[SOLD
This knife is designed for someone with larger hands although I consider my hands to be average size and the knife feels great in hand. Blade is centered, lock up is early and tight with no movement in any direction. It flips hard and fast riding on caged bearings, no wrist required. Here are the specs:
Closed- 4 1/2 inches
Open- 7 5/8 inches
Blade- 3 1/8 inches
Steel- 5/32 cpm154
HT- In house with cryo to a tested 59-60rc
Grind- Flat ground with drawn clip and jimping on the spine
Liners- .100 Titanium anodized blue
Bolsters- M3 Composite Mokume Gane
Scales- Exhibition grade stabilized Maple Burl
Pivot- 3/16 Stainless with caged bearings
Clip- Stainless deep ride clip set up for tip up right hand carry
Hardware- Stainless with black g-10 back spacer
Asking 435.00 shipped in the USA
Paypal, USPS M/O, or Certified check preferred.
Questions or comments welcomed
Thanks for looking.
Video link, just click on the picture
SOLD
Next up for sale is a Ti frame lock. This knife is the first knife I made using caged bearings . It fires every time with little effort and locks up with an intimidating click. Lock up is not early on this knife but it is 100% solid with zero movement in any direction. As with all my knives the lock bar was heat treated and it unlocks easily with no lock stick. Here are the specs:
Closed- 4 1/2 inches
Open- 7 3/4 inches
Blade- 3 1/4 inches
Steel- cpm154 x 5/32
HT- In house with cryo to 60-61 rc
Grind- flat ground with drawn clip and jimping on spine
Finish- Bead blasted and stone washed
Frame- .140 Titanium with machine work and anodized
Pivot- 3/16 stainless with caged bearings
Clip- machined anodized titanium set up for RH tip up carry
Hardware- Stainless
Asking 335.00 shipped in the USA
PayPal, USPS M/O, or Certified Check preferred
Questions or comments welcomed
Thanks for looking
Video link, just click on the picture
This knife is designed for someone with larger hands although I consider my hands to be average size and the knife feels great in hand. Blade is centered, lock up is early and tight with no movement in any direction. It flips hard and fast riding on caged bearings, no wrist required. Here are the specs:
Closed- 4 1/2 inches
Open- 7 5/8 inches
Blade- 3 1/8 inches
Steel- 5/32 cpm154
HT- In house with cryo to a tested 59-60rc
Grind- Flat ground with drawn clip and jimping on the spine
Liners- .100 Titanium anodized blue
Bolsters- M3 Composite Mokume Gane
Scales- Exhibition grade stabilized Maple Burl
Pivot- 3/16 Stainless with caged bearings
Clip- Stainless deep ride clip set up for tip up right hand carry
Hardware- Stainless with black g-10 back spacer
Asking 435.00 shipped in the USA
Paypal, USPS M/O, or Certified check preferred.
Questions or comments welcomed
Thanks for looking.
Video link, just click on the picture
SOLD
Next up for sale is a Ti frame lock. This knife is the first knife I made using caged bearings . It fires every time with little effort and locks up with an intimidating click. Lock up is not early on this knife but it is 100% solid with zero movement in any direction. As with all my knives the lock bar was heat treated and it unlocks easily with no lock stick. Here are the specs:
Closed- 4 1/2 inches
Open- 7 3/4 inches
Blade- 3 1/4 inches
Steel- cpm154 x 5/32
HT- In house with cryo to 60-61 rc
Grind- flat ground with drawn clip and jimping on spine
Finish- Bead blasted and stone washed
Frame- .140 Titanium with machine work and anodized
Pivot- 3/16 stainless with caged bearings
Clip- machined anodized titanium set up for RH tip up carry
Hardware- Stainless
Asking 335.00 shipped in the USA
PayPal, USPS M/O, or Certified Check preferred
Questions or comments welcomed
Thanks for looking
Video link, just click on the picture
Last edited:
I'm sure it operates as good as it looks. Lol
