CLOSED, PRE-ORDER, 2024, 3" EDC

SpyderPhreak said:
My order (post #27) arrived on Tuesday. Included Magnacut and a swedge. So these are getting fulfilled now, they're awesome folks!

img_4516-jpg.2811335
Click to expand...
JORTS!!!!!!
 
yoko said:
JORTS!!!!!!
Click to expand...
Indeed. I knew you'd like that one! Matching screws too. I'd only do a Magnacut blade like this, I actually like D3V. 🤣

Burton Knut said:
I was wondering what the Scrim Swedge would look like and that’s perfect! I can’t wait!
Click to expand...
Yeah, it's pretty awesome. Kind of regretting not doing ECAM on that one now.
 
SpyderPhreak said:
My order (post #27) arrived on Tuesday. Included Magnacut and a swedge. So these are getting fulfilled now, they're awesome folks!

img_4516-jpg.2811335
Click to expand...
Seeing multiple knives. Makes me kick myself for not ordering two. Great looking knives. Thanks for this post. Was on the verge of sending email to ask when I was getting it. But now I don't have to do that. Love the different micarta colors. Make each knife look very different.
THANK YOU!
 
SpyderPhreak said:
My order (post #27) arrived on Tuesday. Included Magnacut and a swedge. So these are getting fulfilled now, they're awesome folks!

img_4516-jpg.2811335
Click to expand...



That top knife in this picture the ECAM? It looks close to Tricolor scales or are they the same? I was looking on the enclopedia page (well done very helpful I will add) and I didn't see ECAM as an option. Sorry if this has been answered many times in the past
 
2 2018drz400sm
Cwilliams563

Thread 'EDC Pic thread. Post em up!'

With the new EDC 1.2 2024 being released, might as well have a thread to show off the EDC’s. POST EM UP!

They’ll be rolling in hopefully daily for everyone for a while.

Can’t wait to see some of the beauties from the Pre-order, especially those sexy Swedged and satin finishes

What an awesome little EDC knife that screams perfection (as all CPK’s do)! Thank you @Jo the Machinist , Nathan the Machinist Nathan the Machinist , and the whole CPK crew involved for another awesome release, and what very well may be the most popular CPK model 😍 (my prediction), provided the numbers will be there...
  • Like
  • Love
Page 19 Pàdruig Pàdruig has a good example of ECAM (the bottom one)
Page 20 SpyderPhreak SpyderPhreak shows the one you're asking about as being double black and double red micarta.

AR-Trvlr

Post in thread 'CPK Encyclopedia'

Scale Materials

Question re: rubber-insert scales for the choppers produced the following quote from Nathan the Machinist:
First I had to gain about 20 pounds because my old normal ass was too small for the amount of pain-in-the-ass. A full thickness sheet of micarta is skeletonized into a liner with bosses for the fasteners (can't clamp across rubber) and also solid at the front (can't kydex sheath rubber). This is run with the mounting holes complete. A rubber sheet is bonded to a standard liner to make it machinable. This is a sacrificial liner that gets cut away later. It's...
  • Like
  • Love
  • Wow
Encyclopedia calls it Edge Cut Antique , second picture down in Scale Materials
Pàdruig said:
I got my new EDC in the other day and finally got around to checking it out.

I like the changes in the blade design, I find it to be a bit more useful for everyday cutting. That said, I still struggle with its overall size - it's a bit Lilliputian. Smaller fixed blades only work for me if I am not being locked into specific grips. This one seems to want me to hold it a certain way for it to make sense and as such it ends up being too small for the grip to work comfortably. I'll keep playing with it though, this new one isn't so shiny so I can be less careful in applying it to work.

vVsjSET.jpg


GJELYsi.jpg
Click to expand...

SpyderPhreak said:
Mine arrived yesterday. Here are some bad indoor pics I just took...

Swedged D3V with VIP micarta, and blue Ti fasteners.
View attachment 2811332

SWEDGE!!! :cool: I actually thought these swedges were going to be satin, cut after stonewashing. Oh well, still looks sweet!
View attachment 2811334

View attachment 2811337

Next up is double black and double red micarta, D3V, and blue Ti fasteners.

These pieces of micarta are a little different than my previous double black/double red, the layers seem to alternate dark/light, so it looks like layers of yellow and gray mixed with the black and red. Interesting, almost has a Southwestern look to it like this. Almost looks like a 9-layer stackup, black/gray/black/gray/black/red/yellow/red/yellow repeat.
View attachment 2811331

View attachment 2811336

Last up is Magnacut with blue denim micarta, and blue Ti fasteners.

This steel has a slightly darker gray look to it vs. the two above in D3V. Maybe the different steel?
View attachment 2811333

View attachment 2811338

Group shot! Which one is your favorite? I can't decide lol. They're ALL pretty damn awesome!!!! 😁 😍 😎

View attachment 2811335
Click to expand...
 
Cwilliams563 said:
It seems they are produced in batches of the same from the most basic to the most complex that requires the most work, and shipped in those batched orders.

For instance
1st basic tumbled
2nd ghetto grind
3rd w/swedge
4th satin finish
5th satin finish w/swedge
And so on…. At least that’s kinda how the Shiv 2.0 pre-order seemed to go

Not necessarily in that order and not by the number of your post. Possibly the number of your post for the basic tumbled ones
Click to expand...
Makes sense…and I ordered the 5th option.

IMG_7749.gif

A wise man once said, “Good things come to those that wait.” 🤪
 
You must log in or register to reply here.
Back
Top