ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,458
I'm trying to switch up the collection so here are some knives I'm putting up for trade. I'll be here to answer any questions you might have. If you need more details/specs/pictures, just shoot me a message and I'll have them sent over. If you're interested, feel free to start a conversation or email me at kenleung1995 at hotmail dot com. I try to check my threads fairly often so chances are I'll see your posts as well. If you just want a straightforward sale, let me know and we can have something worked out. Thanks for taking a look.
For trades, I'm looking for: Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Goodwyns, Rogovets, Jason Clarks, Rassentis, some Shirogorovs, Grimsmos, Brown Knives Servo, Jason Guthries, ZT 0454, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Mark Nevling/Burr Oak Knives Combat Utility Basic - like new
Very well built 3.375" linerlock
Blade is a full flat grind wharncliffe made from clay hardened W2 with a nice hamon
There are tool mark accents added on both sides of the blade
Frame is contoured with polished carbon fiber bolsters and burgundy micarta scales
Full length blackened backspacer
Smooth action, locks with zero play, and centering is dead on
Comes with a custom stitched leather belt sheath with burgundy stingray
2. Freeman Knives Da Dozer -near mint - Traded
Very well put together 3.5" sheepsfoot
Alabama damascus blade with a dark etch and a detent ramp
Blasted ti handle slabs with a carbon fiber backspacer
Damascus clip that's been etched and then distressed to better hide wear
Blue frame hardware, blue 2-tone pivot, and blue satin pivot collars
Locks up rock solid with no play
I can't show the centering on camera since the backspacer comes around to cover the end but it's dead center as far as I can tell
Smooth action, flips reliably, and almost drops shut on it's own
Fits my hand like a glove
3. Jake Hoback Custom A10 - like new
Early full custom from Jake
Acidwashed CPM-154 blade that's thinner stock than what you'd normally find on a Hoback
The ti frame has been sand blasted, the flats were given a satin, and then it was tumbled
Milled lines on both sides of the frame
Raised carbon fiber backspacer
Opens nicely with both the flipper and thumbstuds
There a bit of blade play but lockup is 100% secure and won't close on you
Centering is dead on
For trades, I'm looking for: Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Goodwyns, Rogovets, Jason Clarks, Rassentis, some Shirogorovs, Grimsmos, Brown Knives Servo, Jason Guthries, ZT 0454, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Mark Nevling/Burr Oak Knives Combat Utility Basic - like new
Very well built 3.375" linerlock
Blade is a full flat grind wharncliffe made from clay hardened W2 with a nice hamon
There are tool mark accents added on both sides of the blade
Frame is contoured with polished carbon fiber bolsters and burgundy micarta scales
Full length blackened backspacer
Smooth action, locks with zero play, and centering is dead on
Comes with a custom stitched leather belt sheath with burgundy stingray
2. Freeman Knives Da Dozer -near mint - Traded
Very well put together 3.5" sheepsfoot
Alabama damascus blade with a dark etch and a detent ramp
Blasted ti handle slabs with a carbon fiber backspacer
Damascus clip that's been etched and then distressed to better hide wear
Blue frame hardware, blue 2-tone pivot, and blue satin pivot collars
Locks up rock solid with no play
I can't show the centering on camera since the backspacer comes around to cover the end but it's dead center as far as I can tell
Smooth action, flips reliably, and almost drops shut on it's own
Fits my hand like a glove
3. Jake Hoback Custom A10 - like new
Early full custom from Jake
Acidwashed CPM-154 blade that's thinner stock than what you'd normally find on a Hoback
The ti frame has been sand blasted, the flats were given a satin, and then it was tumbled
Milled lines on both sides of the frame
Raised carbon fiber backspacer
Opens nicely with both the flipper and thumbstuds
There a bit of blade play but lockup is 100% secure and won't close on you
Centering is dead on
Last edited: