- Joined
- Jan 9, 2014
- Messages
- 527
Here are our three kitchen models. Every knife is made by my dad and myself using top quality materials and some automation (cnc milling) to help keep prices down. Both our CNC (with milling lines) and satin finishes are shown below but we don't show every combination of blade finish and handle color. For photos of each variation and information on our knives or to purchase a knife, visit our website!
**A note to american customers: the Canadian dollar is currently a lot weaker than the USD, which means savings of around 25% for you!** prices are listed in both CAD and USD (our website prices can be viewed in either currency)
Alder 8" chef's knife:
The Alder is a classic german style 8" chef's knife. A nice wide blade and full handle make it very comfortable to use. It slices well yet has good backbone for demanding tasks like opening squash. The blade is made of cpm S35VN stainless, which takes a great edge and keeps it, without being difficult to sharpen.
Specs:
Blade steel: CPM S35VN
Scale material: Black G10
Blade hardness: HRC 59-61
Blade length: 8.2" (20.8cm)
Over all length: 13.2" (33.5cm)
Blade thickness at spine: 0.095″ (2.4mm)
"Grind": flat
Cutting edge angle (inclusive): 20°
Weight: 7.0 oz (200 grams)
Made in BC, Canada
Price(Canadian $): $169.00-194.00 depending on blade finish.
**approximate USD price** 130-150
Sitka 7" santoku:
The Sitka is our take on the popular Santoku. It features a thin blade and shallow edge angle to allow for precise slicing and chop cutting. This knife push cuts beautifully. On the G10 scales we hollow out the back to achieve good balance with the light blade. The CPM S35VN blade steel takes a razor edge at 18 degrees (inclusive) and holds it well.
Specs:
Blade steel: CPM S35VN
Scale material: Black G10
Blade hardness: HRC 59-61
Blade length: 7.1" (18cm)
Over all length: 12" (30.5cm)
Blade thickness at spine: 0.080″ (2.03mm)
"Grind": flat
Cutting edge angle (inclusive): 18°
Weight: 6.0 oz. (170 grams)
Made in BC, Canada
Price(Canadian $): $169-194 depending on blade finish
**approximate USD price** 130-150
Trillium paring:
The trillium is excellent for all paring tasks from peeling and coring to light board work. Specs below photos
Specs:
Blade steel: CPM S35VN
Scale material: G10 (red,neon green,black), Pacific Yew or Western Maple
Blade hardness: HRC 59.5-61
Blade length: 3.6" (9.14 cm)
Over all length: 8.1" (20.6cm)
Blade thickness at spine: 0.060″ (1.5mm)
"Grind": flat
Cutting edge angle (inclusive): 20°
Weight: G10: 2.2 oz. (65 grams)
Yew: 1.6 oz. (45 grams)
Maple: 1.4 oz. (40 grams)
Made in BC, Canada
Price(Canadian $): 59-84 depending on blade finish and scale type.
**approximate USD price** 46-65
**A note to american customers: the Canadian dollar is currently a lot weaker than the USD, which means savings of around 25% for you!** prices are listed in both CAD and USD (our website prices can be viewed in either currency)
Alder 8" chef's knife:
The Alder is a classic german style 8" chef's knife. A nice wide blade and full handle make it very comfortable to use. It slices well yet has good backbone for demanding tasks like opening squash. The blade is made of cpm S35VN stainless, which takes a great edge and keeps it, without being difficult to sharpen.
Specs:
Blade steel: CPM S35VN
Scale material: Black G10
Blade hardness: HRC 59-61
Blade length: 8.2" (20.8cm)
Over all length: 13.2" (33.5cm)
Blade thickness at spine: 0.095″ (2.4mm)
"Grind": flat
Cutting edge angle (inclusive): 20°
Weight: 7.0 oz (200 grams)
Made in BC, Canada
Price(Canadian $): $169.00-194.00 depending on blade finish.
**approximate USD price** 130-150
Sitka 7" santoku:
The Sitka is our take on the popular Santoku. It features a thin blade and shallow edge angle to allow for precise slicing and chop cutting. This knife push cuts beautifully. On the G10 scales we hollow out the back to achieve good balance with the light blade. The CPM S35VN blade steel takes a razor edge at 18 degrees (inclusive) and holds it well.
Specs:
Blade steel: CPM S35VN
Scale material: Black G10
Blade hardness: HRC 59-61
Blade length: 7.1" (18cm)
Over all length: 12" (30.5cm)
Blade thickness at spine: 0.080″ (2.03mm)
"Grind": flat
Cutting edge angle (inclusive): 18°
Weight: 6.0 oz. (170 grams)
Made in BC, Canada
Price(Canadian $): $169-194 depending on blade finish
**approximate USD price** 130-150
Trillium paring:
The trillium is excellent for all paring tasks from peeling and coring to light board work. Specs below photos
Specs:
Blade steel: CPM S35VN
Scale material: G10 (red,neon green,black), Pacific Yew or Western Maple
Blade hardness: HRC 59.5-61
Blade length: 3.6" (9.14 cm)
Over all length: 8.1" (20.6cm)
Blade thickness at spine: 0.060″ (1.5mm)
"Grind": flat
Cutting edge angle (inclusive): 20°
Weight: G10: 2.2 oz. (65 grams)
Yew: 1.6 oz. (45 grams)
Maple: 1.4 oz. (40 grams)
Made in BC, Canada
Price(Canadian $): 59-84 depending on blade finish and scale type.
**approximate USD price** 46-65
Last edited: