Here's my latest EDC. The handles are some of my custom Burlap handles. This is my first try with this pattern and I'm still on the fence about it. It consists of 2 layers of Black burlap, one layer of Brown burlap and a layer of Natural burlap then the layers are repeated.
The sheath design is one that was inspired by one I saw on an Anza knife. This handcrafted leather sheath can be worn around the neck with an adjustable lanyard that consists of Brown camo 550 cord that is gutted. It attaches to the knife with a heavy duty Stainless Steel swivel to keep the cord from twisting when moving around a lot. It can also be worn on the belt, just simply unsnap it and use the handy belt loop on the back.
I'm discounting this knife. For some reason, my Makers Mark did not etch well. When I went to clean it up, a good portion ground off, which is unusual. Rather than risk grinding the mark off and making the blade really thin, I decided to knock off some of the asking price. It doesn't affect the performance of this razor sharp knife in the least little bit!!
If you're looking for a tough user knife to carry every day, this one will fill the bill!
Steel: 1/8" 1080
Hardware: one 1/8" black micarta pin at the front (which nearly disappears against the black burlap), one 1/8" Natural micarta, two 3/32" black micarta pins at the rear with a Stainless Steel thong tube.
Handles: Burlap phenolic laminated material - 2 layers of Black burlap, one layer of brown, one layer of natural then repeated
Blade: 3 1/4" tip to front of scales with about 3" edge. Heat treat scale left on the flats then deep blued to a black color
OAL: 6 3/4"
Price:Normally my knives this size run around $125, but I'm discounting this one as stated above to $SOLD First to reply "I'll take it" owns this beauty!
Price includes FREE USPS Priority Shipping to ConUs. Sorry, no International shipping other than to Canada. Payment methods: USPS Money Orders or PayPal at: donaldlawson@gmail.com
Thanks for looking - Donald
The sheath design is one that was inspired by one I saw on an Anza knife. This handcrafted leather sheath can be worn around the neck with an adjustable lanyard that consists of Brown camo 550 cord that is gutted. It attaches to the knife with a heavy duty Stainless Steel swivel to keep the cord from twisting when moving around a lot. It can also be worn on the belt, just simply unsnap it and use the handy belt loop on the back.
I'm discounting this knife. For some reason, my Makers Mark did not etch well. When I went to clean it up, a good portion ground off, which is unusual. Rather than risk grinding the mark off and making the blade really thin, I decided to knock off some of the asking price. It doesn't affect the performance of this razor sharp knife in the least little bit!!
If you're looking for a tough user knife to carry every day, this one will fill the bill!
Steel: 1/8" 1080
Hardware: one 1/8" black micarta pin at the front (which nearly disappears against the black burlap), one 1/8" Natural micarta, two 3/32" black micarta pins at the rear with a Stainless Steel thong tube.
Handles: Burlap phenolic laminated material - 2 layers of Black burlap, one layer of brown, one layer of natural then repeated
Blade: 3 1/4" tip to front of scales with about 3" edge. Heat treat scale left on the flats then deep blued to a black color
OAL: 6 3/4"
Price:Normally my knives this size run around $125, but I'm discounting this one as stated above to $SOLD First to reply "I'll take it" owns this beauty!
Price includes FREE USPS Priority Shipping to ConUs. Sorry, no International shipping other than to Canada. Payment methods: USPS Money Orders or PayPal at: donaldlawson@gmail.com
Thanks for looking - Donald
Last edited:
