I have the following for sale.....
1. Benchmade "Delta Raider" Combat Knife
Specifications
Blade Steel : 420 HC or 440 C (HRC: 57-59)
Blade Length : 7 in.
OAL Length : 12 in.
This is an OLD discontinued Benchmade designed by David Steele (Who also designed the PCC 'Mamba' and the 'Timba') , This knife was produced somewhere around 1990. This knife has no box and comes with a handmade leather sheath.
Condition Note: Overall, I would rate this rare combat knife at approximately 90% condition. The Handle is in excellent shape and the blade has acquired some hairline scratches / scrapes, presumably from the blade contacting the sheath. This knife has also been sharpened.
Price: SOLD
2. Pacific Cutlery Corp. "Timba" Combat Knife
Specifications
Blade Steel : 420 HC or 440 C (HRC: 57-59)
Blade Length : 6 1/2 in.
OAL Length : 11 5/8 in.
This is a circa 1980's Pacific Cutlery Co. "Timba" Combat Fighting Knife designed by David Steele (Who also designed the PCC 'Mamba' and the Benchmade 'Delta Raider'). This knife has no box or sheath. This VERY rare knife features a Linen Micarta Handle.
Condition Note: Overall, I would rate this rare combat knife at approximately 90% condition. The Handle is in excellent shape and the blade has a few discoloration marks on the non presentation side of the knife, as seen in the pics. This knife might have been sharpened, it's somewhat hard to tell. If it has been sharpened after market whoever sharpened it did a good job.
Price: SOLD
3. LionSteel "Model # M7" Hunting Knife
Specifications
Blade Steel : German Sleipner (HRC: 60-61)
Blade Length : 7 in.
OAL Length : 12 3/8 in.
This is an excellently produced Italian Hunting knife. This knife comes with no box but does have the sheath with it.
Condition Note: This is 100% as NIB , without the box.
Price: $250.00
4. Blackjack Cutlery / H.G. Long and Co. "OSS / OSE Sleeve Daggers"
Specifications
'Blade' Steel : 440-A
'Blade' Length : 3 1/2 in.
OAL Length : 7 in.
Cast Integral
These are all original H.G. Long and Co. OSS / OSE Sleeve Daggers (produced by BlackJack Cutlery in it's Effingham IL plant). These were made just like the original WW II era sleeve daggers.
These units are unfinished. They were purchased when Blackjack Cutlery closed it's Effingham IL facility. I have attached scans of the 1994 Blackjack Cutlery Catalog in which these were featured in. These sold new for $119.95 (in 1994!).
Condition Note: These are all unfinished products and as such there will be slight variations on each dagger. All are in approximately the same condition as the ones you see in the pics. They ARE NOT 100% NIB as they never were (as of yet), a person could well clean them up and polish them out and make them in a much better condition.
Price: $65.00
35. A.G. Russell "Sting" Boot Knife
Specifications
Blade Steel : 440 C Stainless Steel
Blade Length : 3 1/4 in.
OAL Length : 6 5/8 in.
This is the ORIGINAL A.G. Russell "Sting" Made in Germany. This is an integral knife with a Black Micarta Handle. This piece would have been produced somewhere between 1977 - 1990 , unfortunately, I'm not sure the date of manufacture. This knife comes with a Reinforced Nylon Sheath.
Condition Note : This piece is in great shape considering it's age. The overall condition of the knife is at ~ 95 % . The Handle is in about 97% with a few light scuff marks on the face of the handle pins. The Blade is in approximately 95% exhibiting a couple light scratches / scuff marks on the mirror polish. The edge appears to be all original and unsharpened.
Price: $275.00
As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.
All prices are inclusive of S&H in the U.S., there will be a 4% charge for PayPal, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.
It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.
I reserve the right to refuse sales to anyone for any reason. If you have red rep, I won't sell to you, don't ask! You'd only be wasting your time and energy.
First Ill take it gets the cutlery.
My paypal address is : jj-guns (at) hot mail (dot) com
Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
1. Benchmade "Delta Raider" Combat Knife
Specifications
Blade Steel : 420 HC or 440 C (HRC: 57-59)
Blade Length : 7 in.
OAL Length : 12 in.
This is an OLD discontinued Benchmade designed by David Steele (Who also designed the PCC 'Mamba' and the 'Timba') , This knife was produced somewhere around 1990. This knife has no box and comes with a handmade leather sheath.
Condition Note: Overall, I would rate this rare combat knife at approximately 90% condition. The Handle is in excellent shape and the blade has acquired some hairline scratches / scrapes, presumably from the blade contacting the sheath. This knife has also been sharpened.
Price: SOLD
2. Pacific Cutlery Corp. "Timba" Combat Knife
Specifications
Blade Steel : 420 HC or 440 C (HRC: 57-59)
Blade Length : 6 1/2 in.
OAL Length : 11 5/8 in.
This is a circa 1980's Pacific Cutlery Co. "Timba" Combat Fighting Knife designed by David Steele (Who also designed the PCC 'Mamba' and the Benchmade 'Delta Raider'). This knife has no box or sheath. This VERY rare knife features a Linen Micarta Handle.
Condition Note: Overall, I would rate this rare combat knife at approximately 90% condition. The Handle is in excellent shape and the blade has a few discoloration marks on the non presentation side of the knife, as seen in the pics. This knife might have been sharpened, it's somewhat hard to tell. If it has been sharpened after market whoever sharpened it did a good job.
Price: SOLD
3. LionSteel "Model # M7" Hunting Knife
Specifications
Blade Steel : German Sleipner (HRC: 60-61)
Blade Length : 7 in.
OAL Length : 12 3/8 in.
This is an excellently produced Italian Hunting knife. This knife comes with no box but does have the sheath with it.
Condition Note: This is 100% as NIB , without the box.
Price: $250.00
4. Blackjack Cutlery / H.G. Long and Co. "OSS / OSE Sleeve Daggers"
Specifications
'Blade' Steel : 440-A
'Blade' Length : 3 1/2 in.
OAL Length : 7 in.
Cast Integral
These are all original H.G. Long and Co. OSS / OSE Sleeve Daggers (produced by BlackJack Cutlery in it's Effingham IL plant). These were made just like the original WW II era sleeve daggers.
These units are unfinished. They were purchased when Blackjack Cutlery closed it's Effingham IL facility. I have attached scans of the 1994 Blackjack Cutlery Catalog in which these were featured in. These sold new for $119.95 (in 1994!).
Condition Note: These are all unfinished products and as such there will be slight variations on each dagger. All are in approximately the same condition as the ones you see in the pics. They ARE NOT 100% NIB as they never were (as of yet), a person could well clean them up and polish them out and make them in a much better condition.
Price: $65.00
35. A.G. Russell "Sting" Boot Knife
Specifications
Blade Steel : 440 C Stainless Steel
Blade Length : 3 1/4 in.
OAL Length : 6 5/8 in.
This is the ORIGINAL A.G. Russell "Sting" Made in Germany. This is an integral knife with a Black Micarta Handle. This piece would have been produced somewhere between 1977 - 1990 , unfortunately, I'm not sure the date of manufacture. This knife comes with a Reinforced Nylon Sheath.
Condition Note : This piece is in great shape considering it's age. The overall condition of the knife is at ~ 95 % . The Handle is in about 97% with a few light scuff marks on the face of the handle pins. The Blade is in approximately 95% exhibiting a couple light scratches / scuff marks on the mirror polish. The edge appears to be all original and unsharpened.
Price: $275.00
As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.
All prices are inclusive of S&H in the U.S., there will be a 4% charge for PayPal, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.
It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.
I reserve the right to refuse sales to anyone for any reason. If you have red rep, I won't sell to you, don't ask! You'd only be wasting your time and energy.
First Ill take it gets the cutlery.
My paypal address is : jj-guns (at) hot mail (dot) com
Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
Last edited: