ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,458
I'm trying to switch up the collection so here are some knives I'm putting up for trade. I'll be here to answer any questions you might have. If you need more details/specs/pictures, just shoot me a message and I'll have them sent over. If you're interested, feel free to start a conversation or email me at kenleung1995 at hotmail dot com. I try to check my threads fairly often so chances are I'll see your posts as well. If you just want a straightforward sale, let me know and we can have something worked out. Thanks for taking a look.
For trades, I'm looking for: Jon Grahams, Ochs Worx, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Jim Burkes, Blackwoods, VanderMeulens, Goodwyns, Rogovets, Jason Clarks, Grimsmos, Brown Knives Servo, Jason Guthries, ZT 0454, CKF Terra, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Mark Nevling/Burr Oak Knives Combat Utility Basic - like new
Very well built 3.375" linerlock
Blade is a full flat grind wharncliffe made from clay hardened W2 with a nice hamon
There are tool mark accents added on both sides of the blade
Frame is contoured with polished carbon fiber bolsters and burgundy micarta scales
Full length blackened backspacer
Smooth action, locks with zero play, and centering is dead on
Comes with a custom stitched leather belt sheath with burgundy stingray
2. Steve Ryan MLC - brand new
2-tone polished satin CPM-S35VN blade that measures 3.5"
Stonewashed ti frame with a polished satin on the highs
Steve's flame anodizing gives it a reflective almost-iridescent oil slick look in person
Monkey Edge frag pattern splash milling on the front and a frag pattern stripe milled onto the back
Great in hand, close to an XM-18 3.5
The knife returned from Steve not too long ago so it's basically brand new
There is lockslip if there is no pressure on the lockbar but I think it'll go away once the knife breaks in
The blade is centered but the grind is asymmetrical at the tip so it looks like it's off to the front side
Action is glass smooth and works as both a flipper and thumbstud opener
3. Jake Hoback Custom A10 - like new
Early full custom from Jake
Acidwashed CPM-154 blade that's thinner stock than what you'd normally find on a Hoback
The ti frame has been sand blasted, the flats were given a satin, and then it was tumbled
Milled lines on both sides of the frame
Raised carbon fiber backspacer
Opens nicely with both the flipper and thumbstuds
There a bit of blade play but lockup is 100% secure and won't close on you
Centering is dead on
For trades, I'm looking for: Jon Grahams, Ochs Worx, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Jim Burkes, Blackwoods, VanderMeulens, Goodwyns, Rogovets, Jason Clarks, Grimsmos, Brown Knives Servo, Jason Guthries, ZT 0454, CKF Terra, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Mark Nevling/Burr Oak Knives Combat Utility Basic - like new
Very well built 3.375" linerlock
Blade is a full flat grind wharncliffe made from clay hardened W2 with a nice hamon
There are tool mark accents added on both sides of the blade
Frame is contoured with polished carbon fiber bolsters and burgundy micarta scales
Full length blackened backspacer
Smooth action, locks with zero play, and centering is dead on
Comes with a custom stitched leather belt sheath with burgundy stingray
2. Steve Ryan MLC - brand new
2-tone polished satin CPM-S35VN blade that measures 3.5"
Stonewashed ti frame with a polished satin on the highs
Steve's flame anodizing gives it a reflective almost-iridescent oil slick look in person
Monkey Edge frag pattern splash milling on the front and a frag pattern stripe milled onto the back
Great in hand, close to an XM-18 3.5
The knife returned from Steve not too long ago so it's basically brand new
There is lockslip if there is no pressure on the lockbar but I think it'll go away once the knife breaks in
The blade is centered but the grind is asymmetrical at the tip so it looks like it's off to the front side
Action is glass smooth and works as both a flipper and thumbstud opener
3. Jake Hoback Custom A10 - like new
Early full custom from Jake
Acidwashed CPM-154 blade that's thinner stock than what you'd normally find on a Hoback
The ti frame has been sand blasted, the flats were given a satin, and then it was tumbled
Milled lines on both sides of the frame
Raised carbon fiber backspacer
Opens nicely with both the flipper and thumbstuds
There a bit of blade play but lockup is 100% secure and won't close on you
Centering is dead on