KornalskiKnives
Knifemaker / Craftsman / Service Provider
- Joined
- Sep 12, 2014
- Messages
- 1,088
Hello, new knives for purchase made during this week.
You can see work in progress on Instagram - https://www.instagram.com/kornalskiknives/
You can watch some of my movies (speaking Polish but one picture is worth more than 100 words) - https://www.youtube.com/user/KornalskiKnives
My fanpage - https://www.facebook.com/HandmadeBushcraftKnives/
My WWW - (in flash) - http://www.kornalski.com.pl
Thank You for watching
Adam Kornalski
-----------------------------------------------------------------------------------------------------------------------
KNIVES:
I. ELMAX 4,5 mm Bowie170 in Green Canvas Micarta with red liners - KNIFE WILL HAVE ABS 2 mm Black sheath
HT by myself for 60 HRC
Handles Green Canvas Micarta sandblasted with 1 mm red liners, stainless steel screws sandblasted. Stonewash finish.
Overall 294 mm (11 1/2"), width 37 mm(1 3/8"), cutting edge 170 mm (6 5/8")
Weight 232 g.
Price: 225 $ with shipping to USA (priority letter) - PayPal
SHEATH LIKE THIS BELOW
--------------------------------------------------------------------------------------------------------------------------------------------------------
II. A8Mod ODC160 7 mm in G10 Black and ABS 2 mm black sheath
HT by myself for 58 HRC
Handles G0 sandblasted, stainless steel screws sandblasted
Stonewash light finish.
Overall 290 mm, width 36 mm, cutting edge 160 mm (6 1/4")
Weight 351 g.
Price: 225 $ with shipping to USA priority letter with tracking - PayPal
-------------------------------------------------------------------------------------------------------------------------
III. A2 ODC240 6 mm in Green Canvas Micarta
HT by myself for 59 HRC
Handles Green Canvas Micarta red 1 mm Hipps liners, stainless steel screws sandblasted
Stonewash finish.
Overall 375 mm, width 36 mm, cutting edge 240 mm (9 1/2")
Weight 387 g.
Price: 225 shipping to USA priority letter with tracking - PayPal - WILL HAVE NICE BLACK LEATHER SHEATH included in price
--------------------------------------------------------------------------------------------------------------------
IV. Vanadis10 ODC120 4,5 mm in Black G10 with leather custom sheath
HT by myself for maximum wear resistance 63 HRC
Handles black G10 , stainless steel screws sandblasted.
Stonewash finish.
Overall 258 mm, width 36 mm, cutting edge 125 mm - yes it is 5"
Weight 251 g.
Price: 200 $ with shipping to USA priority letter with tracking
-----------------------------------------------------------------------------------------------------------------------------------------------
V - VI - 2x Hunter: 2x N690 3,5 mm in CNC textured G10 Red and Orange
HT by myself for maximum corrosion resistance - 60 HRC
Handles orange and red G10 CNC soft surface sandblasted, stainless steel screws sandblasted. Stonewash finish.
Overall 240 mm (9 1/2"), width 37 mm(1 3/8"), cutting edge 120 mm (4 3/4")
Weight 150 g orange, 162 g red.
Price: SOLD
You can see work in progress on Instagram - https://www.instagram.com/kornalskiknives/
You can watch some of my movies (speaking Polish but one picture is worth more than 100 words) - https://www.youtube.com/user/KornalskiKnives
My fanpage - https://www.facebook.com/HandmadeBushcraftKnives/
My WWW - (in flash) - http://www.kornalski.com.pl
Thank You for watching
Adam Kornalski
-----------------------------------------------------------------------------------------------------------------------
KNIVES:
I. ELMAX 4,5 mm Bowie170 in Green Canvas Micarta with red liners - KNIFE WILL HAVE ABS 2 mm Black sheath
HT by myself for 60 HRC
Handles Green Canvas Micarta sandblasted with 1 mm red liners, stainless steel screws sandblasted. Stonewash finish.
Overall 294 mm (11 1/2"), width 37 mm(1 3/8"), cutting edge 170 mm (6 5/8")
Weight 232 g.
Price: 225 $ with shipping to USA (priority letter) - PayPal
SHEATH LIKE THIS BELOW
--------------------------------------------------------------------------------------------------------------------------------------------------------
II. A8Mod ODC160 7 mm in G10 Black and ABS 2 mm black sheath
HT by myself for 58 HRC
Handles G0 sandblasted, stainless steel screws sandblasted
Stonewash light finish.
Overall 290 mm, width 36 mm, cutting edge 160 mm (6 1/4")
Weight 351 g.
Price: 225 $ with shipping to USA priority letter with tracking - PayPal
-------------------------------------------------------------------------------------------------------------------------
III. A2 ODC240 6 mm in Green Canvas Micarta
HT by myself for 59 HRC
Handles Green Canvas Micarta red 1 mm Hipps liners, stainless steel screws sandblasted
Stonewash finish.
Overall 375 mm, width 36 mm, cutting edge 240 mm (9 1/2")
Weight 387 g.
Price: 225 shipping to USA priority letter with tracking - PayPal - WILL HAVE NICE BLACK LEATHER SHEATH included in price
--------------------------------------------------------------------------------------------------------------------
IV. Vanadis10 ODC120 4,5 mm in Black G10 with leather custom sheath
HT by myself for maximum wear resistance 63 HRC
Handles black G10 , stainless steel screws sandblasted.
Stonewash finish.
Overall 258 mm, width 36 mm, cutting edge 125 mm - yes it is 5"
Weight 251 g.
Price: 200 $ with shipping to USA priority letter with tracking
-----------------------------------------------------------------------------------------------------------------------------------------------
V - VI - 2x Hunter: 2x N690 3,5 mm in CNC textured G10 Red and Orange
HT by myself for maximum corrosion resistance - 60 HRC
Handles orange and red G10 CNC soft surface sandblasted, stainless steel screws sandblasted. Stonewash finish.
Overall 240 mm (9 1/2"), width 37 mm(1 3/8"), cutting edge 120 mm (4 3/4")
Weight 150 g orange, 162 g red.
Price: SOLD
Last edited:
