Burnout oven for HT

  • The easily controlled temperature advances from 0° F to 500° F (0° C to 260° C) within 15 minutes and from 500° F to 1,100° F (260° C to 593 ° C) within 45 minutes
  • Maximum operating temperature is 2,000° F (1,093° C)
  • Operates on 115V, 60Hz, 14 Amps, 1680 Watts


    from 500° F to 1,100° F (260° C to 593 ° C) within 45 minutes
    I'd consider that eleven hundred to be the top temp, is that hot enough for you ?
    After shipping the heating elements would need replacing.I'd count on installing a new controller too.

 
Says the top temp is 2K No 1100f is too low
 
Burnout ovens are normally used in the 1000°F to 1300°F to burnout lost-wax molds. They all say that the max is 2000°F/, but consider like the speedometer in your car going up to 120MPH. I generally consider them good to about 1500°F. They will work for knife HT on a single carbon steel blade, but are poor substitutes for a proper knife HT oven. If the price is $100 get it, If more pass.
 
You must log in or register to reply here.
Back
Top