ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,458
I'm trying to switch up the collection so here are some knives I'm putting up for trade. I'll be here to answer any questions you might have. If you need more details/specs/pictures, just shoot me a message and I'll have them sent over. If you're interested, feel free to start a conversation or email me at kenleung1995 at hotmail dot com. I try to check my threads fairly often so chances are I'll see your posts as well. If you just want a straightforward sale, let me know and we can have something worked out. Thanks for taking a look.
For trades, I'm looking for: Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Rogovets, Jason Clarks, Rassentis, some Shirogorovs, Grimsmos, Brown Knives Servo, Jason Guthries, MSC Non-Locking PT, Marfione MSG, DOC, ZT 0454, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Brad Zinker 4.5" Urban Trapper - like new - Sold
Featherweight 4.5" bladed flipper that weights only 1.5 oz.
The lightest, slimmest, and thinnest knife I've owned
Blackwashed CPM-154 blade with a full hollow grind and crowned spine
Tumbled blue anodized ti frame with a hole pattern on both sides
Deep carry clip
Locks up tight with a normal flip
Smooth action with a detent that makes it hard to misfire
2. Freeman Knives Da Dozer -near mint
Very well put together 3.5" sheepsfoot
Alabama damascus blade with a dark etch and a detent ramp
Blasted ti handle slabs with a carbon fiber backspacer
Damascus clip that's been etched and then distressed to better hide wear
Blue frame hardware, blue 2-tone pivot, and blue satin pivot collars
Locks up rock solid with no play
I can't show the centering on camera since the backspacer comes around to cover the end but it's dead center as far as I can tell
Smooth action, flips reliably, and almost drops shut on it's own
Fits my hand like a glove
3. Ferrum Forge/Gavko 2017 Spinner Flipper - near mint
"Atlantian Plates" milling pattern
3.5" working finish CPM-20CV blade
Tumbled gray-blue ti frame that has some hints of green on the edges
Blue-green anodized hardware and standoffs
With the way the flipper is angled, this is probably the best Ferrum Forge flipper I've had
Flips well and can be Spydie-flicked regardless of how the rolling detent is set
Smooth action, locks securely, and the centering is dead on
For trades, I'm looking for: Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Rogovets, Jason Clarks, Rassentis, some Shirogorovs, Grimsmos, Brown Knives Servo, Jason Guthries, MSC Non-Locking PT, Marfione MSG, DOC, ZT 0454, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Brad Zinker 4.5" Urban Trapper - like new - Sold
Featherweight 4.5" bladed flipper that weights only 1.5 oz.
The lightest, slimmest, and thinnest knife I've owned
Blackwashed CPM-154 blade with a full hollow grind and crowned spine
Tumbled blue anodized ti frame with a hole pattern on both sides
Deep carry clip
Locks up tight with a normal flip
Smooth action with a detent that makes it hard to misfire
2. Freeman Knives Da Dozer -near mint
Very well put together 3.5" sheepsfoot
Alabama damascus blade with a dark etch and a detent ramp
Blasted ti handle slabs with a carbon fiber backspacer
Damascus clip that's been etched and then distressed to better hide wear
Blue frame hardware, blue 2-tone pivot, and blue satin pivot collars
Locks up rock solid with no play
I can't show the centering on camera since the backspacer comes around to cover the end but it's dead center as far as I can tell
Smooth action, flips reliably, and almost drops shut on it's own
Fits my hand like a glove
3. Ferrum Forge/Gavko 2017 Spinner Flipper - near mint
"Atlantian Plates" milling pattern
3.5" working finish CPM-20CV blade
Tumbled gray-blue ti frame that has some hints of green on the edges
Blue-green anodized hardware and standoffs
With the way the flipper is angled, this is probably the best Ferrum Forge flipper I've had
Flips well and can be Spydie-flicked regardless of how the rolling detent is set
Smooth action, locks securely, and the centering is dead on
Last edited:
