BM, Extreme Ratio, ZT, Brous, Al Mar, Pacific, Blackjack, Protech, Spyderco, etc.

J

Jimdo

Feedback: +39 / =0 / -0
Joined
May 26, 2005
Messages
915
Unless otherwise noted; all knives are in 100% condition, as received from the maker.

3. Extreme Ratio ‘EFA Pilot’

Specifications
Blade Steel : Bohler N690 Stainless Cobalt Steel (58HRC)
Blade Length : 4 1/2 in.
Closed Length: 5 7/8 in.
OAL Length Opened : 10 3/8 in.
Anticordal Aluminum Handles w/ integrated seat belt cutter
This knife features a locking mechanism to lock the liner into opened position thereby making the potentiality of accidentally closing the knife nearly impossible.
3/16 in. thick spine
The EFA PILOT knife is an emergency and survival tool requested by the Aeronautica Militare Italiana (Air Force) to equip the Italian pilots of the new Euro Fighter jets.
Condition Note: New in Box.
Price: $350.00




4. Brous Blades ‘Division Flipper’

Specifications
Blade Steel : D2 Tool Steel (59 – 61 RC)
Blade Length : 4 3/8 in.
Closed Length: 5 7/8 in.
OAL Length Opened : 9 7/8 in.
3D contoured Carbon Fiber Handles
This flipper features a ball bearing pivot system for an incredibly smooth opening and closing
1/4 in. thick spine
Condition Note: New in Box. As received from Brous, however, there is a small problem with this knife. The blade touches the middle pin upon closing, as such there is a ‘divot’ in the edge of the knife, as seen in the pictures…
Price: $325.00





18. Pacific Cutlery International Series

Specifications
Blade Steel : 420 C Stainless
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Zamak Channel Constructed Handles
Locks Closed, doesn’t Lock in Open Position.
Condition Note : This knife is at approx. 75 % condition. It has some chipping on the handles and some scratches on the blade, as shown in the pics.
Price: $125.00








19. Benchmade Model 239S BK

Specifications
Blade Steel : 12C27 Sandvik Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Zamak Channel Constructed Handles
Excellent Lock up in Open and Closed Positions.
Condition Note : This knife is at approx. 80% condition. It had been sharpened; it has several scratches on the blade and a few chips in the coating on the handles.
Price: $125.00









20. Benchmade Model 42 AS First Production Run

Specifications
Blade Steel : 12C27 Sandvik Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Titanium Channel Constructed Handles
Good Lock up in both Open and Closed Positions. This knife is a rare ‘First Production Run’ knife, #184 / 500. Unfortunately there is no box or papers with the knife.
Condition Note : This knife is in approximately 90% condition with a few light scratches and scuffs here and there on both the blade and the handles. The tang pins are also slightly disfigured, as seen in the pics.
Price: $450.00











25. Zero Tolerance 0770 CF

Specifications
Blade Steel : Stonewashed Elmax Stainless Steel
Blade Length : 3 1/4 in.
OAL Length Opened: 7 1/2 in.
OAL Length Closed : 4 1/4 in.
Carbon Fiber Handle w/ Inset Liner Lock.
Comes with Original Box and Paper Work.
Condition Note : 100 % NIB.
Price: TRADED




29. Benchmade Model 42 T-Latch

Specifications
Blade Steel : 12c27 Sandvick Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Channel Constructed Titanium Handles
This is the earlier Model 42 with the T-Latch. These are getting harder and harder to come by as time passes. Many argue that the T-Latch knives are better / more comfortable flippers than the spring latch knives due to the less aggressively milled handles.
Condition Note : The blade on this knife is 99% + , I can’t find a flaw on it. It’s the original / unsharpened edge as well. The handles are approximately 97%. There are some minute scuffs on the handles and a small amount of latch wear.
Price: $450.00 (SPF)




31. Benchmade Model 42 S.S. Limited Edition

Specifications
Blade Steel : D2 Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Channel Constructed Stainless Steel Handles
This is a rare BM 42 SS, which features Zin Pins, D2 Steel Blade, Stainless Steel Handles and is a limited edition. This knife is #023 / 500 pieces worldwide. This piece includes the original box, paperwork and sheath.
Condition Note : The blade on this knife is 99% + , I can’t find a flaw on it. It’s the original / unsharpened edge as well. The handles are approximately 98%. There are some VERY minute rub marks on the handles, foremost of which is near the latch area and there is a small scuff mark near the pivot area on one of the handles (as shown in the pics).
Price: SOLD






32. Benchmade Model 40 TR

Specifications
Blade Steel : 440C Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Channel Constructed Titanium Handles
This is a rare Benchmade Model 40 TR, there weren’t a lot of these trainer balisongs made and as such, they’re pretty hard to come by. I picked this one up at Blade 2014.
Condition Note : This knife is around 95% of its original condition. There are very faint scuffs on the ‘blade’. It has the standard light chipping / flaking on the red coating where the latch comes into contact with the handles.
Price: $450.00





 
Last edited:
38. PCC ‘International Series’ Tanto

Specifications
Blade Steel : 420C Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Zamack Channel Constructed Handles
Good Lock up in opened and closed position.
Condition Note : The blade on this one is in about 90% condition. The handles are in about 95% condition. There are some scratches here and there and the blade has been resharpened, whoever resharpened it did a good job though. It’s sharp as a razor and appears to have been done in a professional manner.
Price: $150.00




39. Benchmade Model 239

Specifications
Blade Steel : 12c27 Sandvick Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Zamack Channel Constructed Handles
Good Lock up in opened and closed position.
Condition Note : This knife is in approximately 95% of it’s original condition. It’s the original edge and the handles and blade have a few light scuffs and scratches here and there.
Price: $175.00 (SPF)





40. Protech / Walter Brend Designed ‘Model 3’ Automatic Knife, Pre-Production Prototype

Specifications
Blade Steel : 154-CM Stainless Steel (RC 59)
Blade Length : 3 3/4 in.
OAL Length Opened : 8 3/4 in.
OAL Closed : 5 in.
6061 T6 Anodized Aircraft Grade Aluminum Handle
This automatic knife is designed by Walter Brend and is a ‘Pre Production Prototype’ #043. This knife also features a Gold Lip Mother of Pearl Inlaid Button and has the original box and paperwork.
Condition Note : Approximately 99%. There are incredibly faint rub marks that are only visible under the right light. They appear to be from someone wiping down the blade with a cloth. This blade has a VERY high polish mirror finish and is quite difficult to photograph. I attempted to show these light scrapes in the pics.
Price : $350.00 (SPF)






41. Al Mar Eagle Automatic Knife, Model ‘EBK-M2’

Specifications
Blade Steel : 154-CM Stainless Steel
Blade Length : 4 in.
OAL Length Opened : 8 3/4 in.
OAL Closed : 4 3/4 in.
6061 T6 Anodized Aircraft Grade Aluminum Handle
These automatic Al Mar Eagles are pretty hard to come by, as they are quite rare. They feature a textured handle for improved grip and a pocket clip. This example has the original box and paperwork.
Condition Note : Approximately 98%. There are a few light rub marks on the handle. The blade appears to be as new.
Price : $325.00




42. Spyderco ‘Rainbowfly’

Specifications
Blade Steel : 440C Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 3/4 in.
OAL Length Closed : 5 3/4 in.
Cast Stainless Steel Handles
This Rainbowfly comes with the original box and paperwork.
Condition Note : 100% NIB.
Price: Traded




43. Spyderco ‘Smallfly’

Specifications
Blade Steel : 154-CM Stainless Steel
Blade Length : 3 in.
OAL Length Opened: 7 1/4 in.
OAL Length Closed : 4 1/4 in.
Black G10 over Stainless Steel Lined Handles
This Smallfly comes with the original box.
Condition Note : 100% NIB.
Price: $200.00 (SPF)




44. Benchmade Model 45S

Specifications
Blade Steel : 12c27 Sandvick Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Channel Constructed Stainless Steel Handles
This 45S comes with the original sheath. Solid lock up in both open and closed positions.
Condition Note : The Blade on this knife is in approximately 98% w/ the factory edge. The Handles, on the other hand, show some substantial signs of carry. I would rate them at 85%. There are no deep scratches but a lot of smaller / lighter scuffs and scratches which is indicative of pocket carry. A Spa trip would clean this knife up considerably.
Price: $350.00




46. Benchmade Model 45

Specifications
Blade Steel : 12c27 Sandvick Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Channel Constructed Stainless Steel Handles
This 45 comes with the original sheath. Solid lock up in both opened and closed positions.
Condition Note : The Blade on this knife is in approximately 99% condition but it has been resharpened. The Handles are in around 95% of original condition. Oddly, the latch is discolored, as seen in the pics.
Price: $400.00






As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.

All prices are inclusive of S&H in the U.S., there will be a 4% charge on PP, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.

It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.

I reserve the right to refuse sales to anyone for any reason.

First “I’ll take it” gets the cutlery.

My paypal address is : jj-guns (at) hot mail (dot) com

The only trades I would consider at this time would involve custom Balisongs.

Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
 
Last edited:
SmallFly is SPF, how would you like to proceed with payment ?
Please send an email to : jj-guns (at) hot mail (dot) com
 
knateknife, you have 24 hours to get in touch with me in regards to payment for the knife. If you do not, it goes to someone else.
 
About the Smallfly.... There are currently three people in line for it.
1st : knateknife
2nd : An " I'll take it " via email.
3rd : flubber952

knateknife has got till 10:30 am tomorrow morning to touch base with me, if he does not, 'dibs' go to the email order. I am almost positive that the email order will take the knife should he get the opportunity to do so, as he is the same person that has all ready bought and paid for the BM 42 SS. If he doesn't take the knife, it's all yours flubber952.
 
Thanks for the BM 239. My youth revisited. This exact BM was confiscated from me in high school, by the principal (bet he kept it). It'll be like connecting to an "old" friend once again. Can't wait for the knife to arrive.

Thank you, and it was a pleasure to do business with you. Will surely do so again, if the opportunity arises.
 
You must log in or register to reply here.
Back
Top