I'm in the mood to blow these out this weekend.
All blades are forged and heat treated in a water quench and then tempered by me to a hardness RC about 63+, using bladesmithing as taught to me by Murray Carter.
All come with kydex sheath
Payment is via PayPal, check or money order.
Free priority mail shipping in the US. International is ok, shipping to be quoted
First up -
SOLD Aviator model with ebony wood and white liners. 3.5 blade in Suminagashi steel (white carbon steel core ) with mild steel outer.
. 14 thick just in front of the handle and tapers. Peened nickel silver pins. 7 3/4 OAL
asking $165 SOLD
Neck knife
asking $135
This was forged by me at Carter Cutlery March 23rd.
Hitachi white steel core clad with stainless . Just over 3" blade , 6 1/8" oal.
Comes with kydex neck carry sheath.
Ironwood handle, red and white liners
This neck knife is a smaller Carter Cutlery pattern, blade just under 2.7" cutting length.
A general utility knife with a spine just under .1 thick. micarta handles, white liners.
Overall 5.5
Asking Price: $85
This is a 10 Carter Cutlery Whitecrane with a 5 blade in Suminagashi steel (white carbon steel core ). Kingwood handles, white liner, brass peened pins. Swedge ground
This was forged at Murray Carter's shop in Oregon March 24/25 by me under his guidance.
The blade is etched to show the pattern and it has a mildly poilshed, yet dull satin finsh to it.
OAL 10
Blade 5
Thickness at middle spine - 1/8"
height at middle - 1.34"
tang tapers to about .08
Note - there is scratch line on the ricasso near the front of the handle, presentation side. This is from a razor blade cleanup (amateur mistake :-()
Asking Price: SOLD $240(reduced)
Thanks for looking.
Harbeer
HSC /// knives
All blades are forged and heat treated in a water quench and then tempered by me to a hardness RC about 63+, using bladesmithing as taught to me by Murray Carter.
All come with kydex sheath
Payment is via PayPal, check or money order.
Free priority mail shipping in the US. International is ok, shipping to be quoted
First up -
SOLD Aviator model with ebony wood and white liners. 3.5 blade in Suminagashi steel (white carbon steel core ) with mild steel outer.
. 14 thick just in front of the handle and tapers. Peened nickel silver pins. 7 3/4 OAL
asking $165 SOLD
Neck knife
asking $135
This was forged by me at Carter Cutlery March 23rd.
Hitachi white steel core clad with stainless . Just over 3" blade , 6 1/8" oal.
Comes with kydex neck carry sheath.
Ironwood handle, red and white liners
This neck knife is a smaller Carter Cutlery pattern, blade just under 2.7" cutting length.
A general utility knife with a spine just under .1 thick. micarta handles, white liners.
Overall 5.5
Asking Price: $85
This is a 10 Carter Cutlery Whitecrane with a 5 blade in Suminagashi steel (white carbon steel core ). Kingwood handles, white liner, brass peened pins. Swedge ground
This was forged at Murray Carter's shop in Oregon March 24/25 by me under his guidance.
The blade is etched to show the pattern and it has a mildly poilshed, yet dull satin finsh to it.
OAL 10
Blade 5
Thickness at middle spine - 1/8"
height at middle - 1.34"
tang tapers to about .08
Note - there is scratch line on the ricasso near the front of the handle, presentation side. This is from a razor blade cleanup (amateur mistake :-()
Asking Price: SOLD $240(reduced)
Thanks for looking.
Harbeer
HSC /// knives
Last edited:
