Bravo 2 / Dwyer / MMHW - ALL SOLD

[luethge]

Hi Blade Forums,

A few For SALE today, no tades please (Unless its towards a Gossman).

Im going to list prices for F/F and G/S

Please consider these used. You will find scratches, patina, evidence of possible sharpening, stropping, handling marks. These are all excellent condition potential users.

I might have to space this out in a few posts.

CONUS shipping preferred ( Canadian Friends please PM )
No sales to minors
Please understand & respect local / state laws.
Pm questions to keep thread clean.



First 3 top down from last pic.

SOLD Tops Tex Creek XL 1095 steel. I’m at least the second owner. Knife has seen light use, sharpened once. There is a tiny microchip in the edge towards the tip on belly. Will come with factory leather sheath - poor fit, and custom 7Rattles bushcraft Kydex - perfect fit. Scales are micarta, stock is around .19, blade is around 6 inches. Great lightweight camp knife. If you have huge hands you might want to skip this one.

Asking $109 F/F or $129 G/S

SOLD Bark River Bravo 2 3V steel. I’m second owner. First owner never used. I’ve cut cardboard, carved 2 sticks. This knife handles extremely well for big knife - same dimensions as a USMC KaBar. 7 inch blade, .25 stock, saber convex - Razor sharp. This one has black sure touch scales, incredible grip / comfort. No thumb ramp on this one. Complete with typical Bark River uneven grinds - does not affect performance. Sheath was treated with obenaufs, shows marks from storage. Excellent one tool option. Perfect camp knife. Comes with box.

Asking $280 F/F or $320 G/S

SOLD Void Tactical Wendigo 80CRV2 Steel. I’m first owner. Light use on cardboard. Stout little knife. 4.5 blade, .20 stock, black micarta, tan kydex with perfect fit. This one is saber / convex - cuts well for a prybar. Comes with Box / sticker - lifetime warranty from a new USA maker. Might want to skip this one if you have huge hands.

Asking $175 F/F or $200 G/S

I’ll continue post below ..

 

[luethge]

Strider MSS in PD1 steel. I’m second owner. I’m the only person to use this one. This model is rare in S30V or 154CM , but it’s really rare in Micromelt PD1 ( pre curser to Cruwear, 3V) - tough steel with excellent edge retention. I searched for one of these about 5 years. This is in my opinion the most usable strider made. The grind is similar to a Randall 25, but hallow on the flats and tapers into flat at the tip - maintains prying strength. The blade is roughly 5.25 long, .19 stock, G10 scales ( sharp edges on the scales ). Will come in a Spec Ops Combat Master sheath. This is a Bad Ass knife. Might be pulled if there is no interest.

SOLD Asking $450 F/F or $490 G/S - Firm

SOLD Dwane Dwyer RM in PD1 steel. I’m first owner. I paid a stupidly high price for this one. Selling for less that 1/2 what I paid - price is firm. Medium use the past couple years. I’ve carried it dog walking, I’ve cut a lot of cardboard, I've sharpened and stropped it. This knife is a chisel grind, blade is 4.25 long, 5/32 stock - Sharp toothy edge. The tip is micro blunted, will be a needle with one light sharpening. Hard to get a picture the flat spot is so small. Perfect Kydex w IWB loop. Comes with bag, stickers, patch and paperwork.

Asking $300 F/F or $340 G/S - Firm

Post will continue below

 

[luethge]

From the first pic - top down

SOLD Mineral Mountain Hatchet Works “Full penetration” 5160 steel. I’m second owner, purchased from a former MMHW distributor unused. I’ve carried this one in a bag, lightly touched up edge on diamond plates and a strop. This knife is a beast. This stock is close to .25, blade is about 4.75, scales are beautiful natural linen micarta - well aged. This knife is over 20 years old. This particular MMHW stands out because it has no ridiculous steel protruding from the butt - no pinky destroyer here. Sheath is ok, it works. Great defensive/utility knife or prybar - swedge is not sharpened.

SOLD Asking $165 F/F or $185 G/S

SOLD Wilburn Forge Hunter 52100 steel. I’m second owner I believe. Purchased from ACK a few months ago, unused. This knife cuts like a laser. The blade is a full height flat / convex, parkerized finish, 4 15/16 blade, 3/16 stock. One of the most comfortable handles I’ve ever held. Loveless bolts, natural linen micarta. This knife is going to make someone very happy. Makers leather sheath. Heat treatment seems EXCELLENT. Mr Wilburn knows a thing or two about forging knives.. I believe the tang is skeletonized - balance is incredible.





Thank you BLADE FORUMS!!

 

[luethge]

.

 

[derek138]

View attachment 1887922
View attachment 1887923
View attachment 1887924
View attachment 1887925
View attachment 1887926
View attachment 1887927
View attachment 1887928

From the first pic - top down

Mineral Mountain Hatchet Works “Full penetration” 5160 steel. I’m second owner, purchased from a former MMHW distributor unused. I’ve carried this one in a bag, lightly touched up edge on diamond plates and a strop. This knife is a beast. This stock is close to .25, blade is about 4.75, scales are beautiful natural linen micarta - well aged. This knife is over 20 years old. This particular MMHW stands out because it has no ridiculous steel protruding from the butt - no pinky destroyer here. Sheath is ok, it works. Great defensive/utility knife or prybar - swedge is not sharpened.

Asking $165 F/F or $185 G/S

Wilburn Forge Hunter 52100 steel. I’m second owner I believe. Purchased from ACK a few months ago, unused. This knife cuts like a laser. The blade is a full height flat / convex, parkerized finish, 4 15/16 blade, 3/16 stock. One of the most comfortable handles I’ve ever held. Loveless bolts, natural linen micarta. This knife is going to make someone very happy. Makers leather sheath. Heat treatment seems EXCELLENT. Mr Wilburn knows a thing or two about forging knives.. I believe the tang is skeletonized - balance is incredible.

Asking WITHDRAWN



Thank you BLADE FORUMS!!

Is the Full Penetration knife still available?

 

[luethge]

Is the Full Penetration knife still available?

Hey. All knives have been sold or traded. I’ll update post. Sorry about that.