- Joined
- Mar 6, 2017
- Messages
- 72
I recently was reading through a post where someone was discussing how fast or slow different tool steels rust. I think it was Stacy that suggest for someone to do some actual testing for different steels. I was actually planning do do that. Here's my thought since I don't want to go out and buy 10+ different steels, I know all of these steels are used by many of you guys here and if you have a piece of scrap say like a 2 inch square piece or what not, send it may way. I'll set up a nice little testing scenario with all our samples and should get some really good data. If you all decide not to, no worries I'll eventually get around to buying different steels and will do it down the road. If you all are game, here is the list of steels I'm wanting to test, message me and I'll send an address to send the scrap piece to. 1075, 1080, 1084, 1095, 15N20, 5160, 51200, 80CRV2, A2, D2, L6, M2, S2, S7, W1, W2 (o1 I have). I've got some ideas on different tests I want to do but if you have ideas send them my way. afterwards I'll put a nice post together with everything.
Thanks,
Thanks,