Trades in the Con US prefered, will take multiple knives or give them. Prefer highend production folders. Rare and disco'd knives, ti handled knives, Used knives are fine, can also accept partial trades with cash to even things out either way. Feel free to make any realistic offer, I'm open here and ask that you email offers.
Open to offers but here are a few off the top of my head. Spyderco Military and Manix sprints, Lum Tanto sprint and older ti models, native 4 & 5, ATR, leafstorms, Large Calypso, Ti and CF or any kind, anything rare or discontinued. Benchmade Ares models, AFCK's (shot show especially}, any monolock(630/635), limited osbornes, any m4 steel is of interest, 42's, 760, older dico'd models. Emerson satin pe knives. Most CRK knves. Maybe a zt 301 or 0551, kershaw tilt, sg2 junkyard dawg, wilkin's for large or small grips and leaftsorm, etc. Just ideas , feel free to make offers.
akorbiakATgmailDOTcom
Unless stated otherwise all knives have been in pocket a lil and most used for light (if any) edc tasks.
*83mm Citadel*
Carried once, fires hard. Auto's arnt my thing tho. Comes with everything in the photo.
*Benchmade 806BT-1101*
Pending trade****
Limited run of 400. This knife is lnib and only taken out to play with and snap pics of. Its smooth, centered, and just plain nice. I just happen to prefer liner lock AFCK's over the axis models. These limited edition AFCK models seem to double in value almost right away and make good users or investments. Knife comes with everything benchmade sent with it.
*800 AFCK*
Comes with original handles along with custom micarta scales and stainless backspacer. Real classy looking. The actions buttery smooth with solid lock up. The titanium liners have been jeweled and flamed. ATS-34 blade is scary sharp and comes with the original box.
Here's a quick 20 second video.
https://www.youtube.com/watch?v=fZ08bODKiNs&feature=youtube_gdata_player
*Ritter Cuscadi Grip GITD Backspacer*
Traded and shipped***
G10 Cuscadi Grips with glow in the dark backspacer. S30V coated large Ritter Griptilian wearing them. Includeds original scales. Benchmades signiture "pre-worn" clip coating shows up here but the knife is like new. Extra smooth, solid, centered, and just dandy in the hand. Comes with box shown in pic.
Short poorly lit vid:
https://www.youtube.com/watch?v=gETHKej2nbo&feature=youtube_gdata_player
*BM750bt w/ flamed ti* SOLD and shipped
I picked this Pinnacle up on the forums used with no box. I refurbed it and gave it a custom flame job. These Ti framelocks are long discontinued and this is the first one I've picked up. I'm not sure but it may be the first knife BM made with their Monolock (framelock), I can't think of any before it, but am often wrong. Solid, centered, and has smooth action. May have a hard time letting this one go.
BM 525/Bone Collector* TRADED to g.vantilburg.
Love this one. Its a small green/black g10 Benchmade Bone Collector with a 525 blade put it. The g10 was sanded down smooth for the wood grain look it now has. Its a perfect edc size and the cool backspacer really stands out with the ribcage looking pattern sanded off of the g10. Knife is like new aside from the frankenstein and scale work. Come with box shown.
*Barong Nick Rossi regrind*
Traded and shipped******
Carried for few days by me and used for edc stuff. I dyed the g10 a deep blue jean color then sold this to a forum friend of mine. He sent it off to Nick for a regrind and sharpened of the unsharpened portion of the blade. The knife hasn't been used since the regrind. The lock up is solid, blades centered, and its glassy smooth. Very good ergos and a damn cool knife. Comes in wrong Spyderco box.
Short 20sec video:
https://www.youtube.com/watch?v=WEd4_l_jpsk&feature=youtube_gdata_player
*Emerson CQC 7B SF*
Traded and shipped******
Just got this one in today. Not my cup, but I took it apart and played with it anyway. As with other Emerson's it was extremely dirty and unfinished looking inside. So I got the "breaking in" period out of the way with a sanding sponge and elbow lube. I blued the ti liner and slightly eased the aggressive texture on the g10 making the knife removable from the pocket. The knice lockss up early, is centered, and nice and smooth. Comes with box and baggie.
*Persistence with flattened spine*
Carried and used a little, took off some of the spine to get rid of the chubby look that Spyderco's value line has. Looks better this way, imho.
Trade pending********
*need diff pics of anything, just ask via email.
Thanks,
Adam
Open to offers but here are a few off the top of my head. Spyderco Military and Manix sprints, Lum Tanto sprint and older ti models, native 4 & 5, ATR, leafstorms, Large Calypso, Ti and CF or any kind, anything rare or discontinued. Benchmade Ares models, AFCK's (shot show especially}, any monolock(630/635), limited osbornes, any m4 steel is of interest, 42's, 760, older dico'd models. Emerson satin pe knives. Most CRK knves. Maybe a zt 301 or 0551, kershaw tilt, sg2 junkyard dawg, wilkin's for large or small grips and leaftsorm, etc. Just ideas , feel free to make offers.
akorbiakATgmailDOTcom
Unless stated otherwise all knives have been in pocket a lil and most used for light (if any) edc tasks.
*83mm Citadel*
Carried once, fires hard. Auto's arnt my thing tho. Comes with everything in the photo.
*Benchmade 806BT-1101*
Pending trade****
Limited run of 400. This knife is lnib and only taken out to play with and snap pics of. Its smooth, centered, and just plain nice. I just happen to prefer liner lock AFCK's over the axis models. These limited edition AFCK models seem to double in value almost right away and make good users or investments. Knife comes with everything benchmade sent with it.
*800 AFCK*
Comes with original handles along with custom micarta scales and stainless backspacer. Real classy looking. The actions buttery smooth with solid lock up. The titanium liners have been jeweled and flamed. ATS-34 blade is scary sharp and comes with the original box.
Here's a quick 20 second video.
https://www.youtube.com/watch?v=fZ08bODKiNs&feature=youtube_gdata_player
*Ritter Cuscadi Grip GITD Backspacer*
Traded and shipped***
G10 Cuscadi Grips with glow in the dark backspacer. S30V coated large Ritter Griptilian wearing them. Includeds original scales. Benchmades signiture "pre-worn" clip coating shows up here but the knife is like new. Extra smooth, solid, centered, and just dandy in the hand. Comes with box shown in pic.
Short poorly lit vid:
https://www.youtube.com/watch?v=gETHKej2nbo&feature=youtube_gdata_player
*BM750bt w/ flamed ti* SOLD and shipped
I picked this Pinnacle up on the forums used with no box. I refurbed it and gave it a custom flame job. These Ti framelocks are long discontinued and this is the first one I've picked up. I'm not sure but it may be the first knife BM made with their Monolock (framelock), I can't think of any before it, but am often wrong. Solid, centered, and has smooth action. May have a hard time letting this one go.
BM 525/Bone Collector* TRADED to g.vantilburg.
Love this one. Its a small green/black g10 Benchmade Bone Collector with a 525 blade put it. The g10 was sanded down smooth for the wood grain look it now has. Its a perfect edc size and the cool backspacer really stands out with the ribcage looking pattern sanded off of the g10. Knife is like new aside from the frankenstein and scale work. Come with box shown.
*Barong Nick Rossi regrind*
Traded and shipped******
Carried for few days by me and used for edc stuff. I dyed the g10 a deep blue jean color then sold this to a forum friend of mine. He sent it off to Nick for a regrind and sharpened of the unsharpened portion of the blade. The knife hasn't been used since the regrind. The lock up is solid, blades centered, and its glassy smooth. Very good ergos and a damn cool knife. Comes in wrong Spyderco box.
Short 20sec video:
https://www.youtube.com/watch?v=WEd4_l_jpsk&feature=youtube_gdata_player
*Emerson CQC 7B SF*
Traded and shipped******
Just got this one in today. Not my cup, but I took it apart and played with it anyway. As with other Emerson's it was extremely dirty and unfinished looking inside. So I got the "breaking in" period out of the way with a sanding sponge and elbow lube. I blued the ti liner and slightly eased the aggressive texture on the g10 making the knife removable from the pocket. The knice lockss up early, is centered, and nice and smooth. Comes with box and baggie.
*Persistence with flattened spine*
Carried and used a little, took off some of the spine to get rid of the chubby look that Spyderco's value line has. Looks better this way, imho.
Trade pending********
*need diff pics of anything, just ask via email.
Thanks,
Adam
Last edited:
