All prices include shipping to a U.S. address (international shipping will be at cost). All are carbon steel blades, and with the exception of the Case, are knives that have been used. I am not looking for trades right now, as I am trying to reduce the number of knives I own.
I won't be on the forum much, so if you want to buy, make an offer on, or ask questions about one or more of these, send me an email at: dougmonad AT gmail DOT com.
Camillus Equal End (moose?)
The blades on this one have seen better days, but they each have a very nice thin, sharp edge. The bone is remarkable. Good snap and half stop on the sheepsfoot. The clip snaps open, but is a bit lazy closing.
3.625" closed
6" w/clip open (2.0625" blade length)
5.9375" w/sheepsfoot open (2" blade length)
0.375" wide
$30
_________
Craftsman (by Schrade) 9473 small stockman
Peachseed jigged delrin with the usual center pin cracks from the pin to the bottom of the handle. No half stops, good snap on all three blades.
2.8125" closed
4.8125" w/clip open (1.8125" blade length)
4.25" w/sheepsfoot open (1.25" blade length)
4.125" w/pen open (1.0625" blade length)
0.375" wide
Pictured with the Schrade 834 listed below
$30
_________
Landers, Frary & Clark jack
Beautiful old ebony handles, with one crack from the top center pin to the top of the handle. Decent, but not strong snap at the half stop and open on the spear. Pen blade is lazy opening and closing. Tip of the spear blade has been chipped off.
3.3125" closed
5.75" w/spear open (2.0625" blade length)
5.125" w/pen open (1.4375" blade length)
0.5625" wide
This picture was taken when I got it, I have since lightly sharpened the blades to remove nicks, using my Lansky.
$40
_________
Schrade 834 stockman
Lovely brown jigged delrin. No half stops, good snap on all three blades.
3.3125" closed
5.8125" w/clip open (2.125" blade length)
5.3125" w/sheepsfoot open (1.625" blade length)
5" w/spey open (1.375" blade length)
0.4375" wide
Also see pictures above, with the Craftsman
$40
I won't be on the forum much, so if you want to buy, make an offer on, or ask questions about one or more of these, send me an email at: dougmonad AT gmail DOT com.
Camillus Equal End (moose?)
The blades on this one have seen better days, but they each have a very nice thin, sharp edge. The bone is remarkable. Good snap and half stop on the sheepsfoot. The clip snaps open, but is a bit lazy closing.
3.625" closed
6" w/clip open (2.0625" blade length)
5.9375" w/sheepsfoot open (2" blade length)
0.375" wide
$30
_________
Craftsman (by Schrade) 9473 small stockman
Peachseed jigged delrin with the usual center pin cracks from the pin to the bottom of the handle. No half stops, good snap on all three blades.
2.8125" closed
4.8125" w/clip open (1.8125" blade length)
4.25" w/sheepsfoot open (1.25" blade length)
4.125" w/pen open (1.0625" blade length)
0.375" wide
Pictured with the Schrade 834 listed below
$30
_________
Landers, Frary & Clark jack
Beautiful old ebony handles, with one crack from the top center pin to the top of the handle. Decent, but not strong snap at the half stop and open on the spear. Pen blade is lazy opening and closing. Tip of the spear blade has been chipped off.
3.3125" closed
5.75" w/spear open (2.0625" blade length)
5.125" w/pen open (1.4375" blade length)
0.5625" wide
This picture was taken when I got it, I have since lightly sharpened the blades to remove nicks, using my Lansky.
$40
_________
Schrade 834 stockman
Lovely brown jigged delrin. No half stops, good snap on all three blades.
3.3125" closed
5.8125" w/clip open (2.125" blade length)
5.3125" w/sheepsfoot open (1.625" blade length)
5" w/spey open (1.375" blade length)
0.4375" wide
Also see pictures above, with the Craftsman
$40
Last edited: