SOLD
Put this one up before with a lot of looks but no takers so I'm offering it again with some changes. Not to the knife but I made a new sheath for it. This sheath offers the most carry options of any sheath I have made to date. It is a modular kydex/leather hybrid that can be carried vertical, horizontal, scout, or as a dangler. The sheath becomes a dangler if the thumb strap is undone and wrapped back around the belt loop and snapped there. Take out a few chicago screws and remove the kydex liner for additional carry options in vertical, or horizontal by adding your large tek-lok. By the way it is totally ambidextrous. It will also have a kydex fire steel loop that will connect at the bottom.
Steel- 1095fg x 1/8
AOL- 9 1/4 inches
Grind- Flat
HT- In house- blade was clay coated, edge quenched and tempered for two 2 hour cycles
Finish- Hand sanded to 2000 grit, etched and polished back out to reveal a nice hamon
Blade- 4 1/4 inches with jimping on the spine
Handle- 5 inches
Scales- Black g10, the scales were shaped and bead blasted for a smooth uniform appearance that still gives a nice grippy feel.
Hardware- 10mm stainless chain bolts
Sheath- Modular ambidextrous Leather and Kydex with multiple carry options and styles
Questions or comments welcomed
Asking 160.00 shipped in the USA
Paypal, USPS M/O, or Certified check preferred.
Thanks for looking
Put this one up before with a lot of looks but no takers so I'm offering it again with some changes. Not to the knife but I made a new sheath for it. This sheath offers the most carry options of any sheath I have made to date. It is a modular kydex/leather hybrid that can be carried vertical, horizontal, scout, or as a dangler. The sheath becomes a dangler if the thumb strap is undone and wrapped back around the belt loop and snapped there. Take out a few chicago screws and remove the kydex liner for additional carry options in vertical, or horizontal by adding your large tek-lok. By the way it is totally ambidextrous. It will also have a kydex fire steel loop that will connect at the bottom.
Steel- 1095fg x 1/8
AOL- 9 1/4 inches
Grind- Flat
HT- In house- blade was clay coated, edge quenched and tempered for two 2 hour cycles
Finish- Hand sanded to 2000 grit, etched and polished back out to reveal a nice hamon
Blade- 4 1/4 inches with jimping on the spine
Handle- 5 inches
Scales- Black g10, the scales were shaped and bead blasted for a smooth uniform appearance that still gives a nice grippy feel.
Hardware- 10mm stainless chain bolts
Sheath- Modular ambidextrous Leather and Kydex with multiple carry options and styles
Questions or comments welcomed
Asking 160.00 shipped in the USA
Paypal, USPS M/O, or Certified check preferred.
Thanks for looking
Last edited:
