Initialconditions
Platinum Member
- Joined
- Jan 6, 2021
- Messages
- 1,181
Trade Interests:
Boker / Daily Knives AK1 (preferably gray / black color schemes. Also, I already have the damsascus reverse tanto)
I'm in Illinois, so if we get a deal done, we'll both ship UPS, fully insured.
My feedback rating is 100% positive on over 100 transactions here on BF. I'm also 100% positive on nearly 500 eBay transactions (username there is jkdedc)
*This is my hobby, for enjoyment purposes. As such, I reserve the right to decline selling/trading with whomever. (IE no feedback or negative feedback).*
Pics and Vids
Deep Cuts Cutlery Midsize Rascal Satin Nitro V, Maple Valley Richlite Scales
No cut, no carry. Comes with original sheath, as shown. 63-64 HRC.
Specs:
.110" Nitro-V Stainless Steel, 63-64 HRC, cryo cycled, wet ground and sharpened
Overall Lenth: ~ 7"
Cutting Edge: ~ 3"
Grind: Full Flat ground
Edge thinness: ~.008"
Blade Finish: tumbled mill rolled flats with raw belt satin bevels
Handle Scales: Maple Valley Richlite scales fastened with stainless screws
Comes with pictured ambidextrous pocket sheath.
Deep Cuts Cutlery Midsize Rascal Blasted CPM-Cruwear, Ravina Scales
No cut, no carry. Comes with original sheath, as shown. 63-64 HRC.
Specs:
.110" CPM CruWear tool steel 64-65 HRC, cryo cycled, wet ground and sharpened
Overall Lenth: ~ 7"
Cutting Edge: ~ 3"
Grind: full flat
Behind the Edge Thinness: ~ .009", thicker slightly towards tip
Blade Finish: blasted and oiled
Handle Scales: .200" Richlite, sandblasted blasted finish, attached with G-Flex epoxy and 304 stainless steel flared tubes.
PLEASE IGNORE THE TRC KNIVES IN THE PICS AND THEIR VIDS... THEY'RE GONE
Boker / Daily Knives AK1 (preferably gray / black color schemes. Also, I already have the damsascus reverse tanto)
I'm in Illinois, so if we get a deal done, we'll both ship UPS, fully insured.
My feedback rating is 100% positive on over 100 transactions here on BF. I'm also 100% positive on nearly 500 eBay transactions (username there is jkdedc)
*This is my hobby, for enjoyment purposes. As such, I reserve the right to decline selling/trading with whomever. (IE no feedback or negative feedback).*
Pics and Vids
Deep Cuts Cutlery Midsize Rascal Satin Nitro V, Maple Valley Richlite Scales
No cut, no carry. Comes with original sheath, as shown. 63-64 HRC.
Specs:
.110" Nitro-V Stainless Steel, 63-64 HRC, cryo cycled, wet ground and sharpened
Overall Lenth: ~ 7"
Cutting Edge: ~ 3"
Grind: Full Flat ground
Edge thinness: ~.008"
Blade Finish: tumbled mill rolled flats with raw belt satin bevels
Handle Scales: Maple Valley Richlite scales fastened with stainless screws
Comes with pictured ambidextrous pocket sheath.
Deep Cuts Cutlery Midsize Rascal Blasted CPM-Cruwear, Ravina Scales
No cut, no carry. Comes with original sheath, as shown. 63-64 HRC.
Specs:
.110" CPM CruWear tool steel 64-65 HRC, cryo cycled, wet ground and sharpened
Overall Lenth: ~ 7"
Cutting Edge: ~ 3"
Grind: full flat
Behind the Edge Thinness: ~ .009", thicker slightly towards tip
Blade Finish: blasted and oiled
Handle Scales: .200" Richlite, sandblasted blasted finish, attached with G-Flex epoxy and 304 stainless steel flared tubes.
PLEASE IGNORE THE TRC KNIVES IN THE PICS AND THEIR VIDS... THEY'RE GONE
Last edited: