- Joined
- Jan 18, 2017
- Messages
- 1,841
Looking for sales only, please!
Price as listed is the cost to your door (TYD). These are cross-listed and time stamps will be used to determine buyer order.
Terms and conditions: Please post an "I'll take it" message to the thread, followed with a Private Message. If you don't have PM privileges, please post your e-mail address in the thread (and delete your e-mail after I respond.) Please don't post an "I'll take it" unless you unequivocally agree to the terms of sale noted in this post. Prices listed are the cost to your door via USPS Priority or UPS Ground. I will pay for signature delivery at your request. Extra insurance also available if you will cover the charges. PayPal accepted for payment. I RESERVE THE RIGHT TO DENY SALE FOR ANY REASON.
Contiguous 48 US states buyers preferred, Alaska, Hawaii, and International buyers considered. If you live outside of the lower 48 US states and would like to purchase, please contact me directly before posting an "I'll take it."
All sales are final! Photos are current and reflect condition of all items, but please ask any questions you may have before buying.
1.) Busse Hell Razor 2008 SE. Can't believe I'm offering this beauty with the old school CBT! It's made from INFI steel w/black canvas micarta scales. 0.18" thickness, and while I can't find my other measuring tools at the moment, Google suggests that it has a 6 7/8" blade and is 12 5/8" OAL. This has been used lightly, but was since sharpened and reprofiled by Josh at Razor edge, so the blade is SCREAMING sharp! The logo and "2008 Special Edition" etching was rubbed off (I like it a lot more without them anyway) but you can still see a bit of ghost etching on there. Otherwise, it basically looks sterile. The INFI has some tarnishing, as you can obviously see in the pics, which again makes it look even cooler, imho. Sorry, no sheath, other than a cardboard one that it'll ship with.
$550 Firm TYD SOLD
2.) Busse Hell Razor 2. This one is also Busse "Competition Finish" INFI steel, but comes w/red and black G10 scales. From everything I can see, it's in factory-new condition (I bought it as such and I have not used it). If you check out the Busse website, you'll see that this would be $497 + shipping for the comp. finish and multi-colored G10, but I am offering it for less (my shipping price is included) and including a custom leather sheath from Azula Gun Holsters ($49.95 value). According to the release thread, specs for the HR2 are:
Over All Length: Approx. 13 3/4"
Blade Length: Approx. 8"
Thickness: Approx. .210"
Steel: INFI
Finish: Competition Finish or Coated
Bevel: Corrugated Bevel Tech (CBT)
Hardness: 58-60 Rc
$500 $450 Firm TYD SOLD
Thanks for looking!
Price as listed is the cost to your door (TYD). These are cross-listed and time stamps will be used to determine buyer order.
Terms and conditions: Please post an "I'll take it" message to the thread, followed with a Private Message. If you don't have PM privileges, please post your e-mail address in the thread (and delete your e-mail after I respond.) Please don't post an "I'll take it" unless you unequivocally agree to the terms of sale noted in this post. Prices listed are the cost to your door via USPS Priority or UPS Ground. I will pay for signature delivery at your request. Extra insurance also available if you will cover the charges. PayPal accepted for payment. I RESERVE THE RIGHT TO DENY SALE FOR ANY REASON.
Contiguous 48 US states buyers preferred, Alaska, Hawaii, and International buyers considered. If you live outside of the lower 48 US states and would like to purchase, please contact me directly before posting an "I'll take it."
All sales are final! Photos are current and reflect condition of all items, but please ask any questions you may have before buying.
1.) Busse Hell Razor 2008 SE. Can't believe I'm offering this beauty with the old school CBT! It's made from INFI steel w/black canvas micarta scales. 0.18" thickness, and while I can't find my other measuring tools at the moment, Google suggests that it has a 6 7/8" blade and is 12 5/8" OAL. This has been used lightly, but was since sharpened and reprofiled by Josh at Razor edge, so the blade is SCREAMING sharp! The logo and "2008 Special Edition" etching was rubbed off (I like it a lot more without them anyway) but you can still see a bit of ghost etching on there. Otherwise, it basically looks sterile. The INFI has some tarnishing, as you can obviously see in the pics, which again makes it look even cooler, imho. Sorry, no sheath, other than a cardboard one that it'll ship with.
2.) Busse Hell Razor 2. This one is also Busse "Competition Finish" INFI steel, but comes w/red and black G10 scales. From everything I can see, it's in factory-new condition (I bought it as such and I have not used it). If you check out the Busse website, you'll see that this would be $497 + shipping for the comp. finish and multi-colored G10, but I am offering it for less (my shipping price is included) and including a custom leather sheath from Azula Gun Holsters ($49.95 value). According to the release thread, specs for the HR2 are:
Over All Length: Approx. 13 3/4"
Blade Length: Approx. 8"
Thickness: Approx. .210"
Steel: INFI
Finish: Competition Finish or Coated
Bevel: Corrugated Bevel Tech (CBT)
Hardness: 58-60 Rc
Thanks for looking!
Last edited:
