- Joined
- Dec 21, 2006
- Messages
- 3,158
This was one of my first knives, and as such, I wanted to hold onto it as my personal hunter. I ended up making a different knife for myself, and as much as it pains me to let this go, it is time. It is a factory second, if you will. When I etched the logo, some of the etch left a ghost line to the left of the "S". Of course, this does not affect performance in any way. The knife locks into my hand when gripped. Every one who holds it says the same thing. This steel came from Dictum.
9" OAL
Blade is 4"
Handle is 5"
Blue 2/wrought iron san mai
.110" thick, full flat grind to .015" edge
Walnut with thin black and white G10 liners
brass pins
But wait, we're not done yet. There's more! Call now and you'll receive not ONE but TWO knives for the price of one! That's right, folks. If you order within the next quadrillion minutes, I'll include a second knife free! No charge! Not even extra shipping and handling. Huh?
I've been holding on to another knife because I was not proud of the finish on the blade. This was one of my very first knives, and getting the sabre grind line sharp was giving me fits. I ended up with a few light scratches on the ricasso that if I try to remove, I'm afraid I would be back to square one with the sabre grind being washed out. I included a pic of the scratches. But hey, it's free. Initially the plan was to do a zero scandi, but there is a secondary edge bevel and not true scandi.
W2 tool steel @ 61HRC
.125" thick
Walnut handle
9" OAL, 4" blade, 5" handle
BOTH knives, yours for only SOLD. Both knives are "sans sheath". Knives only. This price does, however, include shipping anywhere in the lower 48 states. If you would like it shipped elsewhere, by all means simply contact me and we will arrange the charges. Thank you!
paypal address is samuraistuart@yahoo.com
Stuart Davenport Knives
San Antonio, TX
samuraistuart@yahoo.com
brass pins
9" OAL
Blade is 4"
Handle is 5"
Blue 2/wrought iron san mai
.110" thick, full flat grind to .015" edge
Walnut with thin black and white G10 liners
brass pins
But wait, we're not done yet. There's more! Call now and you'll receive not ONE but TWO knives for the price of one! That's right, folks. If you order within the next quadrillion minutes, I'll include a second knife free! No charge! Not even extra shipping and handling. Huh?
I've been holding on to another knife because I was not proud of the finish on the blade. This was one of my very first knives, and getting the sabre grind line sharp was giving me fits. I ended up with a few light scratches on the ricasso that if I try to remove, I'm afraid I would be back to square one with the sabre grind being washed out. I included a pic of the scratches. But hey, it's free. Initially the plan was to do a zero scandi, but there is a secondary edge bevel and not true scandi.
W2 tool steel @ 61HRC
.125" thick
Walnut handle
9" OAL, 4" blade, 5" handle
BOTH knives, yours for only SOLD. Both knives are "sans sheath". Knives only. This price does, however, include shipping anywhere in the lower 48 states. If you would like it shipped elsewhere, by all means simply contact me and we will arrange the charges. Thank you!
paypal address is samuraistuart@yahoo.com
Stuart Davenport Knives
San Antonio, TX
samuraistuart@yahoo.com
brass pins
Last edited: