2. Canal Street Cutlery 1873 Bowie
Specifications
Blade Steel : Mirror Polished D2 Tool Steel (58-60 RC)
Blade Length : 6 7/8 in.
OAL Length : 11 3/4 in.
Burgundy Micarta Handle
Leather Sheath
3/16 in. thick spine
Limited run knife of 400 units worldwide, this knife is serial number 049. The double guard is true German Nickel Silver and legitimate to the time period.
Condition Note: 99% plus.
Price: $250.00
5. Blackjack Knives / Edge Design Inc. Shining Mountains Bowie
Specifications
Blade Steel : 52-100 High Carbon Steel
Blade Length : 10 1/2 in.
OAL Length : 16 in.
American Walnut Handle
Leather Sheath
1/4 in. thick spine
These are excellent choppers, I had two prior to getting this one recently on a trade deal. This knife was designed by Mike Stewart, named by Ken Warner and produced by Blackjack Knives when they were in their Effingham IL facility for a St. Louis based knife company called Edge Design Inc. They were made circa 1996 / 1997, right before Blackjack closed their doors in Effingham. They are of exceptional quality and are quite rare.
Condition Note: Approximately 98%. There are two marks on the blade on the presentation side and two on the backside all four of which are by the logos on both sides. The pics show these marks. Original edge, never sharpened and never appears to have cut anything. On another note though, it appears that when they put this one together they forgot to match up the scales of American Walnut in terms of the coloration as the pics show
Price: $325.00
7. Blackjack Knives Trailguide Commemorative Skinner
Blade Steel : A2 Tool Steel
Blade Length : 4 3/4 in.
OAL Length : 9 in.
Hardwood Handle
Leather Sheath
3/16 in. thick spine
This is an original piece from when Blackjack was located at their Effingham IL location. Its a unique matching of guard / pommel / handle material which Blackjack was known to do a lot of, a fine knife, to be sure.
Condition Note: 98 %. There are a few light scratches on the blade that appear to have developed from taking the knife in and out of the sheath, the edge is 100 % original and appears to never have cut a thing. The handle is minty, no marks to be found.
Price: $175.00
33. Cold Steel Terminator Push Dagger
Specifications
Blade Steel : 440C Stainless Steel
Blade Length : 3 3/4 in.
OAL Length : 6 in.
Knife comes with original box and leather sheath.
This is Cold Steels first double edged push dagger brought out circa 1990.
Condition Note : This knife is approximately 98% as received from the factory. It has the original edge and has a few very faint scuff marks on the blade, presumably from taking the knife in and out of the leather sheath.
Price: $200.00
As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.
All prices are inclusive of S&H in the U.S., there will be a 4% charge on PP, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.
It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.
I reserve the right to refuse sales to anyone for any reason. If you have red rep, I won't sell to you, don't ask! You'd only be wasting your time and energy.
First Ill take it gets the cutlery.
My paypal address is : jj-guns (at) hot mail (dot) com
Only trades considered at this time would involve Custom Balisongs.
Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
Specifications
Blade Steel : Mirror Polished D2 Tool Steel (58-60 RC)
Blade Length : 6 7/8 in.
OAL Length : 11 3/4 in.
Burgundy Micarta Handle
Leather Sheath
3/16 in. thick spine
Limited run knife of 400 units worldwide, this knife is serial number 049. The double guard is true German Nickel Silver and legitimate to the time period.
Condition Note: 99% plus.
Price: $250.00
5. Blackjack Knives / Edge Design Inc. Shining Mountains Bowie
Specifications
Blade Steel : 52-100 High Carbon Steel
Blade Length : 10 1/2 in.
OAL Length : 16 in.
American Walnut Handle
Leather Sheath
1/4 in. thick spine
These are excellent choppers, I had two prior to getting this one recently on a trade deal. This knife was designed by Mike Stewart, named by Ken Warner and produced by Blackjack Knives when they were in their Effingham IL facility for a St. Louis based knife company called Edge Design Inc. They were made circa 1996 / 1997, right before Blackjack closed their doors in Effingham. They are of exceptional quality and are quite rare.
Condition Note: Approximately 98%. There are two marks on the blade on the presentation side and two on the backside all four of which are by the logos on both sides. The pics show these marks. Original edge, never sharpened and never appears to have cut anything. On another note though, it appears that when they put this one together they forgot to match up the scales of American Walnut in terms of the coloration as the pics show
Price: $325.00
7. Blackjack Knives Trailguide Commemorative Skinner
Blade Steel : A2 Tool Steel
Blade Length : 4 3/4 in.
OAL Length : 9 in.
Hardwood Handle
Leather Sheath
3/16 in. thick spine
This is an original piece from when Blackjack was located at their Effingham IL location. Its a unique matching of guard / pommel / handle material which Blackjack was known to do a lot of, a fine knife, to be sure.
Condition Note: 98 %. There are a few light scratches on the blade that appear to have developed from taking the knife in and out of the sheath, the edge is 100 % original and appears to never have cut a thing. The handle is minty, no marks to be found.
Price: $175.00
33. Cold Steel Terminator Push Dagger
Specifications
Blade Steel : 440C Stainless Steel
Blade Length : 3 3/4 in.
OAL Length : 6 in.
Knife comes with original box and leather sheath.
This is Cold Steels first double edged push dagger brought out circa 1990.
Condition Note : This knife is approximately 98% as received from the factory. It has the original edge and has a few very faint scuff marks on the blade, presumably from taking the knife in and out of the leather sheath.
Price: $200.00
As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.
All prices are inclusive of S&H in the U.S., there will be a 4% charge on PP, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.
It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.
I reserve the right to refuse sales to anyone for any reason. If you have red rep, I won't sell to you, don't ask! You'd only be wasting your time and energy.
First Ill take it gets the cutlery.
My paypal address is : jj-guns (at) hot mail (dot) com
Only trades considered at this time would involve Custom Balisongs.
Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
