OccamsBlade
Jim Dobbler
- Joined
- Jan 23, 2014
- Messages
- 227
Hello all,
Offering these up once again, from awhile back.
Thanks for looking!
Jim
BUSHCRAFT
-Steel: 5/32" thick 01 Forced patina to help protect the blade. Flat grind.
-OAL Length: 8 7/8"
-Blade Length: 4 1/4"
-HRC tested (3 tests) at 59-61 near ricasso
-Handle is Synthetic Ivory and Wenge. G10 and vulcanized liners. Nickel silver pins.
-Sheath is 8-9oz veg tanned leather and kydex. Reversible, right or left carry.
Note: This knife has a small blemish in the liners near the butt. It's filled with epoxy and does not effect performance or integrity of the knife itself. I lowered the price to reflect this. You can see it in the outdoor image, last pic.
Asking $285 +shipping.
_________________________________________________________________________
Patch Knife #1
-Steel: 1/8" thick 1084 Forced patina to help protect the blade. Hollow grind.
-OAL Length: 9"
-Blade Length: 3"
-HRC tested (3 tests) at 58-60 on shoulder. Soldered guard.
-Handle is Deer antler, nickel silver guard, vulcanized spacers, and brass pin.
-Sheath is 8-9oz veg tanned leather, sewn with synthetic sinew. Antler tip detail.
Asking $135 +shipping.
_________________________________________________________________________
Patch Knife #2
-Steel: 1/8" thick 1084 Forced patina to help protect the blade. Hollow grind.
-OAL Length: 7 3/4"
-Blade Length: 2 1/2"
-HRC tested (3 tests) at 58-60 on shoulder.
-Handle is Deer antler, nickel silver guard, vulcanized spacer, and brass pin.
-Sheath is 8-9oz veg tanned leather, sewn with synthetic sinew. Antler bead detail.
Asking $125 +shipping.
Offering these up once again, from awhile back.
Thanks for looking!
Jim
BUSHCRAFT
-Steel: 5/32" thick 01 Forced patina to help protect the blade. Flat grind.
-OAL Length: 8 7/8"
-Blade Length: 4 1/4"
-HRC tested (3 tests) at 59-61 near ricasso
-Handle is Synthetic Ivory and Wenge. G10 and vulcanized liners. Nickel silver pins.
-Sheath is 8-9oz veg tanned leather and kydex. Reversible, right or left carry.
Note: This knife has a small blemish in the liners near the butt. It's filled with epoxy and does not effect performance or integrity of the knife itself. I lowered the price to reflect this. You can see it in the outdoor image, last pic.
Asking $285 +shipping.
_________________________________________________________________________
Patch Knife #1
-Steel: 1/8" thick 1084 Forced patina to help protect the blade. Hollow grind.
-OAL Length: 9"
-Blade Length: 3"
-HRC tested (3 tests) at 58-60 on shoulder. Soldered guard.
-Handle is Deer antler, nickel silver guard, vulcanized spacers, and brass pin.
-Sheath is 8-9oz veg tanned leather, sewn with synthetic sinew. Antler tip detail.
Asking $135 +shipping.
_________________________________________________________________________
Patch Knife #2
-Steel: 1/8" thick 1084 Forced patina to help protect the blade. Hollow grind.
-OAL Length: 7 3/4"
-Blade Length: 2 1/2"
-HRC tested (3 tests) at 58-60 on shoulder.
-Handle is Deer antler, nickel silver guard, vulcanized spacer, and brass pin.
-Sheath is 8-9oz veg tanned leather, sewn with synthetic sinew. Antler bead detail.
Asking $125 +shipping.