide adjusting bar be removed to allow for a 1.5" belt?

 
The sig is not working right...Glad I still got the 38
smile.gif


No my sig file is still showing the UBB code...Didn't used to do that...

So much for the hot link...
frown.gif


The clip is exactly 1.5 inches wide...as stated in the first message...Might not fit some belts...Works fine for 1.25 inch dress belts...

There is no adjustable bar on this model...

Lucky for me I had already decided on this spacing before the new clips came out...They fit on our sheaths without modification...

I take it you are making a sheath to fit?

Sorry I don't have any to spare at this time...I'll need to get some more myself...

Running Dog

------------------
Running Dog Knife Company
http://www.runningdogknife.bigstep.com
runningdog@dog.com
mmurphy@premier1.net
 
Actually I had a few sheaths already. And was thinking of using these mini Tek Loks for them. I was trying to gauge the distance necessary for drilling holes and to see if the existing riveted holes would be in the way. Thanks for all the info. But darn that limited belt width... hmmm, back to the drawing board I guess.

L8r,
Nakano
 
You must log in or register to reply here.
Back
Top