CPE_Knives
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 29, 2012
- Messages
- 1,704
Good Afternoon,
This blade is made from 1/4" 80CRV2 flat ground to 400 grit and finished on an ultra fine scotch brite belt. The handle is Black G10 and Stainless.
With the fullers I managed to get the weight down to 19.22 ounces which is good for a 1/4" thick 12" long blade. As a point of reference the ESEE Junglas is 22.5 ounces with a 3/16" thick 10.5" long blade.
The balance point is 3 inches in front of the handle which gives a really nice chopper feel without feeling like it wants to get away from you on a full swing.
For the sheath I did a Baldric design similar to a Roman Gladius sheath and added several more D rings so there are lots of carry options. Everything is fully ambidextrous, I even did the leather carving on both sides for this one. The copper pieces were all hammered into shape so they are work hardened and very tough.
Price $450, shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 1/4" 80CRV2
Grind: Full Flat
Blade: 12"
Cutting Edge: 11.5"
Handle Material: Black G10 and Stainless
Overall Length: 17 1/2"
Sheath: Leather and Copper
Weight: 19.22 Ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
This blade is made from 1/4" 80CRV2 flat ground to 400 grit and finished on an ultra fine scotch brite belt. The handle is Black G10 and Stainless.
With the fullers I managed to get the weight down to 19.22 ounces which is good for a 1/4" thick 12" long blade. As a point of reference the ESEE Junglas is 22.5 ounces with a 3/16" thick 10.5" long blade.
The balance point is 3 inches in front of the handle which gives a really nice chopper feel without feeling like it wants to get away from you on a full swing.
For the sheath I did a Baldric design similar to a Roman Gladius sheath and added several more D rings so there are lots of carry options. Everything is fully ambidextrous, I even did the leather carving on both sides for this one. The copper pieces were all hammered into shape so they are work hardened and very tough.
Price $450, shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 1/4" 80CRV2
Grind: Full Flat
Blade: 12"
Cutting Edge: 11.5"
Handle Material: Black G10 and Stainless
Overall Length: 17 1/2"
Sheath: Leather and Copper
Weight: 19.22 Ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
......Great work.... Blade and pants
.....Shit it is Thursday