Carter Cutlery Custom Short and Stubby Neck Knife LIMITED
Direct from Carter Cutlery
STYLE: Neck Knife, Short and Stubby Model
STEEL: Hitachi White Steel Core laminated with stainless steel
HANDLE: Rare Cross-cut Carbon Fiber
PIN: Mosaic center pin
LINERS: Red
OVERALL LENGTH: 128mm (5.04")
WEIGHT: 69grams
BLADE LENGTH: 63mm
BLADE THICKNESS: *2.7mm
Never used, carried, or sharpened. Save for some hairline scratches on the forge finish and streaks on the grind, it is perfect. These scratches are clearly visible on both my photos and those on the website. It came this way and is quite normal for any fixed blade knife with a kydex sheath.
It's a fantastic little knife, but I just don't need it at the moment. It was purchased in January, 2015. It has been taken out only for periodic inspections and oiling, as well as the photos.
Asking SOLD shipped (includes PP fees). Shipping only to USA (please see note below). NO TRADES.
Pat Crawford Custom Memphis Toothpick (vendor exclusive)
Direct from KnifeArt
---Steel: S30V satin finish, 3 1/8" (7 1/8" total length)
---Handle: Full tang w/glass carbon fiber handles
---Sheath: Carbon fiber concealed carry (neck or belt carry). It comes chain necklace and belt clip.
Never used, carried, or sharpened. Blade is perfect. A very small chip on the left handle scale where the sheath catches and a small blemish in the finish on the right handle scale where the sheath catches. It came this way. Additionally, the edges around the holes in the carbon fiber are not smooth (please see photos). I'm not sure if this was the intention or just an oversight. It came this way and I never cared enough to ask. It was a vendor exclusive and only five pieces were made at that time. I'm not sure if they ever got more in. I've had this knife the longest. However, there just has never been an opportunity to use it here.
The belt loop is rather tight and won't accommodate large belts like the Spartan Enyo. It would need to be worked in.
It was purchased in July, 2011. It has been taken out only for periodic inspections and the photos.
Asking SOLD shipped (includes PP fees). Shipping only to USA (please see note below). NO TRADES.
Strider MSC Zipper
Direct from Monkey Edge
-Overall Length: 5 5/8 in
-Blade Length: 3 in
-Cutting Edge Length: 2 5/8
-Blade Thickness: .055 in
-Weight: 1.63 Ounces (without sheath)
-Blade Material: CPM S30V stainless PVD Chromium nitride coated
-Handle Material: Carbon fiber scales
-Included: Kydex sleeve sheath and Hinderer bead
Never used, carried, or sharpened. Mint. Comes with Hinderer bead shown in photos.
It was purchased in June, 2014. I bought it because I liked it. Though I knew it would be a safe queen. However, getting out of collecting so decided to part with it.
Asking SOLD shipped (includes PP fees). Shipping only to USA (please see note below). NO TRADES.
Les George Sabot - Ring Knife
Direct from Monkey Edge
Overall Length: 4.3"
Blade Length: 2"
Cutting Edge Length:1.75"
Blade Thickness: .124"
Weight: 1 oz (without sheath) 1.4 oz (including sheath)
Blade Material: CTS XHP Stainless
Sheath: Kydex sleeve
Never used, carried, or sharpened. Mint. Comes with Hinderer bead shown in photos.
It was purchased - May, 2014. The intent was to carry it, but I just haven't warmed up to it. So off it goes. It has been taken out only for inspections and the photos.
Asking SOLD shipped (includes PP fees). Shipping only to USA (please see note below). NO TRADES.
PLEASE NOTE:
I'm a US citizen with a US address, but currently and temporarily residing in Kyoto, Japan. The knife is in Kyoto and will be shipped from Kyoto...EMS with tracking (usually 4-5 days) with tracking to your door. Shipping to/from Japan is extremely efficient. I have lived on and off here for a combined total of over 7 years. And I've received and sent many knives to and from the US during this time with no problems. Almost all of my feedback on the Bay has been from Japan.
The best way to reach me is via email: garcuca263@gmail.com
Please be aware there is a time difference and there may be a delay in responding. Rest assured first in line will get the knife. Though cross-listed so time stamp rules.
First unconditional "I'll take it" posted in this thread followed by an immediate email to arrange payment gets first priority. If I do not receive an email, the knife will go to the next in line. Please state your username if you contact via email.
Any questions, please ask.
Direct from Carter Cutlery
STYLE: Neck Knife, Short and Stubby Model
STEEL: Hitachi White Steel Core laminated with stainless steel
HANDLE: Rare Cross-cut Carbon Fiber
PIN: Mosaic center pin
LINERS: Red
OVERALL LENGTH: 128mm (5.04")
WEIGHT: 69grams
BLADE LENGTH: 63mm
BLADE THICKNESS: *2.7mm
Never used, carried, or sharpened. Save for some hairline scratches on the forge finish and streaks on the grind, it is perfect. These scratches are clearly visible on both my photos and those on the website. It came this way and is quite normal for any fixed blade knife with a kydex sheath.
It's a fantastic little knife, but I just don't need it at the moment. It was purchased in January, 2015. It has been taken out only for periodic inspections and oiling, as well as the photos.
Asking SOLD shipped (includes PP fees). Shipping only to USA (please see note below). NO TRADES.
Pat Crawford Custom Memphis Toothpick (vendor exclusive)
Direct from KnifeArt
---Steel: S30V satin finish, 3 1/8" (7 1/8" total length)
---Handle: Full tang w/glass carbon fiber handles
---Sheath: Carbon fiber concealed carry (neck or belt carry). It comes chain necklace and belt clip.
Never used, carried, or sharpened. Blade is perfect. A very small chip on the left handle scale where the sheath catches and a small blemish in the finish on the right handle scale where the sheath catches. It came this way. Additionally, the edges around the holes in the carbon fiber are not smooth (please see photos). I'm not sure if this was the intention or just an oversight. It came this way and I never cared enough to ask. It was a vendor exclusive and only five pieces were made at that time. I'm not sure if they ever got more in. I've had this knife the longest. However, there just has never been an opportunity to use it here.
The belt loop is rather tight and won't accommodate large belts like the Spartan Enyo. It would need to be worked in.
It was purchased in July, 2011. It has been taken out only for periodic inspections and the photos.
Asking SOLD shipped (includes PP fees). Shipping only to USA (please see note below). NO TRADES.
Strider MSC Zipper
Direct from Monkey Edge
-Overall Length: 5 5/8 in
-Blade Length: 3 in
-Cutting Edge Length: 2 5/8
-Blade Thickness: .055 in
-Weight: 1.63 Ounces (without sheath)
-Blade Material: CPM S30V stainless PVD Chromium nitride coated
-Handle Material: Carbon fiber scales
-Included: Kydex sleeve sheath and Hinderer bead
Never used, carried, or sharpened. Mint. Comes with Hinderer bead shown in photos.
It was purchased in June, 2014. I bought it because I liked it. Though I knew it would be a safe queen. However, getting out of collecting so decided to part with it.
Asking SOLD shipped (includes PP fees). Shipping only to USA (please see note below). NO TRADES.
Les George Sabot - Ring Knife
Direct from Monkey Edge
Overall Length: 4.3"
Blade Length: 2"
Cutting Edge Length:1.75"
Blade Thickness: .124"
Weight: 1 oz (without sheath) 1.4 oz (including sheath)
Blade Material: CTS XHP Stainless
Sheath: Kydex sleeve
Never used, carried, or sharpened. Mint. Comes with Hinderer bead shown in photos.
It was purchased - May, 2014. The intent was to carry it, but I just haven't warmed up to it. So off it goes. It has been taken out only for inspections and the photos.
Asking SOLD shipped (includes PP fees). Shipping only to USA (please see note below). NO TRADES.
PLEASE NOTE:
I'm a US citizen with a US address, but currently and temporarily residing in Kyoto, Japan. The knife is in Kyoto and will be shipped from Kyoto...EMS with tracking (usually 4-5 days) with tracking to your door. Shipping to/from Japan is extremely efficient. I have lived on and off here for a combined total of over 7 years. And I've received and sent many knives to and from the US during this time with no problems. Almost all of my feedback on the Bay has been from Japan.
The best way to reach me is via email: garcuca263@gmail.com
Please be aware there is a time difference and there may be a delay in responding. Rest assured first in line will get the knife. Though cross-listed so time stamp rules.
First unconditional "I'll take it" posted in this thread followed by an immediate email to arrange payment gets first priority. If I do not receive an email, the knife will go to the next in line. Please state your username if you contact via email.
Any questions, please ask.
Last edited:
