Closed for repost

[OccamsBlade]

-Steel: 5/32" thick 01 Forced patina to help protect the blade. Flat grind.
-OAL Length: 8 7/8"
-Blade Length: 4 1/4"
-HRC tested (3 tests) at 59-61 near ricasso

-Handle is Synthetic Ivory and Wenge. G10 and vulcanized liners. Nickel silver pins.
-Sheath is 8-9oz veg tanned leather and kydex. Reversible, right or left carry.

Note: This knife has a small blemish in the liners near the butt. It's filled with epoxy and does not effect performance or integrity of the knife itself. I lowered the price to reflect this. You can see it in the outdoor image, last pic.

Asking $300 +shipping.

 

[OccamsBlade]

-Steel: 5/32" thick 01 Forced patina to help protect the blade. Flat grind.
-OAL Length: 6 3/4"
-Blade Length: 3 1/4"
-HRC tested (3 tests) at 59-61 near ricasso

-Handle Macassar Ebony and Black Linen Micarta. Carbon fiber and brass pins.
-Sheath is Kydex.

Asking $200 +shipping.

 

[OccamsBlade]

Patch Knife #1
-Steel: 1/8" thick 1084 Forced patina to help protect the blade. Hollow grind.
-OAL Length: 9"
-Blade Length: 3"
-HRC tested (3 tests) at 58-60 on shoulder.

-Handle is Deer antler, nickel silver guard, vulcanized spacers, and brass pin.
-Sheath is 8-9oz veg tanned leather, sewn with synthetic sinew. Antler tip detail.

Patch Knife #2
-Steel: 1/8" thick 1084 Forced patina to help protect the blade. Hollow grind.
-OAL Length: 7 3/4"
-Blade Length: 2 1/2"
-HRC tested (3 tests) at 58-60 on shoulder.

-Handle is Deer antler, nickel silver guard, vulcanized spacer, and brass pin.
-Sheath is 8-9oz veg tanned leather, sewn with synthetic sinew. Antler bead detail.

Asking $150 +shipping.

Carving Knife
-Steel: 1/8" thick 1084 Forced patina to help protect the blade. Flat grind.
-OAL Length: 6 1/8"
-Blade Length: 2"
-HRC tested (3 tests) at 58-60 on shoulder.

-Handle is Osage with brass bolster and nickel silver pin. Soldered guard.
-Sheath wrap is 6ish oz veg tanned leather.

Asking $45 +shipping.

Patch #1

Patch #2

Carving

 

[bikerector]

Withdrawn.