- Joined
- Jun 11, 2012
- Messages
- 6,973
Busse Combat
Battle Grade Fusion Battle Mistress
KILLER COOL!!
Custom Swedge Grind w/ Reinforced Tip! SEE CLOSEUP PICS!!! 
Hammered Silver Coating
Hand-Shaped Blue & Black G-10 Handle
BRAND NEW!!
EXCERPT FROM BUSSE COMBAT OFFERING : https://www.bladeforums.com/threads/the-baddest-blade-in-the-land-returns.1516985/
"Prepare for the return of the Fusion Battle Mistress!!!
The "Baddest Blade In The Land" returns in full Battle Grade dress at an incredible price!
There will be a special offer of $367.00 that is in effect until the first batch runs out! You'll save $30.00 if you get in on this deal.
After the first batch is gone, the price goes to $397.00
The BG Fusion Battle Mistress is slated to be a standard model offered on the Busse Combat website before the end of this year.
Let's Drink!
Jerry"
Specifications:
Overall Length approx. 16.25"
Blade Length: approx. 10"
Steel: SR101
Thickness: approx. .250"
Bevel Grind: Saber
Busse Combat Regular Retail Price: $547.00 + $15 Shipping
Total Retail Value: $561.95
Asking $639 Shipped TYD via Paypal or USPS Money Order
PLEASE SEE MY FEEDBACK HERE & DEAL WITH CONFIDENCE!
200+ POSITIVE FEEDBACK'S & COUNTING!!
---------------------------------------------------------------------------------------------------------
Busse Combat
Battle Grade Double Talon Battle Mistress
Desert Sage Coating
Black Canvas Micarta Handle
BRAND NEW!!
EXCERPT FROM BUSSE COMBAT OFFERING : https://web.archive.org/web/2016050.../double-talon-battle-mistress-in-battle-grade
"About the Double Talon Battle Mistress design:
I have taken the Talons from some of my early 1980's pieces and put them on the same blade as the D-Guard Battle Mistress!!!
If you look at many of my early pieces, you will note that the talons curved around as if cut from a D-Guard. . . . That's because they were.
In the early 1980's I was infatuated with D-Guards and the grip security that they brought to the table for fighting knives and choppers. However, as orders increased, it became obvious that D-Guards were just way too time consuming to make by hand. I didn't have a mill back then so I drilled two holes and then spent endless hours cutting the 1/4" thick D-2 tool steel pocket out with a jeweler's saw. Those little tiny saw blades were only good for about 1/4" length of cut before they snapped or died a toothless death!!! After this, I had to go in and try to make it look less hideous by sanding with small drum sanders! A typical 3/4" diameter drum sander would last about .0023 seconds when faced with a 1/4" thick wall of severely rough cut and jagged D-2 tool steel!!!! It was enormously time consuming to say the least!!!!
I quickly moved away from the D-Guard design and toward the double talon design because it offered many of the same benefits of the full D-Guard design but with less weight, less wasted steel, and less overall time in making them completely by hand.
If I had owned a mill back then, I think that nearly everything I made would have had a D-Guard design!!!"
Specifications:
BLADE LENGTH : 10"
OVERALL LENGTH : 15 3/4"
BLADE WIDTH : Approx 1 7/8"
BLADE THICKNESS : Approx 1/4"
STEEL : SR-101
HARDNESS : 58-60 Rc
YEAR PRODUCED : 2016
Busse Combat Regular Retail Price: $347.00 + $15 Shipping
Total Retail Value: $362 YOU SAVE $29
Asking $333 Shipped TYD ***SOLD PENDING FUNDS to ironwagon*** via Paypal or USPS Money Order
Select 'Watch Thread' At Top Right Side Of Page To Select Email Updates For Price Drops, Updates, ETC... For This Knife!
Battle Grade Fusion Battle Mistress
KILLER COOL!!
Hammered Silver Coating
Hand-Shaped Blue & Black G-10 Handle
BRAND NEW!!
EXCERPT FROM BUSSE COMBAT OFFERING : https://www.bladeforums.com/threads/the-baddest-blade-in-the-land-returns.1516985/
"Prepare for the return of the Fusion Battle Mistress!!!
The "Baddest Blade In The Land" returns in full Battle Grade dress at an incredible price!
There will be a special offer of $367.00 that is in effect until the first batch runs out! You'll save $30.00 if you get in on this deal.
After the first batch is gone, the price goes to $397.00
The BG Fusion Battle Mistress is slated to be a standard model offered on the Busse Combat website before the end of this year.
Let's Drink!
Jerry
"Specifications:
Overall Length approx. 16.25"
Blade Length: approx. 10"
Steel: SR101
Thickness: approx. .250"
Bevel Grind: Saber
Busse Combat Regular Retail Price: $547.00 + $15 Shipping
Total Retail Value: $561.95
Asking $639 Shipped TYD via Paypal or USPS Money Order
PLEASE SEE MY FEEDBACK HERE & DEAL WITH CONFIDENCE!
200+ POSITIVE FEEDBACK'S & COUNTING!!
---------------------------------------------------------------------------------------------------------
Busse Combat
Battle Grade Double Talon Battle Mistress
Desert Sage Coating
Black Canvas Micarta Handle
BRAND NEW!!
EXCERPT FROM BUSSE COMBAT OFFERING : https://web.archive.org/web/2016050.../double-talon-battle-mistress-in-battle-grade
"About the Double Talon Battle Mistress design:
I have taken the Talons from some of my early 1980's pieces and put them on the same blade as the D-Guard Battle Mistress!!!
If you look at many of my early pieces, you will note that the talons curved around as if cut from a D-Guard. . . . That's because they were.
In the early 1980's I was infatuated with D-Guards and the grip security that they brought to the table for fighting knives and choppers. However, as orders increased, it became obvious that D-Guards were just way too time consuming to make by hand. I didn't have a mill back then so I drilled two holes and then spent endless hours cutting the 1/4" thick D-2 tool steel pocket out with a jeweler's saw. Those little tiny saw blades were only good for about 1/4" length of cut before they snapped or died a toothless death!!! After this, I had to go in and try to make it look less hideous by sanding with small drum sanders! A typical 3/4" diameter drum sander would last about .0023 seconds when faced with a 1/4" thick wall of severely rough cut and jagged D-2 tool steel!!!! It was enormously time consuming to say the least!!!!
I quickly moved away from the D-Guard design and toward the double talon design because it offered many of the same benefits of the full D-Guard design but with less weight, less wasted steel, and less overall time in making them completely by hand.
If I had owned a mill back then, I think that nearly everything I made would have had a D-Guard design!!!"
Specifications:
BLADE LENGTH : 10"
OVERALL LENGTH : 15 3/4"
BLADE WIDTH : Approx 1 7/8"
BLADE THICKNESS : Approx 1/4"
STEEL : SR-101
HARDNESS : 58-60 Rc
YEAR PRODUCED : 2016
Busse Combat Regular Retail Price: $347.00 + $15 Shipping
Total Retail Value: $362 YOU SAVE $29
Asking $333 Shipped TYD ***SOLD PENDING FUNDS to ironwagon*** via Paypal or USPS Money Order
Select 'Watch Thread' At Top Right Side Of Page To Select Email Updates For Price Drops, Updates, ETC... For This Knife!
Last edited:
