- Joined
- May 2, 2013
- Messages
- 1,711
I have two up. Both brand new in the box with all paperwork. Never carried or used to cut anything. No wear, no scratches. A dab of Tru-oil on the pivots and flipped a couple of times each.
First the Benchmade 761 Ti Monolock. This thing is just pure perfection. I have one I carry all the time now, and is just flat outstanding. A flick of the thumb stud and this thing glides open on the bearings like it is levitating. Locks up quick and tight. The lock has a small ledge to ensure lockup stops right where it is designed no matter how hard it is flung open. Zero lock stick and zero wiggle. Perfectly centered in every direction open and closed. The very thin frame cut due to the lock design ensures no crud gets in from the side, and an open back to the frame allows whatever would get in to fall free.
Kind of plain Jane on first glance. But the pins and back spacers are embellished, and the pocket clip (tip down on this one) is a milled 3d design. Not bent flat stock. All titanium aside from the blade which is M390, corrosion resistant and holds a wicked edge. Razor sharp factory edge on this one.
Asking >>>$sold PayPal Friends/Family or $sold for Goods/Services. I'll cover insured US shipping at this price.
The second is a Boker Plus Skellern designed Titanium front flipper 01BO133 'Exskeliber.' Also new in the box. This knife is just plain cool... The front flipper design takes a few flicks to get used to, but after you do, deployment is fast and intuitive. As a bonus, the jimped edge of the flipper hump can be used against a pants leg or similar surface to open the knife one handed. This feature along with the very thin titanium frame make this knife incredibly thin. Literally disappears in a pocket. And the anodized titanium pocket clip is also very low profile. Lockup is smooth, just a hint of lock stick on a firm opening but I'm sure that will go away with some use. Grind is flat more or less, with just a hint of a hollow grind going on. Brushed uniform finish and hologram laser etched blade logo give this thing a very clean appearance. Blade is centered and has zero play.
Asking sold F&F for this one sold G&S. Also shipped US insured.
I don't get notified of PM's/Conversations here yet with the new setup so please email. Eric@overmountain.us.com is my personal email but not my PayPal. I will send PayPal info to buyer only. I reserve the right to sell to whomever I choose, but first claim here or email timestamp will generally take it. Not looking for trades at this time. Reasonable offers will be responded to, low balls or offers I'm not interested in; don't be offended but I simply just won't respond. Available until I indicate sold here on this initial post. Will indicate in title too if I'm able. Sometimes doesn't want to cooperate...
Pics, Benchmade first:
Boker in next post...
First the Benchmade 761 Ti Monolock. This thing is just pure perfection. I have one I carry all the time now, and is just flat outstanding. A flick of the thumb stud and this thing glides open on the bearings like it is levitating. Locks up quick and tight. The lock has a small ledge to ensure lockup stops right where it is designed no matter how hard it is flung open. Zero lock stick and zero wiggle. Perfectly centered in every direction open and closed. The very thin frame cut due to the lock design ensures no crud gets in from the side, and an open back to the frame allows whatever would get in to fall free.
Kind of plain Jane on first glance. But the pins and back spacers are embellished, and the pocket clip (tip down on this one) is a milled 3d design. Not bent flat stock. All titanium aside from the blade which is M390, corrosion resistant and holds a wicked edge. Razor sharp factory edge on this one.
Asking >>>$sold PayPal Friends/Family or $sold for Goods/Services. I'll cover insured US shipping at this price.
The second is a Boker Plus Skellern designed Titanium front flipper 01BO133 'Exskeliber.' Also new in the box. This knife is just plain cool... The front flipper design takes a few flicks to get used to, but after you do, deployment is fast and intuitive. As a bonus, the jimped edge of the flipper hump can be used against a pants leg or similar surface to open the knife one handed. This feature along with the very thin titanium frame make this knife incredibly thin. Literally disappears in a pocket. And the anodized titanium pocket clip is also very low profile. Lockup is smooth, just a hint of lock stick on a firm opening but I'm sure that will go away with some use. Grind is flat more or less, with just a hint of a hollow grind going on. Brushed uniform finish and hologram laser etched blade logo give this thing a very clean appearance. Blade is centered and has zero play.
Asking sold F&F for this one sold G&S. Also shipped US insured.
I don't get notified of PM's/Conversations here yet with the new setup so please email. Eric@overmountain.us.com is my personal email but not my PayPal. I will send PayPal info to buyer only. I reserve the right to sell to whomever I choose, but first claim here or email timestamp will generally take it. Not looking for trades at this time. Reasonable offers will be responded to, low balls or offers I'm not interested in; don't be offended but I simply just won't respond. Available until I indicate sold here on this initial post. Will indicate in title too if I'm able. Sometimes doesn't want to cooperate...
Pics, Benchmade first:
Boker in next post...
Last edited:
