All of these blades are unused, uncarried and in left-the-factory condition. All include the cardboard sheath (good for storage and shipping only) unless otherwise noted.
***PLEASE NOTE: The First "I'll take it" posted (in a new response) to this thread gets the knife or knives specified, PM me after for payment information. If you are waiting for a question to be answered and someone posts that they will take it, it's theirs. That is the only way I can be fair. Also, the prices will remain after the knife is sold.
I am not open to trades, so please do not ask. Also, I am either breaking even or taking a loss on everything listed here, so no offers please.
All prices include USPS shipping and paypal fees. If you have purchased from me before and/or would like to use the gift option, you can do so for a 3% discount. No International shipping.
Click the link below each thumbnail for the full picture.
Butaniku Long Black w/Halloween G10 = $1700
Steen Type : INFI
Blade Length: 31.5"
Blade Thickness: .25"
Overall Length: 43.5"
http://i.imgur.com/JWWLHia.jpg
Butaniku Short Black w/Halloween G10 = $1600
Steen Type : INFI
Blade Length: 23.5"
Blade Thickness: .25"
Overall Length: 35.5
http://i.imgur.com/9eq64ST.jpg
Buy Both Halloween Butaniki as a set for $3200
(Set price is gone if just one sells)
Gladius Black w/Halloween G10 (BB Kydex Sheath) = $1100
Steen Type : INFI
Blade Length: 15.25"
Blade Thickness: .30"
Overall Length: 23.25
http://i.imgur.com/FveHcDj.jpg
Moab Satin w/Black and Green G10 = $2300
Steen Type : INFI
Blade Length: 14.25
Blade Thickness: .340
Overall Length: 20.5
http://i.imgur.com/u2IsDre.jpg?1
Moabolo w/Halloween G10 = $1350
Steel Type: INFI
Blade Length: 11
Blade Thickness: .345
Overall Length: 18
http://i.imgur.com/KvmQpam.jpg?2
NMFSH LE
Blade Thickness: 5/16"
Blade Length: 9 1/2"
Overall Length: 15 1/2"
Blade Width: 2"
Grind: Full Height Flat
Steel: INFI 58-60Rc
Handle: Black Paper Micarta
Edge: Blended Zero
Finish: Hand Applied Satin Finish
Limited Edition: Serial Numbered
Price: $800
N2 = Serial #300
N3 = Serial #500
http://i.imgur.com/Ceib7jx.jpg?2
SHBM LE
Blade Length: 11"
Blade Width: 2"
Blade Thickness: 5/16"
Overall Length: 16 1/2"
Grind: Full Height Flat with Un-sharpenable Clip Point
Steel: INFI 58-60Rc
Marked 1 0f 300
S1 = Serial #70 with Green and Black G-10 = $1000
S2 = Serial #111 with Black Canvas = $915
S3 = Serial #222 with Orange and Black G-10 = $1000
http://i.imgur.com/e1DzfJR.jpg?1
***PLEASE NOTE: The First "I'll take it" posted (in a new response) to this thread gets the knife or knives specified, PM me after for payment information. If you are waiting for a question to be answered and someone posts that they will take it, it's theirs. That is the only way I can be fair. Also, the prices will remain after the knife is sold.
I am not open to trades, so please do not ask. Also, I am either breaking even or taking a loss on everything listed here, so no offers please.
All prices include USPS shipping and paypal fees. If you have purchased from me before and/or would like to use the gift option, you can do so for a 3% discount. No International shipping.
Click the link below each thumbnail for the full picture.
Butaniku Long Black w/Halloween G10 = $1700
Steen Type : INFI
Blade Length: 31.5"
Blade Thickness: .25"
Overall Length: 43.5"
http://i.imgur.com/JWWLHia.jpg
Butaniku Short Black w/Halloween G10 = $1600
Steen Type : INFI
Blade Length: 23.5"
Blade Thickness: .25"
Overall Length: 35.5
http://i.imgur.com/9eq64ST.jpg
Buy Both Halloween Butaniki as a set for $3200
(Set price is gone if just one sells)
Gladius Black w/Halloween G10 (BB Kydex Sheath) = $1100
Steen Type : INFI
Blade Length: 15.25"
Blade Thickness: .30"
Overall Length: 23.25
http://i.imgur.com/FveHcDj.jpg
Moab Satin w/Black and Green G10 = $2300
Steen Type : INFI
Blade Length: 14.25
Blade Thickness: .340
Overall Length: 20.5
http://i.imgur.com/u2IsDre.jpg?1
Moabolo w/Halloween G10 = $1350
Steel Type: INFI
Blade Length: 11
Blade Thickness: .345
Overall Length: 18
http://i.imgur.com/KvmQpam.jpg?2
NMFSH LE
Blade Thickness: 5/16"
Blade Length: 9 1/2"
Overall Length: 15 1/2"
Blade Width: 2"
Grind: Full Height Flat
Steel: INFI 58-60Rc
Handle: Black Paper Micarta
Edge: Blended Zero
Finish: Hand Applied Satin Finish
Limited Edition: Serial Numbered
Price: $800
N2 = Serial #300
N3 = Serial #500
http://i.imgur.com/Ceib7jx.jpg?2
SHBM LE
Blade Length: 11"
Blade Width: 2"
Blade Thickness: 5/16"
Overall Length: 16 1/2"
Grind: Full Height Flat with Un-sharpenable Clip Point
Steel: INFI 58-60Rc
Marked 1 0f 300
S1 = Serial #70 with Green and Black G-10 = $1000
S2 = Serial #111 with Black Canvas = $915
S3 = Serial #222 with Orange and Black G-10 = $1000
http://i.imgur.com/e1DzfJR.jpg?1