Chop Shop Firesale, Round 2! (modded knives for sale)

Feedback: +49 / =0 / -0
Joined
Jun 20, 2015
Messages
652
For sale are modded knives, except the Sequel. Some have been minorly modified (such as the Rectifier), and some have been drastically chopped (such as the Velox), so be sure to read the descriptions and look at the pics carefully, so that you know what you’re getting!

timestamp/group shot: https://imgur.com/a/YaD6lRg

1. WE 803F Rectifier ($100/C)SOLD
album: https://imgur.com/a/TzafCMd
  • Scales chamfered(semi-contoured).
Blade has been sharpened, but not reprofiled. Used very lightly. Amazing slicer (on the Spydie Chap level, maybe even slicier!). Detent is a little on the light side to accommodate both spydie flicking and flipping.

2. Benchmade 707 Sequel *unmodded ($105/C) SOLD
album: https://imgur.com/a/NVAaCnY

Blade has been sharpened and used. Lots of light scratches on the blade (see pics), but edge is still in really good shape. Some signs of wear on clip and handles. Action and centering are decent (centering is just a hair off to the clip side).

3. Boker Excalibur Decade Chop ($70/C) SOLD
album: https://imgur.com/a/xYFk6yu
  • Shortened handle and blade (Blade: 3” Handle: 3.8”)

  • blade reprofiled to hybrid wharncliffe

  • contoured the carbon fiber scales
Blade has been sharpened, lightly used. Some small scratches on blade. Good action and centering. Tip down only.

4. ZT0566 ($70/C) SOLD
album: https://imgur.com/a/bexybeI
  • Custom contoured scale in C-tek/CF

  • De-assisted

  • Removed flipper tab

  • Added finger choil

  • custom hardware (blue ti screws)

  • Lockside has lots of partial holes drilled on the inside to reduce weight (estimated weight loss: .5 oz).
Blade was reprofiled to ~15 dps by previous owner, used lightly. The rear scale screw is missing. Scale is still solidly attached though, no wiggle or gaps. I botched the ‘milling’ inside the lockside and went too far in some places, creating some visible dimples and holes on the outside (see pics). Centering is just slightly off towards presentation side, action is super smooth.

5. Factor Equipment Iconic Compact CF ($45/D) SOLD
album: https://imgur.com/a/O4ye06t
  • Removed flipper tab

  • Further contoured CF scale

  • Lockside has been scotch-brite finished.
Blade has been sharpened and reprofiled to ~17 dps, lightly used.
Pivot screw was stripped, and now has dremel cut slot to allow for flathead access. I sanded through most of the Factor logo in the scale, but you can still see it from some angles. Good action and centering.

6. Kizer Velox 2 Ti Chop ($65/C-) SOLD
album: https://imgur.com/a/fGT4YFr
  • Shortened handle and blade (Blade: 2.75” Handle: 3.75”)

  • blade reprofiled to hybrid wharncliffe

  • blade spine rounded

  • Handles stonewashed
Blade was reprofiled to ~15 dps by previous owner, used lightly. Uneven edge bevel where previous owner attempted to sharpen out the recurve. Light scratches on the blade (lockside flat). I did a sloppy attempt to contour the butt of the handles, and hoped a stonewashing would mask it, but it didn’t quite (see pics). Also, I imperfectly crowned the blade spine – there’s a couple sloppy areas (see pics). Some wear on the blue hardware, with color missing in spots. No clip. Really nice ergos, buttery smooth action.
 
Last edited:
Back
Top