Up for sale are 2 of my custom C. Gedraitis knives.
First is a custom Raptor folder.
Here are the specs from the maker:
"The blade is 3-7/8in long made of 154CM with a shark bite opener. The bolsters, liners and slip are titanium that are anodized blue. The clip has been textured to resist scratching. The scales are stabilized curly Koa and have great color, shimmer and character. The backspacer is also titanium. I heat colored the screws to keep the theme. Both sides have been drilled and tapped for the pocket clip. Currently it is set for left side carry. Overall length is 8-7/8 open and closed it is 4-7/8".
I have carried and used this one lightly, but kept the edge touched up with stropping on my Wicked Edge. Due to being carried, there are some very light signs of wear on the bolsters and blade. This knife will accept Emerson compatible aftermarket clips, such as Steel Flame's clips. Lock-up is a little late on this one (hope you can see it in the photos below), but is rock solid with no wiggle. Price was over $650 new from maker.
Selling price on this one is $SOLD $450 $500 $550 shipped, payment via Paypal (I'll eat the fees on this one), or money order. Please keep this to a USA 50 only sale please.
Next up is a custom Pathfinder Tanto flipper.
Here are the specs from the maker:
The blade is 3-1/2 in long, .145 thick made of 154CM. The main bevels are hollow ground, the false edge is flat ground and the tip is convex ground. The bolsters are titanium with a satin finish and I hid the bolster screws for a cleaner look. The scales are stabilized curly Koa. I anodized the Ti liners blue and textured the clip to reduce scratching. Both sides have been drilled and tapped for a 3 hole pocket clip. There is also the hidden lanyard pin you requested. The backspacer is also titanium and the open length is 7-5/8.
This one has only seen a couple of days of pocket time, so just some very faint wear lines/scratches on blade and bolsters. It's cut nothing more than paper, so it still has the original edge on it. One thing to point out is that this knife does have some side to side blade wiggle at lock up when the pivot is set to allow easy blade deployment with the flipper. It doesn't seem to compromise the lock strength, but I do want to point it out. It was sent back to the maker to adjust this, and he took all the slack out he could, but some still remains. Price on this one was $600 from the maker.
Selling price on this one is SOLD shipped, payment via Paypal (I'll eat the fees on this one), or money order. Please keep this to a USA 50 only sale please.
I really would like to sell these, but will always listen to reasonable trade offers.
Please email/PM me with any questions or offers.
First is a custom Raptor folder.
Here are the specs from the maker:
"The blade is 3-7/8in long made of 154CM with a shark bite opener. The bolsters, liners and slip are titanium that are anodized blue. The clip has been textured to resist scratching. The scales are stabilized curly Koa and have great color, shimmer and character. The backspacer is also titanium. I heat colored the screws to keep the theme. Both sides have been drilled and tapped for the pocket clip. Currently it is set for left side carry. Overall length is 8-7/8 open and closed it is 4-7/8".
I have carried and used this one lightly, but kept the edge touched up with stropping on my Wicked Edge. Due to being carried, there are some very light signs of wear on the bolsters and blade. This knife will accept Emerson compatible aftermarket clips, such as Steel Flame's clips. Lock-up is a little late on this one (hope you can see it in the photos below), but is rock solid with no wiggle. Price was over $650 new from maker.
Selling price on this one is $SOLD $450 $500 $550 shipped, payment via Paypal (I'll eat the fees on this one), or money order. Please keep this to a USA 50 only sale please.
Next up is a custom Pathfinder Tanto flipper.
Here are the specs from the maker:
The blade is 3-1/2 in long, .145 thick made of 154CM. The main bevels are hollow ground, the false edge is flat ground and the tip is convex ground. The bolsters are titanium with a satin finish and I hid the bolster screws for a cleaner look. The scales are stabilized curly Koa. I anodized the Ti liners blue and textured the clip to reduce scratching. Both sides have been drilled and tapped for a 3 hole pocket clip. There is also the hidden lanyard pin you requested. The backspacer is also titanium and the open length is 7-5/8.
This one has only seen a couple of days of pocket time, so just some very faint wear lines/scratches on blade and bolsters. It's cut nothing more than paper, so it still has the original edge on it. One thing to point out is that this knife does have some side to side blade wiggle at lock up when the pivot is set to allow easy blade deployment with the flipper. It doesn't seem to compromise the lock strength, but I do want to point it out. It was sent back to the maker to adjust this, and he took all the slack out he could, but some still remains. Price on this one was $600 from the maker.
Selling price on this one is SOLD shipped, payment via Paypal (I'll eat the fees on this one), or money order. Please keep this to a USA 50 only sale please.
I really would like to sell these, but will always listen to reasonable trade offers.
Please email/PM me with any questions or offers.
Last edited:
