dericdesmond
Gold Member
- Joined
- Sep 10, 2007
- Messages
- 15,432
$695 all in shipped to the USA 50 ppff/zelle/usps mo/check
Email dericdesmond at yahoo if interested
Trade consideration towards CPK.
I would straight trade for a no frills CPK DEK3 or EDC 3 + $50
One Handle scale is not perfectly flush with the knife but easily overlooked.
Has a small patch of coating smoothing that can only really be seen in the right (darker) light. This was here before I made it a sheath. It’s virtually unused with exception to using it to make the sheath.
See pics from original thread here https://www.bladeforums.com/threads/custom-shop-nmsfno-variant-w-kydex.1950558/
The sheath works pretty well despite me having to create channel galore in order to give it decent action and avoid ridiculous drag. I also didnt have to heat gun tinker with the mouth after setting the rivets which is rare. It has a very minor amount of resistance when inserting it that the heat gun might remedy but Ive chose to not risk messing with it and creating other characteristics that bother me more. I think I could also maybe add another eyelet which would give it a bit more rigid retention but Imo its strong enough (has some clicky) compared to other sheaths Ive owned that cost top $. There is no teklok but I think if you add one it will dial that retention up a C-hair more. Ive inserted the knife close to 10 times and its not buggered the coating. Front is FDE and back is orange.
Email dericdesmond at yahoo if interested
Trade consideration towards CPK.
I would straight trade for a no frills CPK DEK3 or EDC 3 + $50
One Handle scale is not perfectly flush with the knife but easily overlooked.
Has a small patch of coating smoothing that can only really be seen in the right (darker) light. This was here before I made it a sheath. It’s virtually unused with exception to using it to make the sheath.
See pics from original thread here https://www.bladeforums.com/threads/custom-shop-nmsfno-variant-w-kydex.1950558/
The sheath works pretty well despite me having to create channel galore in order to give it decent action and avoid ridiculous drag. I also didnt have to heat gun tinker with the mouth after setting the rivets which is rare. It has a very minor amount of resistance when inserting it that the heat gun might remedy but Ive chose to not risk messing with it and creating other characteristics that bother me more. I think I could also maybe add another eyelet which would give it a bit more rigid retention but Imo its strong enough (has some clicky) compared to other sheaths Ive owned that cost top $. There is no teklok but I think if you add one it will dial that retention up a C-hair more. Ive inserted the knife close to 10 times and its not buggered the coating. Front is FDE and back is orange.
