Camerer, McConnell, Stek, Crawford, 29, Bloomer, Clark, Nevling, Chamblin, Frazier

[Jimdo]

Unless otherwise noted; all knives are in 100% condition, as received from the maker.

1. Craig Camerer J.S. Stag & Damascus Balisong

Specifications
Blade Steel : Craig’s own forged Damascus (1084 & 15n20 , 60-61 RC)
Blade Length : 4 1/4 in.
OAL Length Opened: 9 ½ in.
OAL Length Closed : 5 1/2 in.
Green anodized, Titanium Handles w/ Dovetailed Sambar Stag inserts
Wicked smooth Stainless Steel Ball Bearing System, Rock Solid Lock Up in Open and Closed Positions.
Condition Note : 100% as received from Mr. Craig Camerer.
Price: $900.00






8. Dan Unger ‘Damascus’

Specifications
Blade Steel: Forged Damascus
Blade Length: 2 1/4 in.
OAL Length Opened: 6 in.
This is a unique little Damascus piece by Mr. Unger. Great grind lines and fine Damascus.
Condition Note: 100% as received from Dan.
Price: $150.00 (SPF)




9. Steve Huey Fighter

Specifications
Blade Steel : CPM-154
Blade Length : 7 in.
OAL Length : 12 1/2 in.
Micarta Handle
Bladetech Kydex Sheath
Tapered Tang , On bottom of Tang is inscribed : “N.W. Safari 92”
Condition Note : A few small blemishes on the finish of the blade, I would rate this knife at 98%.
Price : $250.00






10. Dan Unger Wharncliffe

Specifications
Blade Steel : Forged 1084 w/ Tungsten Cerokote
Blade Length : 3 1/2 in.
OAL Length : 8 1/4 in.
G-10 Handle
1/4 in. thick spine
Condition Note: 99% plus.
Price: $200.00







11. Pat and Wes Crawford Damascus & MOP Neck Knife

Specifications
Blade Steel : Rob Thomas Damascus
Blade Length : 3 in.
OAL Length : 6 1/2 in.
Presentation Grade MOP Handle
Molded Kydex Sheath with integrated Turquoise and Wolf Head by 'Semich'
Each MOP Scale is 1/8 in. thick
Price : $450.00







12. Craig Camerer 'Modified Tanto' Balisong

Specifications
Blade Steel : Elmax
Blade Length : 3 3/4 in.
OAL Length Opened: 8 ½ in.
OAL Length Closed : 3 3/4 in.
Skeletonized Titanium Handles
Wicked smooth Stainless Steel Caged Ball Bearing System, Rock Solid Lock Up in Open and Closed Positions. Smooth as butter and little to no handle play.
Condition Note : 100% as received from Mr. Craig Camerer.
Price: $750.00





13. Jeff Cover Neck Knife

Specifications
Blade Steel : ATS-34
Blade Length : 3 in.
OAL Length : 6 1/2 in.
Stabilized Burl Wood Handle
Molded Kydex Sheath
A noteworthy tidbit of information about this piece is that Jeff Cover made this with only one hand.
Condition Note: 99 % plus.
Price : $125.00




14. Alan Bloomer Damascus & Gold Lip MOP Liner Lock

Specifications
Blade Steel : Damascus
Blade Length : 3 1/4 in.
OAL Length Opened : 7 3/8 in.
OAL Closed : 4 1/8 in.
Presentation Grade Gold Lip MOP Handle
Diamond inlayed into thumb stud, file worked anodized titanium liners, file worked blade spine, each scale is 1/8 in. thick MOP, Bolster is Damascus.
Condition Note : There appears to be a small amount of pitting on the bolsters and the blade, more so on the bolsters (only noticeable under the right lighting conditions), I would rate the knife at 90%.
Price : $550.00








15. Mark Nevling / Burr Oak Damascus Liner Lock

Specifications
Blade Steel : Damascus
Blade Length : 3 1/4 in.
OAL Length Opened : 7 1/8 in.
OAL Closed : 4 1/4 in.
Walrus Ivory Handle
Diamond inlayed into thumb stud, anodized titanium liners, Damascus back spacer
Very elaborate leather and snake skin sheath
Condition Note : Everything is 100% as received from the maker, though there is a small crack on the back Ivory scale as seen in the pics.
Price : $550.00









16. Dan Unger Tanto

Specifications
Blade Steel : Clay Hardened Forged W2 w/ Visible Hamon
Blade Length : 3 3/4 in.
OAL Length : 8 3/4 in.
Paracord Wrap Handle
5/16 in. thick spine
Condition Note: Approximately 95%. There are a few scratches here and there on the knife and the paracord is slightly off color due to the knife being handled.
Price: $225.00






17. Japanese Damascus Tanto

Specifications
Blade Steel : Damascus
Blade Length : 6 5/8 in.
OAL Length : 10 in.
Hardwood Sheath and handle w/ cloth carrying case.
There's not a mark on this knife to be found. It looks like a quality piece but I don't know much about Japanese cutlery. I picked this up at the Machine Gun Shoot in Knob Creek, KY. The fella I got it from traded it in to me.
Condition Note : 99%, everything is virtually NIB but there are some VERY minute scratches on the tip of the blade presumably from inserting the knife into the sheath. Worth noting is that the Damascus steel has a VERY light etch. It's not nearly as pronounced as most of the other Damascus that I have experience with. That said, it was somewhat hard to photograph the 'grain' of the Damascus but under the right lighting it is very attractive and appears to be very well made.
Price: $250.00









20. Howard Clark, M.S. Damascus 'Scottish Dirk'

Specifications
Blade Steel : Mr. Clarks Forged Damascus
Blade Length : 5 3/4 in.
OAL Length : 8 7/8 in.
Handmade Leather Sheath by Sherry Lott of Green River Leather.
Dyed Giraffe Bone Handle and Tapered Tang
Condition Note : Approximately 98 % as received from Mr. Clark. The edge appears to be unsharpened and original. There are a few light 'dots' / 'marks' on the blade near the "top" of the handle, I believe these are forging marks, I attempted to photo them.
Price: $550.00




21. Joel Chamblin Small Skinner

Specifications
Blade Steel : CTS40CP Stainless Steel
Blade Length : 2 5/8 in.
OAL Length : 6 1/4 in.
Unique Handmade Cross Draw Leather Sheath w/ Small Basket Weave Stamping by Mr. Chamblin.
Sambar Stag Handle w/ Red Liner and S.S. Bolsters and Hardware
Condition Note : Approximately 98 % as received from Mr. Chamblin. The edge appears to be unsharpened and original. There are a few light scuffs on the mirror polished blade and bolsters that are VERY difficult to capture in the photos.
Price: $500.00

 

[Jimdo]

22. Ron Frazier Dagger

Specifications
Blade Steel : 440 C
Blade Length : 4 1/4 in.
OAL Length : 8 1/4 in.
Handmade Leather Sheath.
Snakewood Handle w/ fileworking around the entirety of the tang.
Condition Note : Approximately 98 % as received from Mr. Frazier. The edge appears to be unsharpened and original. There are a few light scuffmarks here and there on the blade and the handle; this knife is in very good shape for its age.
Price: $500.00





23. Chuck Gedraitis Balisong #124 'Modified Weehawk Tanto'

Specifications
Blade Steel : CPM154-CM
Blade Length : 4 in.
OAL Length Opened: 8 5/8 in.
OAL Length Closed : 4 5/8 in.
Blue Anodized / Bead Blasted, Skeletonized Titanium Handles and Spacers w/ Zen Pins
This knife rides on Bronze Bushings and Washers and also features a Carbon Fiber Latch
Condition Note : Approximately 95% as received from Mr. Gedraitis. This knife recently landed back to me from Chucks Spa. There are VERY light scuffs on the blade and where the latch comes into contact with the handle.
Price: $750.00




24. Loyd McConnell 'Drop Point Skinner'

Specifications
Blade Steel : S30-V Stainless Steel
Blade Length : 3 1/4 in.
OAL Length : 7 1/2 in.
Handmade Leather Sheath by Mr. McConnell
Mammoth Ivory Inserts in Engraved S.S. Bolsters and Pommel w/ S.S. Hardware
Condition Note : This knife is in approximately 98% condition as received from Mr. McConnell. There are very faint scuffs on the mirror polished blade.
Price: $850.00








25. 29 Knives / Chris Olofson 'Gayang Profile Balisong'

Specifications
Blade Steel : S-30V Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Stainless Steel Handles and Hardware w/ Dovetailed Carbon Fiber Inserts
This knife rides on a Pinned Phosphorous Bronze Bushing and Washer Pivot System
Condition Note : Approximately 80% as received from Mr. Olofson. It has clear signs of wear, carry and use. There are scuffs and scratches on both the handles as well as the blade. It's a great user grade knife, the lock up is rock solid in both open and closed positions. This knife, like all 29 Knives Balisongs, is an absolute tank.
Price: $500.00








26. W.C. Davis Double Edged Skinner

Specifications
Blade Steel : CPM 154CM (RC 60)
Blade Length : 4 1/4 in.
OAL Length : 8 3/8 in.
Handmade Leather Sheath.
Micarta Handle & Brass Bolster w/ fileworking around the entirety of the tang. This knife is double edged.
Condition Note : This knife is in approximately 90% condition as received from Mr. Davis. There are light scratches and scuffs on both the blade as well as the handle.
Price: $300.00







27. Gary Wheeler J.S. Damascus Push Dagger

Specifications
Blade Steel : 15n20/1075 Forged Ladder Pattern Damascus (324 Layers)
Blade Length : 4 1/2 in.
OAL Length : 6 in.
Handmade, Horizontal Carry, Leather Sheath.
Madrone Burl Split Tang Handle, double edged blade.
Condition Note : 100 % as received from maker.
Price: $500.00






28. Robbie Dalton Custom “Wings” Balisong

Specifications
Blade Steel : ATS-34 Steel
Blade Length : 4 5/8 in.
OAL Length Opened: 10 in.
OAL Length Closed : 5 3/8 in.
6061 T6 Anodized Aircraft Grade Aluminum Handles
This is a BIG balisong. Lots of attention to detail and a quality product, to be sure. Not the best flipper available, however.
Condition Note : The blade on this knife is 99% + , I can’t find a flaw on it. It’s the original / unsharpened edge as well. The handles are approximately 98%. There are some minute scuffs near the end of the handles, presumably from where the latch comes into contact with the handles.
Price: $350.00




35. Craig Steketee ‘Stek’ Damascus Hunter

Specifications
Blade Steel : Damascus
Blade Length : 5 in.
OAL Length : 9 3/4 in.
Includes Handmade Leather Sheath.
Stabilized Hardwood Handle w/ Mosaic Pins
Condition Note : The knife is 100% as received from Mr. Steketee, the sheath is around 98 %, there are some incredibly faint handling marks on the leather, you have to hold the sheath under the right light to see them.
Price: $300.00




36. Herb Derr Damascus Skinner

Specifications
Blade Steel : ‘Birds Eye’ Damascus
Blade Length : 4 1/4 in.
OAL Length : 9 in.
Includes Handmade Leather / Hide Sheath.
Stabilized Oosik and Hardwood Handle
Condition Note : The knife is 100% as received from Mr. Derr.
Price: $300.00




37. Loyd McConnell / Jerry Moen Collaboration “Feather” Knife

Specifications
Blade Steel : Carpenter CTS-XHP Stainless Steel
Blade Length : 2 3/4 in.
OAL Length Opened : 6 3/8 in.
OAL Closed : 3 5/8 in.
Lightning Strike Carbon Fiber Handle w/ Mother of Pearl ‘Shield’ Inlay
Decorative Pivot Pin and Serial Number ‘01’. This knife is super smooth and incredibly light weight coming in at just 1.3 ounces.
Condition Note : Approximately 98 %, there are some very light ‘scratches’ on the blade. You have to hold the knife under the right light to be able to see them. I attempted to capture them in the photos.
Price : $550.00






42. Calvin Nichols 'Drop Point Hunter'

Specifications
Blade Steel : Flamed Colored Damascus Steel (RC 58-59)
Blade Length : 5 in.
OAL Length : 9 1/4 in.
This knife features beautiful mammoth tooth ivory handles and gold plated screws. The blade and bolsters are Calvins own flamed colored damascus.
Condition Note : The knife is in approximately 90 % condition. It appears to have the original edge. There is some light pitting on the bolsters and some light 'cracks' in the mammoth tooth ivory which have been present on the knife since I received it some years back.
Price: $1,000.00







45. William Engle Sub-Hilt Fighter and Hunter ‘Prototype Set’

Specifications
Blade Steel : 1/4 in. Thick D2 Steel
Blade Length : 7 in. (Fighter) & 4 ¾ (Hunter)
OAL Length : 12 ½ (Fighter) & 9 ½ (Hunter)
Includes Handmade Wooden Display Case
Rag Micarta Handles w/ Stainless Steel Hardware and Full Tang Construction. This Prototype Set (marked as such) was made around 2002, the original buyer paid $950.00 for it at that time. Before anyone asks, NO…. I will not break up the set.
Condition Note : This set is at around 98% as received from Mr. Engle. The Hunter has a few light discolorations where the blade comes into contact with the hilt. The Sub-hilt Fighter is virtually new.
Price: $1,250.00 - SPF -




47. Charlie Edmundson 'Forged Fighter'

Specifications
Blade Steel : Forged 1095 Steel
Blade Length : 10 1/2 in.
OAL Length : 16 in.
This knife features a differentially heat treated blade w/ visable hamon and a hardwood handle. It also comes with a nicely constructed leather sheath, also made by Mr. Edmundson.
Condition Note : The knife is in approximately 95 % as received from Mr. Edmundson. There are a few light scuffs on the bolsters and a couple spots on the blade that I believe to be forging marks.
Price: $450.00 (SPF)







As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.

All prices are inclusive of S&H in the U.S., there will be a 4% charge on PP, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.

It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.

I reserve the right to refuse sales to anyone for any reason. If you got red rep, I won't sell to you, don't ask!

First “I’ll take it” gets the cutlery.

My paypal address is : jj-guns (at) hot mail (dot) com

Any and All Trades would be considered at this time, especially custom Balisongs.

Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.