- Joined
- Jul 8, 2008
- Messages
- 1,079
Here is a nice little parer pattern that a customer requested awhile back, it turned out to be such a nice little knife that I kept the pattern we came up with and have been making them ever since.
OAL- 8 1/4"
blade- 3 1/2" long tip to scales, .053" thick at the spine, .023" measured 1/4" behind the edge, and .003" thick at the shoulder of the edge. 3/4" wide
steel- 1095 high carbon, differentially hardened. heat treat includes a double normalize, double anneal, triple edge quench and triple temper for a really nice performing blade that takes and holds a great edge and yet is easy to resharpen!
grind- a full flat grind, sharpened on a DMT 325 diamond hone with micro bevels, to an aggressive razor edge
finish- handsanded 400 grit
handle- Purpleheart with peened brass pins. handle is finished with 200 grit with the lines running lengthwise with the handle so it looks good yet isn't slick
weight - 1.90 ounces
$90 plus $5 for shiping/insurance to CONUS. I can accept paypal Joe357m@bresnan.net or money order. there are also other parers on my website at caltoncutlery.com
First to post "ill take it, gets it"! there are also more parers on my website at www.caltoncutlery.com under the kitchen knives section!
Joe Calton
contact Caltoncutlery@yahoo.com
www.CaltonCutlery.com
Performance above all else!
subscribe on youtube!! https://www.youtube.com/channel/UCKANrAO1QF646avb9p9B21A
OAL- 8 1/4"
blade- 3 1/2" long tip to scales, .053" thick at the spine, .023" measured 1/4" behind the edge, and .003" thick at the shoulder of the edge. 3/4" wide
steel- 1095 high carbon, differentially hardened. heat treat includes a double normalize, double anneal, triple edge quench and triple temper for a really nice performing blade that takes and holds a great edge and yet is easy to resharpen!
grind- a full flat grind, sharpened on a DMT 325 diamond hone with micro bevels, to an aggressive razor edge
finish- handsanded 400 grit
handle- Purpleheart with peened brass pins. handle is finished with 200 grit with the lines running lengthwise with the handle so it looks good yet isn't slick
weight - 1.90 ounces
$90 plus $5 for shiping/insurance to CONUS. I can accept paypal Joe357m@bresnan.net or money order. there are also other parers on my website at caltoncutlery.com
First to post "ill take it, gets it"! there are also more parers on my website at www.caltoncutlery.com under the kitchen knives section!
Joe Calton
contact Caltoncutlery@yahoo.com
www.CaltonCutlery.com
Performance above all else!
subscribe on youtube!! https://www.youtube.com/channel/UCKANrAO1QF646avb9p9B21A