Brous, BM, Spyderco, Parker, Russell, Taylor, Extrema Ratio, Boker, MT, Pohl

Feedback: +39 / =0 / -0
Joined
May 26, 2005
Messages
915
Hello All, I'm mixing things up a bit here, so.... here we go... (again X 2)

Group 1 (All knives in this group are around 75% condition)

J1 : Parker Gypsy : $50.00
J2 : SKMTF Mountain Forge : $100.00
J3 : Valor Brass Figi : SOLD
J4 : Compass Industries : SOLD
J5 : Frost Brass Ninja I : $50.00




Group 2 (All knives in this group are around 75% condition)

J6 : Valor Channel : SOLD
J7 : Frost Dragon Channel : $100.00
J8 : Frost Brass Gypsy : $100.00
J9 : Frost Stainless Steel : SOLD




Non-Grouped

J11 : Parker Gypsy w/ Box (Approx. 80 % Condition)
Price : $100.00




J15 : Taylor Manila Folder # AK-1415 w/ Box (Approx. 95 % Condition)
Brass Bolsters and Stag Inserts
Price : SOLD




3. Extreme Ratio ‘EFA Pilot’

Specifications
Blade Steel : Bohler N690 Stainless Cobalt Steel (58HRC)
Blade Length : 4 1/2 in.
Closed Length: 5 7/8 in.
OAL Length Opened : 10 3/8 in.
Anticordal Aluminum Handles w/ integrated seat belt cutter
This knife features a locking mechanism to lock the liner into opened position thereby making the potentiality of accidentally closing the knife nearly impossible.
3/16 in. thick spine
The EFA PILOT knife is an emergency and survival tool requested by the Aeronautica Militare Italiana (Air Force) to equip the Italian pilots of the new Euro Fighter jets.
Condition Note: New in Box.
Price: $275.00




4. Brous Blades / Dustin Turbin Collaboration 'Strife Flipper'

Specifications
Blade Steel : D2 Tool Steel (59 – 61 RC)
Blade Length : 3 3/4 in.
Closed Length: 5 in.
OAL Length Opened : 8 3/4 in.
3D milled and contoured Carbon Fiber Scales attached to Skeletonized Titanium Liners.
This flipper features a Brous' ball bearing pivot system for an incredibly smooth opening and closing
.19 in. thick spine. This knife is 042 / 500.
Condition Note: 99 % Condition. There are some incredibly faint rub marks on the non presentation side of the blade (only visible under the right light). The last few pics demonstrate said marks. Comes with everything it came with from Jason Brous. Original Edge and sharp as a razor. Here's a really good review of the knife by Jim Skelton if your interested... ( https://www.youtube.com/watch?v=fya2dr0crVE )

Price: (SPF)












12. Benchmade 755

Specifications
Blade Steel : M390 Super Steel
Blade Length : 2 7/8 in.
Closed Length: 3 3/4 in.
OAL Length Opened : 6 7/8 in.
This discontinued Benchmade features a green G-10 overlay over top titanium liners and a Titanium Monolock Mechanism. This is a really heavy duty little knife with an excellent fit and finish and, of course, build quality.
Condition Note: Approx 98% , There are some light carry marks on the handle, especially the pocket clip on this one. The edge appears to be all original and unsharpened.
Price: $200.00







17. A.G. Russell "Bolster Lock / Liner Lock ToothPick"

Specifications
Blade Steel : ATS-34
Blade Length : 3 5/8 in.
OAL Length Opened : 8 in.
OAL Closed : 4 3/8 in.
Hardwood Handle, S.S. Liners and Brass Hardware outfit this Folding Toothpick.
This knife features a unique closing mechanism that is, for all intents and purposes, a liner lock. The unique factor comes from the fact that the liner is integrated into the bolster (for lack of better terminology). I attempted to capture the design in the following pictures.
Condition Note : 98% plus. It's as new in box. Has the original factory edge. Shows no signs of use or carry. Unfortunately there is no box or papers with this one.
Price : $110.00









18. Pacific Cutlery International Series

Specifications
Blade Steel : 420 C Stainless
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Zamak Channel Constructed Handles
Locks Closed, doesn’t Lock in Open Position.
Condition Note : This knife is at approx. 75 % condition. It has some chipping on the handles and some scratches on the blade, as shown in the pics.
Price: $115.00








19. Benchmade Model 239S BK

Specifications
Blade Steel : 12C27 Sandvik Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Zamak Channel Constructed Handles
Excellent Lock up in Open and Closed Positions.
Condition Note : This knife is at approx. 80% condition. It had been sharpened; it has several scratches on the blade and a few chips in the coating on the handles.
Price: $115.00









29. Spyderco 'Spyderfly VG-10 Balisong'

Specifications
Blade Steel : VG-10 Stainless Steel
Blade Length : 4 1/8 in.
OAL Length Opened: 9 1/8 in.
OAL Length Closed : 5 in.
This is a fairly rare Spyderfly as it's in VG-10 blade steel. It features S.S. handles and hardware. It rides on a bushing and washer pivot system.
Condition Note : This knife is around 75% of its original condition. There are some scuffs and scratches on both the blade as well as the handles. There is also what appears to be light specks of rust on the blade. The handles appear to have a light patina on them, if magnified the pics capture this effect. Interestingly, the handles appear to be reversed as well, this is how I received the knife, so.... I left it this way. It's a good user grade knife. It functions and flips well (well, as well as a Spyderfly can flip).
Price: $300.00




 
Last edited:
31. Spyderco "Lava" Lock Back Folder (Chad Los Banos Design)

Specifications
Blade Steel : VG-10
Blade Length : 1 7/8 in.
OAL Length Opened : 5 5/16 in.
OAL Closed : 3 7/16 in.
This discontinued Spyderco features a Stainless Steel Handle. Lock Back Design.
Condition Note : Approximately 90%. The knife shows signs of carry but little to no use. It has the original factory edge and has had the pocket clip removed. The lanyard was added by the previous owner. There are some light scuffs and scratches on both the blade as well as the handle.
Price : $90.00






32. Spyderco 'Spyderfly / RainbowFly' 440-C Balisong

Specifications
Blade Steel : 440C Stainless Steel
Blade Length : 4 1/8 in.
OAL Length Opened: 9 1/8 in.
OAL Length Closed : 5 in.
This is a fairly rare Spyderfly as it's in the Rainbow Color Pattern. It features S.S. handles and hardware. It rides on a bushing and washer pivot system.
Condition Note : This knife is around 98% condition. It has the original factory edge and shows no signs of use or pocket carry. This Rainbowfly also features the original box.
Price: SOLD






40. Pohl Force 'H3 Alpha 2 Back Lock Folder'

Specifications
Blade Steel : 440C Stainless Steel (RC 58-59)
Blade Length : 4 1/2 in.
OAL Length Opened : 10 in.
OAL Closed : 5 1/2 in.
This knife was designed and inspected by Deitmar Pohl and features S.S. Liners with thick 3-D contoured Zytel scales. It also features a closed back design with a Zytel backspacer, and slotted screw construction. The blade is coated in a black titanium / aluminum / nitride (TiAlN) PVD Coating. It is an absolute tank of a German Made knife.
Knife comes with original box and paper work as well as the protective zipper pouch and signed certificate of authenticity.
Condition Note : 100% NIB
Price : $215.00





44. Benchmade Model 45S

Specifications
Blade Steel : 12c27 Sandvick Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Channel Constructed Stainless Steel Handles
This 45S comes with the original sheath. Solid lock up in both open and closed positions.
Condition Note : The Blade on this knife is in approximately 98% w/ the factory edge. The Handles, on the other hand, show some substantial signs of carry. I would rate them at 85%. There are no deep scratches but a lot of smaller / lighter scuffs and scratches which is indicative of pocket carry. A Spa trip would clean this knife up considerably.
Price: $290.00





As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.

All prices are inclusive of S&H in the U.S., there will be a 4% charge on PP, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.

It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.

I reserve the right to refuse sales to anyone for any reason. If you have red rep, I won't sell to you, don't ask! You'd only be wasting your time and energy.

First “I’ll take it” gets the cutlery.

My paypal address is : jj-guns (at) hot mail (dot) com

All trades will be considered at this time. Low ball offers will be ignored.

Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
 
Last edited:
Back
Top