NOTES (read first): Please ask ANY/ALL your questions before offering to buy. I usually go with first offer to buy, but I reserve to right to sell to whom I want. I do not ship to cities or locations with restrictive knife regulations. Prices are PayPal (US accounts only, G&S, with no text/comments nor mention of knives on memo), and include priority shipping (US only, to address listed on PayPal). No trades. Thank you! Raul
1. Canal Street Serpentine Double-end Jack (Blade Forums 2015 edition). The 4” serpentine frame has 440C stainless steel blades (main clip and secondary sheepsfoot) riding on a large single backspring. The clip blade is slightly recurved and has an unflattering thick grind from the factory (thick behind the edge). Has a poorly finished sharpening on main clip blade by previous-original owner, but a little refining on it should turn this blade into a good user. The W&T action on main clip is crisp, and OK on sheepsfoot. Good looking Mexican Bocote (darker tone) scales. Original box, velvet pouch and paperwork. SOLD $95
2. Winchester Sowbelly Stockman (3949S, 1991). Made by Queen under Bill Howard (who now owns/runs GEC knives). Highly polished carbon (1095) steel blades on a 3 3/4” frame with nickel silver (threaded) bolsters; brass liners. Winchester screenprinting on clip blade is good (not showing well in photo). Sharp action and snap on all blades. Beautiful well matched stag scales with pinned federal shield. Never used/carried, but has minor shopwear handling signs. No box. SOLD $130
3. AG Russell Combo: SOLD $75
A. Arkansas Hunter Lockback. All stainless-steel frame (4.25”) and fittings (liners, bolsters, pins, shield), with 3 5/8" broad and hollow ground clip blade (8Cr13MoV stainless steel, Rockwell 57-59). Green G10 scales with inlaid federal shield. Superbly hollow ground, and being relatively thin behind the edge. Really good opening/closing action and locking (all can be done one-handed). Carried a few times.
B. Small Gunstock Lockback. All stainless-steel 3 5/8” frame (closed) and fittings (liners, bolsters, pins, shield), with 2 5/8" clip point blade (8Cr13MoV stainless steel, Rockwell 57-58). 3 5/8” closed. Yellow delrin handles, with inlaid bomb shield. Can be opened/closed one handed. Never carried/used.
4. Case Knife Combo: SOLD $125
A. 2004 Limited Edition XX Seahorse Whittler (6355WH SS). Highly polished blades stainless blades; Key Lime scales; nickel silver liners, bolsters, pins, shield. New (never used/carried). In original box.
B. 2003 Mid-Folding Hunter Linerlock (6.51265LC SS). Mid-folding hunter (4“closed), polished clip stainless steel blade with thumbstuds for one hand opening (good action). Nickel silver liners, bolsters, pins, shield and stainless pocket clip. Bonestag handles. It has 5 X's and 2 dots on blade tang. I carried it a handful of times, looks new. In original box.
C. 2000 Russlock XX (V51953L SS). Russlock (linerlock with opening tang extension), medium sized (3.5” frame; 4“ total closed length with extended tang). Polished clip stainless steel blade. Nickel silver liners, bolsters, pins, shield. Vintage smooth stag handles (well matched) with no chips/cracks. Good opening/closing action. 5 X's and 5 dots on tang. New, never used/carried. No box.
1. Canal Street Serpentine Double-end Jack (Blade Forums 2015 edition). The 4” serpentine frame has 440C stainless steel blades (main clip and secondary sheepsfoot) riding on a large single backspring. The clip blade is slightly recurved and has an unflattering thick grind from the factory (thick behind the edge). Has a poorly finished sharpening on main clip blade by previous-original owner, but a little refining on it should turn this blade into a good user. The W&T action on main clip is crisp, and OK on sheepsfoot. Good looking Mexican Bocote (darker tone) scales. Original box, velvet pouch and paperwork. SOLD $95
2. Winchester Sowbelly Stockman (3949S, 1991). Made by Queen under Bill Howard (who now owns/runs GEC knives). Highly polished carbon (1095) steel blades on a 3 3/4” frame with nickel silver (threaded) bolsters; brass liners. Winchester screenprinting on clip blade is good (not showing well in photo). Sharp action and snap on all blades. Beautiful well matched stag scales with pinned federal shield. Never used/carried, but has minor shopwear handling signs. No box. SOLD $130
3. AG Russell Combo: SOLD $75
A. Arkansas Hunter Lockback. All stainless-steel frame (4.25”) and fittings (liners, bolsters, pins, shield), with 3 5/8" broad and hollow ground clip blade (8Cr13MoV stainless steel, Rockwell 57-59). Green G10 scales with inlaid federal shield. Superbly hollow ground, and being relatively thin behind the edge. Really good opening/closing action and locking (all can be done one-handed). Carried a few times.
B. Small Gunstock Lockback. All stainless-steel 3 5/8” frame (closed) and fittings (liners, bolsters, pins, shield), with 2 5/8" clip point blade (8Cr13MoV stainless steel, Rockwell 57-58). 3 5/8” closed. Yellow delrin handles, with inlaid bomb shield. Can be opened/closed one handed. Never carried/used.
4. Case Knife Combo: SOLD $125
A. 2004 Limited Edition XX Seahorse Whittler (6355WH SS). Highly polished blades stainless blades; Key Lime scales; nickel silver liners, bolsters, pins, shield. New (never used/carried). In original box.
B. 2003 Mid-Folding Hunter Linerlock (6.51265LC SS). Mid-folding hunter (4“closed), polished clip stainless steel blade with thumbstuds for one hand opening (good action). Nickel silver liners, bolsters, pins, shield and stainless pocket clip. Bonestag handles. It has 5 X's and 2 dots on blade tang. I carried it a handful of times, looks new. In original box.
C. 2000 Russlock XX (V51953L SS). Russlock (linerlock with opening tang extension), medium sized (3.5” frame; 4“ total closed length with extended tang). Polished clip stainless steel blade. Nickel silver liners, bolsters, pins, shield. Vintage smooth stag handles (well matched) with no chips/cracks. Good opening/closing action. 5 X's and 5 dots on tang. New, never used/carried. No box.
Last edited:
