- Joined
- May 13, 2005
- Messages
- 407
This is a knife I have been making while working on my new workshop.
The blade was made to my design but I have heavily modified it, not much is left untouched.
Handle is made with striped ebony, pewter liners and torx screws.
The sheath is my second try with this design.
It is lined with grey silk, has a pewter welt and a matching torx screw in the stud.
(Also has waaaaay too many stiches )
Very light and nimble feeling knife with a sheath that allows quick and easy accsess to the knife.
Any and all comments are welcome.
Regards
/Magnus
The blade was made to my design but I have heavily modified it, not much is left untouched.
Handle is made with striped ebony, pewter liners and torx screws.
The sheath is my second try with this design.
It is lined with grey silk, has a pewter welt and a matching torx screw in the stud.
(Also has waaaaay too many stiches )
Very light and nimble feeling knife with a sheath that allows quick and easy accsess to the knife.
Any and all comments are welcome.
Regards
/Magnus