- Joined
- Sep 10, 2010
- Messages
- 3,756
I really, really hate to sell these but my dog needs an expensive surgery so I'm letting some things go. I'll sell my damn kidney before I let anything happen to my pup.
For sale are now 26 pairs of CNC'd scales for a medium to large blade. These scales were designed to be used for choppers in the 8-13in blade range. It's a larger scales that is great for chopping but svelt enough for fine tasks
A few of these have been sold
The remaining lot is now
ALL SOLD black and tan G10
5 orange and black G10
12 orange g10
9 Terotuf
I will send you the CAD files for the scales so you can have blanks water jet cut to match them, or you can simply bandsaw and grind them to match by hand.
I'll post exact specifics of the scales but they are all 3/8th thick, roughly 5.25 in long, have a hidden lanyard hole, and 3 .260 holes drilled to fit 10-32 screws. I can send you a few samples so you can examine them yourself before buying. I will also walk you through the process for water jetting the blanks to match, tapping the holes properly etc...
These scales are my original design but in this sale I will be assigning over the design aspects of these scales to whoever buys them. So in the future whoever buys them can make more and I will not produce them again.
These cost nearly 2K to make plus countless hours of testing and R&D on the design.
I'm putting these up for sale for $23 per pair, or if you want to buy the remaining lot Ill work out a discount.
For sale are now 26 pairs of CNC'd scales for a medium to large blade. These scales were designed to be used for choppers in the 8-13in blade range. It's a larger scales that is great for chopping but svelt enough for fine tasks
A few of these have been sold
The remaining lot is now
ALL SOLD black and tan G10
5 orange and black G10
12 orange g10
9 Terotuf
I will send you the CAD files for the scales so you can have blanks water jet cut to match them, or you can simply bandsaw and grind them to match by hand.
I'll post exact specifics of the scales but they are all 3/8th thick, roughly 5.25 in long, have a hidden lanyard hole, and 3 .260 holes drilled to fit 10-32 screws. I can send you a few samples so you can examine them yourself before buying. I will also walk you through the process for water jetting the blanks to match, tapping the holes properly etc...
These scales are my original design but in this sale I will be assigning over the design aspects of these scales to whoever buys them. So in the future whoever buys them can make more and I will not produce them again.
These cost nearly 2K to make plus countless hours of testing and R&D on the design.
I'm putting these up for sale for $23 per pair, or if you want to buy the remaining lot Ill work out a discount.
Last edited:
