ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,461
I'm trying to switch up the collection so here are some knives I'm putting up for trade. I'll be here to answer any questions you might have. If you need more details/specs/pictures, just shoot me a message and I'll have them sent over. If you're interested, feel free to start a conversation or email me at kenleung1995 at hotmail dot com. I try to check my threads fairly often so chances are I'll see your posts as well. If you just want a straightforward sale, let me know and we can have something worked out. Thanks for taking a look.
For trades, I'm looking for a: Spyderco HAP40 Lum Chinese, Spyderco ZDP Stretch, Spyderco Smock, Striders, GEC #46 Whaler, Olamics, Chris Reeves, Hinderers, Brous Anti Up, Ferrum Forges, Ziebas, Curtiss Knives, Sharp By Designs, North Arm Skaha, Koenig Arius, ZT 0454, WE Knives Eschaton, G&G Hawk Orbit, Tashi Rowdy HiTech, Microtech Stitch, Benchmade 698-181 Gold Class Foray, some balisongs, and a Graham Razel but I'll be happy to hear other offers. Worst I can do is pass and cash can be added either way.
1. Brous Blades Dynamic - near mint
Serial number 100 of 500
Well built with an impressive action
Slightly recurved tanto blade
Blade and frame have been stonewashed
Here are the exact specs: https://www.knifecenter.com/item/JB...lipper-35-d2-blade-stonewash-titanium-handles
Top notch action, great detent, locks up tight, and centering is dead on
2. Todd Begg Steelcraft Series Field Marshall - like new in box
Built by Reate
I bought this one new from Blade HQ a while back: https://www.bladehq.com/item--Todd-Begg-Steelcraft-Series-Field--48912
Never carried or used but came with a small coating imperfection on the clip
Knife has a full PVD coating but every part of it has a different finish you can see under the coating
Blade has satin flats, stonewashed grinds, and a polished fluted fuller
Intricately milled 2-tone ti frame
Runs perfectly smooth on ceramic bearings
Fires open and falls shut
Locks with zero play and centering is dead on
Comes with the box and papers
3. EOS Squid - near mint - Traded
Very well built folder with a 3.625" blade
Everything, even down to the screws, was machined all in the same shop
The inside of the frame has been extensively skeletonized so it's easier to carry than it looks
If you look closely, the machining marks were left in certain places to give it a nice effect
Blasted S35VN blade
Stonewashed ti handle with a nice satin on the flat
Flamed backspacer and clip
Opens easily with either the flipper or thumbhole and falls shut
Not 100% broken in but already runs glass smooth on ceramic bearings
Perfect centering and it locks with zero play
For trades, I'm looking for a: Spyderco HAP40 Lum Chinese, Spyderco ZDP Stretch, Spyderco Smock, Striders, GEC #46 Whaler, Olamics, Chris Reeves, Hinderers, Brous Anti Up, Ferrum Forges, Ziebas, Curtiss Knives, Sharp By Designs, North Arm Skaha, Koenig Arius, ZT 0454, WE Knives Eschaton, G&G Hawk Orbit, Tashi Rowdy HiTech, Microtech Stitch, Benchmade 698-181 Gold Class Foray, some balisongs, and a Graham Razel but I'll be happy to hear other offers. Worst I can do is pass and cash can be added either way.
1. Brous Blades Dynamic - near mint
Serial number 100 of 500
Well built with an impressive action
Slightly recurved tanto blade
Blade and frame have been stonewashed
Here are the exact specs: https://www.knifecenter.com/item/JB...lipper-35-d2-blade-stonewash-titanium-handles
Top notch action, great detent, locks up tight, and centering is dead on
2. Todd Begg Steelcraft Series Field Marshall - like new in box
Built by Reate
I bought this one new from Blade HQ a while back: https://www.bladehq.com/item--Todd-Begg-Steelcraft-Series-Field--48912
Never carried or used but came with a small coating imperfection on the clip
Knife has a full PVD coating but every part of it has a different finish you can see under the coating
Blade has satin flats, stonewashed grinds, and a polished fluted fuller
Intricately milled 2-tone ti frame
Runs perfectly smooth on ceramic bearings
Fires open and falls shut
Locks with zero play and centering is dead on
Comes with the box and papers
3. EOS Squid - near mint - Traded
Very well built folder with a 3.625" blade
Everything, even down to the screws, was machined all in the same shop
The inside of the frame has been extensively skeletonized so it's easier to carry than it looks
If you look closely, the machining marks were left in certain places to give it a nice effect
Blasted S35VN blade
Stonewashed ti handle with a nice satin on the flat
Flamed backspacer and clip
Opens easily with either the flipper or thumbhole and falls shut
Not 100% broken in but already runs glass smooth on ceramic bearings
Perfect centering and it locks with zero play
Last edited:
