Discontinued Buck 880 Strider Tanto
- thick ATS-34 blade
- titanium liners
- textured G-10 handle
- 4”± blade
- 5.5”± handle
This knife has been carried and used, but not abused. The box was long ago lost. The handles have some light scuff marks that would probably sand off. The clip also has some light, shiny scuff marks on the bead-blasted finish. The blade pivot area needs a good cleaning, but it opens smoothly and locks up solid.
The blade has only been resharpened once. Due to the thick blade, the edge is difficult to resharpen. I took it to a professional knife sharpener who set a new razor edge and sloped the bevel back a little bit, especially on the tip. The end product cuts better and looks very professional. I will post some pictures as soon as I am able to get some.
I am looking for trades in decent shape without significant damage or a lot of sharpening. They need not be new.
I am interested in trading even for the following Spydercos:
- CE Manix
- CE Manix 83mm
- SE or CE ParaMilitary
- SE Caly3
- Full-size Persian
- PE CF, ZDP Caly3 (I’d be willing to throw something else in here)
Or I would consider a combo trade for two or three of the following Spydercos:
- SE Atlantic Salt – preferred model
- SE Saver Salt – preferred model
- Endura 4 Wave – preferred model
- SE Salt 1
- SE VG-10 Caly Jr
- SE Endura 4
- SE Delica 4
- Delica 4 Wave
- SE Rescue (larger or smaller version)
- SE Native 3
- SE Cara Cara Rescue (no SS handles!)
- SE Meadowlark Rescue (no SS handles!)
- SE FRN or G10 Byrd models in general (no SS handles!)
Also looking for waterproof flashlights or waterproof headlamps.
If you are interested, please email me at jacobg@hopeengineers.com. Please note that I do not usually check my email on the weekends. If you send me an email on Friday night, I probably won’t respond until Monday morning, but I will respond then. This is the same email the my BladeForums account goes to, as well.
- thick ATS-34 blade
- titanium liners
- textured G-10 handle
- 4”± blade
- 5.5”± handle
This knife has been carried and used, but not abused. The box was long ago lost. The handles have some light scuff marks that would probably sand off. The clip also has some light, shiny scuff marks on the bead-blasted finish. The blade pivot area needs a good cleaning, but it opens smoothly and locks up solid.
The blade has only been resharpened once. Due to the thick blade, the edge is difficult to resharpen. I took it to a professional knife sharpener who set a new razor edge and sloped the bevel back a little bit, especially on the tip. The end product cuts better and looks very professional. I will post some pictures as soon as I am able to get some.
I am looking for trades in decent shape without significant damage or a lot of sharpening. They need not be new.
I am interested in trading even for the following Spydercos:
- CE Manix
- CE Manix 83mm
- SE or CE ParaMilitary
- SE Caly3
- Full-size Persian
- PE CF, ZDP Caly3 (I’d be willing to throw something else in here)
Or I would consider a combo trade for two or three of the following Spydercos:
- SE Atlantic Salt – preferred model
- SE Saver Salt – preferred model
- Endura 4 Wave – preferred model
- SE Salt 1
- SE VG-10 Caly Jr
- SE Endura 4
- SE Delica 4
- Delica 4 Wave
- SE Rescue (larger or smaller version)
- SE Native 3
- SE Cara Cara Rescue (no SS handles!)
- SE Meadowlark Rescue (no SS handles!)
- SE FRN or G10 Byrd models in general (no SS handles!)
Also looking for waterproof flashlights or waterproof headlamps.
If you are interested, please email me at jacobg@hopeengineers.com. Please note that I do not usually check my email on the weekends. If you send me an email on Friday night, I probably won’t respond until Monday morning, but I will respond then. This is the same email the my BladeForums account goes to, as well.
