I have the following for sale.....
4. Blackjack Cutlery / H.G. Long and Co. "OSS / OSE Sleeve Daggers"
Specifications
'Blade' Steel : 440-A
'Blade' Length : 3 1/2 in.
OAL Length : 7 in.
Cast Integral
These are all original H.G. Long and Co. OSS / OSE Sleeve Daggers (produced by BlackJack Cutlery in it's Effingham IL plant). These were made just like the original WW II era sleeve daggers.
These units are unfinished. They were purchased when Blackjack Cutlery closed it's Effingham IL facility. I have attached scans of the 1994 Blackjack Cutlery Catalog in which these were featured in. These sold new for $119.95 (in 1994!).
Condition Note: These are all unfinished products and as such there will be slight variations on each dagger. All are in approximately the same condition as the ones you see in the pics. They ARE NOT 100% NIB as they never were (as of yet), a person could well clean them up and polish them out and make them in a much better condition.
Price: $65.00
30. Cold Steel 'Kwaiken'
Specifications
Blade Steel : Damascus
Blade Length : 6 5/8 in.
OAL Length : 10 in.
Hardwood Sheath and handle w/ cloth carrying case.
There's not a makers mark on this knife to be found. I also DO NOT have the box or papers but the cutlery is indeed a long since discontinued Cold Steel 'Kwaiken' model.
Condition Note : 98%, everything is virtually NIB but there are some VERY minute scratches on the tip of the blade presumably from inserting the knife into the sheath. Worth noting is that the Damascus steel has a VERY light etch. It's not nearly as pronounced as most of the other Damascus that I have experience with. That said, it was somewhat hard to photograph the 'grain' of the Damascus but under the right lighting it is very attractive and appears to be very well made.
Price: $180.00
33. Cold Steel Terminator Push Dagger
Specifications
Blade Steel : 440C Stainless Steel
Blade Length : 3 3/4 in.
OAL Length : 6 in.
Knife comes with original box and leather sheath.
This is Cold Steels first double edged push dagger brought out circa 1990.
Condition Note : This knife is approximately 98% as received from the factory. It has the original edge and has a few very faint scuff marks on the blade, presumably from taking the knife in and out of the leather sheath.
Price: $200.00
As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.
All prices are inclusive of S&H in the U.S., there will be a 4% charge for PayPal, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.
It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.
I reserve the right to refuse sales to anyone for any reason. If you have red rep, I won't sell to you, don't ask! You'd only be wasting your time and energy.
First Ill take it gets the cutlery.
My paypal address is : jj-guns (at) hot mail (dot) com
All trades will be considered at this time.
Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
4. Blackjack Cutlery / H.G. Long and Co. "OSS / OSE Sleeve Daggers"
Specifications
'Blade' Steel : 440-A
'Blade' Length : 3 1/2 in.
OAL Length : 7 in.
Cast Integral
These are all original H.G. Long and Co. OSS / OSE Sleeve Daggers (produced by BlackJack Cutlery in it's Effingham IL plant). These were made just like the original WW II era sleeve daggers.
These units are unfinished. They were purchased when Blackjack Cutlery closed it's Effingham IL facility. I have attached scans of the 1994 Blackjack Cutlery Catalog in which these were featured in. These sold new for $119.95 (in 1994!).
Condition Note: These are all unfinished products and as such there will be slight variations on each dagger. All are in approximately the same condition as the ones you see in the pics. They ARE NOT 100% NIB as they never were (as of yet), a person could well clean them up and polish them out and make them in a much better condition.
Price: $65.00
30. Cold Steel 'Kwaiken'
Specifications
Blade Steel : Damascus
Blade Length : 6 5/8 in.
OAL Length : 10 in.
Hardwood Sheath and handle w/ cloth carrying case.
There's not a makers mark on this knife to be found. I also DO NOT have the box or papers but the cutlery is indeed a long since discontinued Cold Steel 'Kwaiken' model.
Condition Note : 98%, everything is virtually NIB but there are some VERY minute scratches on the tip of the blade presumably from inserting the knife into the sheath. Worth noting is that the Damascus steel has a VERY light etch. It's not nearly as pronounced as most of the other Damascus that I have experience with. That said, it was somewhat hard to photograph the 'grain' of the Damascus but under the right lighting it is very attractive and appears to be very well made.
Price: $180.00
33. Cold Steel Terminator Push Dagger
Specifications
Blade Steel : 440C Stainless Steel
Blade Length : 3 3/4 in.
OAL Length : 6 in.
Knife comes with original box and leather sheath.
This is Cold Steels first double edged push dagger brought out circa 1990.
Condition Note : This knife is approximately 98% as received from the factory. It has the original edge and has a few very faint scuff marks on the blade, presumably from taking the knife in and out of the leather sheath.
Price: $200.00
As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.
All prices are inclusive of S&H in the U.S., there will be a 4% charge for PayPal, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.
It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.
I reserve the right to refuse sales to anyone for any reason. If you have red rep, I won't sell to you, don't ask! You'd only be wasting your time and energy.
First Ill take it gets the cutlery.
My paypal address is : jj-guns (at) hot mail (dot) com
All trades will be considered at this time.
Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
Last edited: