<Both SOLD> Benchmade Mini Adamas, Spyderco Manix 2 G10 All Black

kevcand

kevcand

Gold Member
Feedback: +51 / =0 / -0
Joined
Jun 10, 2021
Messages
120
Hi BF,

Hope you all had a Happy New Year! Prices include shipping (US only please). First “I’ll take it” here followed by a PM gets it; for members that can't PM please leave your email address along with the "I'll take it". PPFF no notes. Both come with boxes/paperwork and microfiber pouch for the Benchmade. Please PM me with questions or if you want more pics. Full details below:

1. Benchmade Mini Adamas : Gray Cerakote Cruwear blade, black G10 scales. Original owner, carried only 2 times. Clip switched to LH carry. The factory edge was butter knife sharp so I sharpened it to 800grit and ceramic polish following the factory edge edge bevels. I'm no expert but it turned out pretty nice, very sharp. Perfect centering and no side to side play but I do feel a little up down play, otherwise action is smooth/excellent. I contacted BM about the play, it was a known issue on this model and they are happy to fix it if you so desire. Yours for $OLD

2. Spyderco Manix 2: Black DLC S30 blade, black G10 scales. Original owner, carried only 3 times and it still looks excellent/LNIB to me. I just carry my LW Manix in favor of this one so it needs a new home. Scary sharp factory edge. Clip switched to LH carry. Perfect centering, lockup, and smooth action (not drop shut if that's your thing). This is an excellent example. Yours for $OLD
 

Attachments

  • IMG_0719.jpeg
    IMG_0719.jpeg
    1,014.8 KB · Views: 4
  • IMG_0720.jpeg
    IMG_0720.jpeg
    959.7 KB · Views: 4
  • IMG_0721.jpeg
    IMG_0721.jpeg
    557.9 KB · Views: 4
  • IMG_0722.jpeg
    IMG_0722.jpeg
    999.9 KB · Views: 4
  • IMG_0723.jpeg
    IMG_0723.jpeg
    978.9 KB · Views: 3
  • IMG_0724.jpeg
    IMG_0724.jpeg
    515.8 KB · Views: 4
Last edited:
Manix is sold. Price drop on the Adamas in hopes for one trip to the post office tomorrow 🙏
 
KnifeGye said:
Will the blade play on the adamas go away if you tighten the pivot ?
Click to expand...
No unfortunately. Per Benchmade's comment to me, it will require a new blade which is fully covered by warranty. That tells me there were some tolerance issues in the blade tang area where the cross bar touches down. The play is very minimal but I'm also very picky.
 
NowhereFast said:
A little more persuasion and I could be your huckleberry on that adamas …
Click to expand...
Haha, how about this for persuasion: buy it and just use it :). The edge I put on it is better than anything from BM and aside from what I've disclosed it's otherwise LNIB. I've already got it priced very low to offset the QC issues.
 
I'll take the Adamas. Been looking for a good solid EDC user that will not hurt my feelings too much if I lose it or if it gets broken.

Can't PM, so if you will email me with PP information I'll get back with you soon as I can.

rc 5 zero one 7 at yahoo

Thanks.
 
RCFL said:
I'll take the Adamas. Been looking for a good solid EDC user that will not hurt my feelings too much if I lose it or if it gets broken.

Can't PM, so if you will email me with PP information I'll get back with you soon as I can.

rc 5 zero one 7 at yahoo

Thanks.
Click to expand...
sorry the Adamas just sold to Bear4142 Bear4142 minutes before your response.
 
Hey man, email or message me, I’m interested in the mini manix you’ve posted and withdrawn a couple times. I’ll take it!!
Harrison
 
Last edited:
You must log in or register to reply here.
Back
Top